Instruction/ maintenance manual of the product G9004 Grizzly
Go to page of 20
COPYRIGHT ©2000 BY GRIZZLY INDUSTRIAL, INC. 1821 VALENCIA ST., BELLINGHAM, WA 98227 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
.
G9004 Portable Planer -1 - SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
G9004 Portable Planer -2 - 9. USE PROPER EXTENSION CORD for the tool. Make sure your exten- sion cord is in good condition. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate.
G9004 Portable Planer -3 - 1. USE ONLY FOR WOOD. This machine is not designed to process any material other than wood. 2. ALWAYS KEEP FINGERS AND HANDS AWAY FROM ROTATING CUTTERHEAD. Never attempt to clear chips away from the base of the chip chute when the machine is running.
G9004 Portable Planer -4 - CONTROL LOCATION Control Location Refer to Figure 1 for the location of the key components and controls of this Planer. Become familiar with the controls and the adjustments before operating the Planer. Fig 1. Location of controls.
G9004 Portable Planer -5 - The Planer comes with the blades already installed. Check the blades before the first use to make sure they are set properly. To Check Blade Height Setting: 1. Lay a straightedge across the Rear Foot and the Cutterhead. Do not position the straightedge so it contacts the Front Foot.
G9004 Portable Planer -6 - BLADE INSTALLATION The Blade must be mounted to the Back Plate using the Blade Setting Jig. Using this jig controls how far the blade extends from the Cutterhead once it is installed. 1. Place the Blade onto the Setting Jig.
G9004 Portable Planer -7 - The Blade must be completely removed from the Planer and from the Back Plate in order for it to be safely sharpened. Follow the preceding instructions for Blade Removal. The blade set in the G9004 Planer is reversible, so that once one side becomes dull, the blade can be simply reversed to provide a new cutting edge.
G9004 Portable Planer -8 - Setting Cutting Depth Lay a straightedge across the Rear Foot and extend it across the Front Foot. Rotate the cutterhead so neither of the blades are touching the straightedge. Turn the Depth Adjustment Knob until the Front and Rear plates are at the same height (the straight- edge will contact both feet evenly).
G9004 Portable Planer -9 - Chamfering The Front Foot has a V-groove machined into it to allow for edge chamfering. Position the Planer on the corner of the workpiece, with the V-groove seated on the corner. See Figure 7. Be sure the workpiece is firmly secured with clamps or other holding devices.
G9004 Portable Planer -10 - Maintenance Your 110 V Portable Planer will give you hundreds of hours of operation time before ever needing service. This product is dou- ble insulated which provides protection from electrical shock should a problem ever develop with grounding.
G9004 Portable Planer -11 - OPERATING TIPS Disassembly and improper reassem- bly of this device can result in electri- cal shock danger. Always have this device serviced by a qualified electri- cal repair technician. Serious injury will result. Operating Guides and Tips Avoid overloading the planer.
NOTES G9004 Portable Planer -12 -.
G9004 Portable Planer -13 - TROUBLESHOOTING SYMPTOM Motor will not start. Motor will not start; fuses or circuit breakers blow. Motor overheats. Motor arcing visibly through vents or runs erratically. Machine slows when operating. Machine is loud when cutting.
G9004 Portable Planer -14 -.
G9004 Portable Planer -15 - 001 P9004001 Housing Assembly 002 P9004002 Set Screw 003 P9004003 Brush Holder 004 P9004004 Rear Cover 005 P9004005 Brush Terminal 006 P9004006 Grounding Washer 007 P900400.
G9004 Portable Planer -16 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main- tenance.
Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number __.
FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street______________________________.
An important point after buying a device Grizzly G9004 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G9004 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G9004 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G9004 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G9004 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G9004, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G9004.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G9004. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G9004 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
