Instruction/ maintenance manual of the product H5570 Grizzly
Go to page of 16
COPYRIGHT © SEPT, 2003 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. PRINTED IN TAIWAN ONLINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE CONFIGURATION OF THE MACHINE AS IT IS CURRENTLY BEING SHIPPED.
For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
H5570 18 Gauge Finish Angle Nailer -2 - 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts.
H5570 18 Gauge Finish Angle Nailer -3 - Operating this nailer can propel objects into the air, causing immedi- ate eye damage. To protect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment.
H5570 18 Gauge Finish Angle Nailer -4 - INTRODUCTION Commentary Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
H5570 18 Gauge Finish Angle Nailer -5 - Compressed Air System Safety Yoke Mechanism The safety yoke is a mechanical device that can fail. Never rely on the safety yoke mechanism as an excuse to point the nailer at yourself or any bystanders. Serious injury may occur.
Oiling Nailer Special oil has been included with your new Grizzly nailer to help maintain its use- ful life. Place one drop of oil in the nailer air inlet (as shown in Figure 1 ) before every use. Wipe off any excess oil near the nail- er exhaust to avoid dust build-up.
H5570 18 Gauge Finish Angle Nailer -7 - Operating Nailer If you have not read the safety instruc- tions in this manual, DO NOT operate the nailer. Before you operate your nailer, place one drop of the included oil into the quick con- nect fitting where the nailer connects to the air supply.
Always disconnect air from nailer whenever clearing a jammed nail! H5570 18 Gauge Finish Angle Nailer -8 - To clear a jammed nail from the dis- charge area on the Model H5570: 1. Disconnect the nailer from the air supply! 2. Pull the spring loaded pusher all the way back and remove the nail stick.
H5570 18 Gauge Finish Angle Nailer -9 - Replacing Pistons/O-Rings If you use your nailer day in and day out, Grizzly offers repair pistons as cheap insurance against wasted down time and lost profits in the event that a piston or pis- ton shaft becomes worn out.
H5570 18 Gauge Finish Angle Nailer -10 - H5570 PART BREAKDOWN.
H5570 18 Gauge Finish Angle Nailer -11 - 01 PSB113M BTN CAP SCR M5-.8 X 11 02 PH5570002 EXHAUST COVER 03 PH5570003 SEAL 04 PSB15M CAP SCREW M5-.8 X20 05 PSS08M SET SCREW M4-.
1. O-rings must be replaced & operation of safety yoke must be checked. 1. Tighten screws. 2. Replace O-ring. 3. Tighten air fitting. 1. Replace damaged seals. 1. Tighten screws and fit- tings. 2. Clean nose. 3. Clean magazine and inspect/repair damage.
H5570 18 Gauge Finish Angle Nailer -13 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main- tenance.
Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number __.
FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street______________________________.
An important point after buying a device Grizzly H5570 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly H5570 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly H5570 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly H5570 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly H5570 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly H5570, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly H5570.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly H5570. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly H5570 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
