Instruction/ maintenance manual of the product G9908 Grizzly
Go to page of 10
3 FUNCTION HAMMER DRILL MODEL G9908 INSTRUCTION MANUAL COPYRIGHT © 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
G9908 3 Function Hammer Drill -B -.
G9908 3 Function Hammer Drill -1 - SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
G9908 3 Function Hammer Drill -2 - 9. USE PROPER EXTENSION CORD for the tool. Make sure your exten- sion cord is in good condition. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate.
G9908 3 Function Hammer Drill -3 - INTRODUCTION Commentary We are proud to offer the Grizzly Model G9908 3 Function Hammer Drill. The Model G9908 is part of a growing Grizzly family of fine power tools.
G9908 3 Function Hammer Drill -4 - GETTING STARTED Control Location Refer to Figure 1 for the location of the key components and controls of the machine. These controls are called out later in the manual for their specific use when operat- ing. Make sure you are familiar with the controls before using the Hammer Drill.
G9908 3 Function Hammer Drill -5 - OPERATION INSTRUCTIONS Disassembly and improper reassem- bly of this device can result in electri- cal shock danger. Always have this device serviced by a qualified electri- cal repair technician. Serious injury will result.
G9908 3 Function Hammer Drill -6 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main- tenance.
Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number __.
FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street______________________________.
An important point after buying a device Grizzly G9908 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G9908 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G9908 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G9908 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G9908 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G9908, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G9908.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G9908. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G9908 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
