Instruction/ maintenance manual of the product H5571 Grizzly
Go to page of 17
COPYRIGHT © SEPTEMBER, 2003 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. PRINTED IN TAIWAN ONLINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE CONFIGURATION OF THE MACHINE AS IT IS CURRENTLY BEING SHIPPED.
For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
H5571 34˚ Framing Nailer Kit -2 - 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts.
H5571 34˚ Framing Nailer Kit -3 - Operating this nailer can propel objects into the air, causing immedi- ate eye damage. To protect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment.
H5571 34˚ Framing Nailer Kit -4 - INTRODUCTION Commentary Most important, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 Fax: (800) 438-5901 E-Mail: techsupport@grizzly.
H5571 34˚ Framing Nailer Kit -5 - Compressed Air System Safety Yoke Mechanism Exceeding the maximum permissible operating pressure may cause the nailer to explode, blowing metal frag- ments in all directions.
H5571 34˚ Framing Nailer Kit -6 - OPERATION Loading Nailer To load your nailer: 1. Disconnect the air supply from the nailer! 2. Pull the magazine pusher all the way back until it locks in place. 3. Place a stick of nails into the maga- zine as shown in Figure 2 .
The nose of the gun houses a depth adjustment knob for setting the depth that the nailer drives nails into the workpiece. To adjust the depth: 1. If the nail is driven too far into the workpiece, rotate the knob clockwise as shown in Figure 4 ) 2. If the nail is not driven far enough into the workpiece, rotate the knob counter clockwise.
-8 - H5571 34˚ Framing Nailer Kit Clearing Jammed Nails The most frequent situation with any type of nailer is a nail jam. A jammed nail must be cleared before using the nailer again. The two places where a nail can get jammed are the magazine and the discharge area.
H5571 34˚ Framing Nailer Kit -9 - Cleaning Nailer Use a good solvent to clean the nose assembly of the nailer. Always be sure that the nailer is dry before using it again. Do not allow dust, chips, sand, etc. into the air connectors or into the body of the nail- er; this may result in leaks and damage to the nailer and the air fittings.
H5571 34˚ Framing Nailer Kit -10 - Replacing Pistons/O-Rings If you use your nailer day in and day out, Grizzly offers repair pistons as cheap insurance against wasted down time and lost profits in the event that a piston or pis- ton shaft becomes worn out.
H5571 34˚ Framing Nailer Kit -11 - H5571 PART BREAKDOWN 25 95 68 84 65 85 67 88 30 28 27 59 26 39 40 38 37 7 92 91 56 24 30 35 29 83 28 82 31 35 66 35 62 97 96 63 64 73 82 74 80 89 90 36 32 34A 61 85.
H5571 34˚ Framing Nailer Kit -12 - 1 PSB115M BTN HD CAP SCR M6-1 X 16 2 PH5571002 EXHAUST COVER 4 PH5571004 RUBBER WASHER 10MM 5 PSB06M CAP SCREW M6-1 X 25 6 PH5571006 CAP 7 PW09M FLAT WASHER 7MM 8 P.
TROUBLESHOOTING Air leaking at trigger valve area. Air leaking between hous- ing and hose. Air leaking between hous- ing and cap assembly. Tool skips nails while dis- charging. Tool runs slowly or has a loss of power. Fasteners frequently jam the nailer.
H5571 34˚ Framing Nailer Kit -14 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main- tenance.
Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number __.
FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT NAIL Name________________________________ Street________________________________.
An important point after buying a device Grizzly H5571 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly H5571 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly H5571 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly H5571 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly H5571 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly H5571, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly H5571.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly H5571. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly H5571 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
