Instruction/ maintenance manual of the product G6049 Grizzly
Go to page of 17
COPYRIGHT © MAY, 2002 BY GRIZZLY INDUSTRIAL, INC. 1821 VALENCIA ST., BELLINGHAM, WA 98227 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
G6049 14/15 Gauge Angle Finish Nailer Kit -2 - 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neck- ties, rings, bracelets, or other jewel- ry which may get caught in moving parts.
G6049 14/15 Gauge Angle Finish Nailer Kit -3 - Operating this nailer can propel objects into the air, causing immedi- ate eye damage. To protect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment.
G6049 14/15 Gauge Angle Finish Nailer Kit -4 - INTRODUCTION Commentary Most important, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
G6049 14/15 Gauge Angle Finish Nailer Kit -5 - Compressed Air System Safety Yoke Mechanism The safety yoke is a mechanical device that can fail. Never rely on the safety yoke mechanism as an excuse to point the nailer at yourself or any bystanders. Serious injury may occur.
G6049 14/15 Gauge Angle Finish Nailer Kit -6 - OPERATION Loading Nailer To load your nailer: 1. Disconnect the air supply from the nailer! 2. Load nails at the top of the magazine in the T-slot as shown in Figure 1 . 3. Slide the stick of nails all the way down to the nose of the nailer.
G6049 14/15 Gauge Angle Finish Nailer Kit -7 - Operating Nailer Adjusting Depth Besides damaging your workpiece, deflection can cause injury if your free hand is securing the workpiece in the location that the nail deflects. 4. Press the trigger. If the nail drove into the wood far enough, continue with your intended operations.
G6049 14/15 Gauge Angle Finish Nailer Kit -8 - Always disconnect air from nailer whenever clearing a jammed nail! Clearing Jammed Nails The most frequent situation with any type of nailer is a nail jam. A jammed nail must be cleared before using the nailer again.
G6049 14/15 Gauge Angle Finish Nailer Kit -9 - Cleaning Nailer Use a good solvent to clean the nose assembly of the nailer. Always be sure that the nailer is dry before using it again.
G6049 14/15 Gauge Angle Finish Nailer Kit -10 - Replacing Pistons/O-Rings If you use your nailer day in and day out, Grizzly offers repair pistons as cheap insurance against wasted down time and lost profits in the event that a piston or pis- ton shaft becomes worn out.
G6049 14/15 Gauge Angle Finish Nailer Kit -11 - G6049 PART BREAKDOWN 93 7 33 12 14 13 11 10 9 7A 8 24 23 22 35A 20 49 5 50 30A 29 51 52A 6 5A 3 2 92 19 18 27 25 26 60 63 77 76A 66A 1 65 53 55 67A 54 7.
G6049 14/15 Gauge Angle Finish Nailer Kit -12 - 01 P6049001 LOCK NUT 02 P6049002 EXHAUST COVER 03 P6049003 SPRING PLATE 05A P6048005A CAP SCREW SW 06 P6049006 CAP 07A P6048007A BUT TON HD CAP SC R 08 .
TROUBLESHOOTING Air leaking at trigger valve area. Air leaking between hous- ing and hose. Air leaking between hous- ing and cap assembly. Tool skips nails while dis- charging. Tool runs slowly or has a loss of power. Fasteners frequently jam the nailer.
G6049 14/15 Gauge Angle Finish Nailer Kit -14 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main- tenance.
Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number __.
FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT NAIL Name________________________________ Street________________________________.
An important point after buying a device Grizzly G6049 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G6049 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G6049 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G6049 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G6049 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G6049, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G6049.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G6049. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G6049 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
