Instruction/ maintenance manual of the product G6042 Grizzly
Go to page of 20
COPYRIGHT © OCTOBER, 2001 BY GRIZZLY INDUSTRIAL, INC. 1821 VALENCIA ST., BELLINGHAM, WA 98227 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
G6042/G6043 18 Gauge Stapler Kit -2 - 10. USE PROPER EXTENSION CORD for the tool. Make sure your extension cord is in good condition. Conductor size should be in accordance with the chart below. The amperage rating should be listed on the motor or tool nameplate.
G6042/G6043 18 Gauge Stapler Kit -3 - Operating this stapler can propel objects into the air, causing immedi- ate eye damage. To protect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment.
G6042/G6043 18 Gauge Stapler Kit -4 - INTRODUCTION Commentary Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
G6042/G6043 18 Gauge Stapler Kit -5 - Compressed Air System Safety Yoke Mechanism The safety yoke is a mechanical device that can fail. Never rely on the safety yoke mechanism as an excuse to point the stapler at yourself or any bystanders. Serious injury may occur.
G6042/G6043 18 Gauge Stapler Kit -6 - OPERATION Loading Stapler To load your stapler: 1. Disconnect the air supply from the stapler! 2. Push the magazine latch in the direc- tion shown in Figure 1 . 3. Pull back the magazine cover until it stops. Figure 1.
G6042/G6043 18 Gauge Stapler Kit -7 - Operating Stapler If you have not read the safety instruc- tions in this manual, do not operate the stapler. Before you operate your stapler, place one drop of the included oil into the quick con- nect fitting where the stapler connects to the air supply.
Always disconnect air from stapler whenever clearing a jammed staple! G6042/G6043 18 Gauge Stapler Kit -8 - Clearing Jammed Staples The most frequent situation with any type of stapler is a staple jam. A jammed staple must be cleared before using the stapler again.
G6042/G6043 18 Gauge Stapler Kit -9 - Cleaning Stapler Use a good solvent to clean the nose assembly of the stapler. Always be sure that the stapler is dry before using it again. Do not allow dust, chips, sand, etc. into the air connectors or into the body of the sta- pler; this may result in leaks and damage to the stapler and the air couplings.
G6042/G6043 18 Gauge Stapler Kit -10 - Replacing Pistons/O-Rings If you use your stapler day in and day out, Grizzly offers repair pistons as cheap insurance against wasted down time and lost profits in the event that a piston or pis- ton shaft becomes worn out.
G6042/G6043 18 Gauge Stapler Kit -11 - MAINTENANCE NOTES.
G6042/G6043 18 Gauge Stapler Kit -12 - G6042 PART BREAKDOWN 1 2 3 4 5 7 6 8 9 10 11 12 75 71 72 74 13 14A 18 19A 21 19 20 23 24 25 27 26 32 65 64 68 66 67 34 39 35 36 37 38 33 76 8A 40A 61 60 59 57 56.
G6042/G6043 18 Gauge Stapler Kit -13 - 01 P6042001 CAP SCREW 02 P6042002 LOCK WASHER 03 P6042003 CAP 04 P6042004 SEAL 05 P6042005 SPRING 06 P6042006 O-RING 07 P6042007 CAP SEAL 08 P6042008 PISTON HEAD.
G6042/G6043 18 Gauge Stapler Kit -14 - G6043 PART BREAKDOWN 1 2 3 4 5 7 6 8 9 10 11 12 75 71 72 74 13 14A 18 19A 21 22 19 20 23 24 25 27 26 32 65 64 68 66 67 34 39 35 36 37 38 33 76 8A 40A 61 60 59 57.
G6042/G6043 18 Gauge Stapler Kit -15 - 01 P6043001 CAP SCREW 02 P6043002 LOCK WASHER 03 P6043003 CAP 04 P6043004 SEAL 05 P6043005 SPRING 06 P6043006 O-RING 07 P6043007 CAP SEAL 08 P6043008 PISTON HEAD.
TROUBLESHOOTING Air leaking at trigger valve area. Air leaking between hous- ing and hose. Air leaking between hous- ing and cap assembly. Tool skips staples while dis- charging. Tool runs slowly or has a loss of power. Fasteners frequently jam the stapler.
G6042/G6043 18 Gauge Stapler Kit -17 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main- tenance.
Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number __.
FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street______________________________.
An important point after buying a device Grizzly G6042 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G6042 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G6042 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G6042 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G6042 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G6042, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G6042.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G6042. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G6042 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
