Instruction/ maintenance manual of the product H6187 Grizzly
Go to page of 2
In tr od uc ti on • Operates at 90 PSI • 3.8 CFM air consumption • 95 dB sound level • 1/4” NPT air inlet • 8000 RPM free speed • 460 ft/lbs maximum torque In ve nt or y A. 1 ⁄ 2 " Industrial Impact Wrench ...................... 1 Op er at io n Install 1 ⁄ 2 " drive socke t onto yo ur impact wrench.
H61 87 Parts Break do wn and Li st .
An important point after buying a device Grizzly H6187 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly H6187 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly H6187 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly H6187 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly H6187 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly H6187, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly H6187.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly H6187. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly H6187 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
