Instruction/ maintenance manual of the product H2910 Grizzly
Go to page of 16
COPYRIGHT © JANUARY, 2002 BY GRIZZLY INDUSTRIAL, INC. 1821 VALENCIA ST., BELLINGHAM, WA 98227 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER -2 - 10. USE PROPER EXTENSION CORD for the tool. Make sure your extension cord is in good condition. Conductor size should be in accordance with the chart below. The amperage rating should be listed on the motor or tool nameplate.
H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER -3 - Operating the nailer can propel objects into the air, causing immedi- ate eye damage. To protect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment.
H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER -4 - INTRODUCTION Commentary Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below. Grizzly Industrial, Inc.
H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER -5 - Compressed Air System Safety Yoke Mechanism The safety yoke is a mechanical device that can fail. Never rely on the safety yoke mechanism as an excuse to point the tool at yourself or any bystanders.
H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER -6 - OPERATION Loading The Nailer Depth Adjustment Operating The Nailer To load your nailer: 1. Disconnect the air supply from the nailer! 2. Push the magazine latch in the direc- tion shown in Figure 1 .
H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER -7 - To operate your nailer: 1. Connect the air supply to the quick connect fitting. 2. Test the loaded nailer for proper pen- etration. Hold the nailer perpendicular to the surface of a piece of clean scrap wood that is thick enough for the length of nails you have loaded.
H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER -8 - Cleaning The Nailer Use a good solvent to clean the nose assembly of the nailer. Always be sure that the nailer is dry before using it again.
H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER -9 - Replacing Pistons/O-Rings If you use your nailer day in and day out, Grizzly offers repair pistons as cheap insurance against wasted down time and lost profits in the event that a piston or pis- ton shaft becomes worn out.
H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER -10 - H2910 PART BREAKDOWN 35A 1 2 3 4 6 7 8 9 10 5 11 10 12 13 20 21 22 25 29 26 27 28 23 24 30 31 32 37 39 40 36 41 42 45 57 49 53 43 44 47 48 46 50 51.
H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER -11 - 01 PH2910001 CAP SCREW 02 PH2910002 CAP COVER 03 PH2910003 SEAL 04 PH2910004 CAP SCREW 05 PH2910005 SETSCREW 06 PH2910006 CAP 07 PH2910007 PISTON S.
H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER -12 - TROUBLESHOOTING Air leaking at trigger valve area. Air leaking between hous- ing and hose. Air leaking between hous- ing and cap assembly. Tool skips nails while dis- charging. Tool runs slowly or has a loss of power.
H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER -13 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main- tenance.
Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number __.
FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT X Name________________________________ Street________________________________ Ci.
An important point after buying a device Grizzly H2910 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly H2910 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly H2910 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly H2910 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly H2910 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly H2910, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly H2910.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly H2910. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly H2910 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
