Instruction/ maintenance manual of the product G3690 Grizzly
Go to page of 19
COPYRIGHT © 1995 BY GRIZZLY IMPORTS, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC. MARCH, 1995. PRINTED IN USA DISCONTINUED MACHINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE LAST CONFIGURATION OF THE MACHINE BEFORE IT WAS DISCONTIN- UED.
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
I. INTRODUCTION ................................1 II. COMMENTARY ..................................1 III. SAFETY RULES ................................2 IV. UNPACKING ......................................3 V. AIR .....................................
G3690 Grizzly Imports, Inc. - 1 - I. INTRODUCTION II. COMMENTARY The G3690 Angle Finish Nailer is designed for driving and setting clipped head finish nails in most natural and composite wood materials. It is especially suited for cabinetmaking and fas- tening trim moldings.
- 2 - Grizzly Imports, Inc. G3690 III. SAFETY RULES FOR NAIL GUNS 1. NEVER leave the gun connected to an air source when inspecting or maintaining. 2. The gun must be routinely inspected for worn or damaged parts and air leaks. If the gun is faulty, it should be removed from service and labeled, “ DO NOT USE .
G3690 Grizzly Imports, Inc. - 3 - IV. UNPACKING Carefully remove the items packed in the car- ton. It may be a good idea to save the carton and packing material in case it might be need- ed in the future. Upon removal of all items from the package, you should have: 1.
- 4 - Grizzly Imports, Inc. G3690 VI. PRE-USE CHECKS VII. OPERATIONS A. CLEANING Keep the gun nose as clean as possible. Dirt and debris have a tendency to work their way into the gun from the nose. Wipe off any dirt that collects on the outside of the gun before connecting it to the air supply.
G3690 Grizzly Imports, Inc. - 5 - VII. OPERATIONS C. CONNECTING TO AIR To connect the air hose to the air nozzle at the rear of the gun: 1. Pull back on the female hose connector sleeve. 2. Press the fitting onto the nail gun air noz- zle and release the sleeve.
- 6 - Grizzly Imports, Inc. G3690 VII. OPERATIONS D. TEST FIRING Whenever changing fastener size or composi- tion of material being fastened, the gun should be tested to ensure that the air pressure is set correctly and the gun is working properly. To test fire the gun, wear safety glasses and follow the steps below: 1.
G3690 Grizzly Imports, Inc. - 7 - VII. OPERATIONS Caution: If the gun nose is positioned too near the edge of the workpiece or is not held straight, there is a chance that the fastener will either split the workpiece or be deflected. Caution: Compressed air is exhausted out of the top, front of the gun and is directed down toward the gun nose.
- 8 - Grizzly Imports, Inc. G3690 VIII. INSPECTION WARNING: All inspections and/or any main- tenance is to be performed with the air supply disconnected from the tool. Inspect and maintain the following items daily: 1. Check the air gun for any loose bolts or air leaks.
G3690 Grizzly Imports, Inc. - 9 - IX. MAINTENANCE A. JAMMING To repair a jam: 1. Disconnect gun from the air supply. 2. Remove any fasteners remaining in the gun. 3. Open the nose by unlocking the safety clip. 4. Using needle nose pliers, remove any bent fasteners lodged in the gun nose.
- 10 - Grizzly Imports, Inc. G3690 IX. MAINTENANCE B. DAMAGED DRIVER To remove the driver: 1. Disconnect gun from the air supply and remove any fasteners from the maga- zine. 2. Loosen the 4 cap screws securing the gun cap to the gun body sequentially.
G3690 Grizzly Imports, Inc. - 11 - IX. MAINTENANCE X. TROUBLESHOOTING D. TESTING AFTER ASSEMBLY To initially test the gun after a repair pro- cedure: 1. Put on your safety glasses, reduce the regulated air pressure to 30 PSI. Do not put any fasteners into the magazine.
- 12 - Grizzly Imports, Inc. G3690 LIMITED WARRANTY Grizzly Imports, Inc. warrants every product it sells for a period of 1 year to the original pur- chaser from the date of purchase. This war- ranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, acci- dents, repairs or alterations or lack of mainte- nance.
G3690 Grizzly Imports, Inc. - 13 - GRIZZLY MODEL G3690 ANGLE FINISH NAILER Operating Air Pressure: Softwood: ..........................................................................................................80 to 100 PSI Maximum Air Pressure .
- 14 - Grizzly Imports, Inc. G3690 XIV. PARTS DIAGRAM 101 112 113 434 433 433 428 42 6 301 121 123 124 125 114 114A 122 402 401 403 404 441 413 409 405 406 213 302 414 430 431 423 415 438 427 424 436 .
G3690 Grizzly Imports, Inc. - 15 - 305 PSB15M CAP SCREW M5 - 0.8 x 20 306 G2308 QUICK CONNECT 1 / 4 " NPT 401 P3690401 DRIVER GUIDE 402 P3690402 DRIVER GUIDE COVER B 403 PLW03M LOCK WASHER 6mm 404 PSB06M CAP SCREW M6 - 1.0 x 25 405 PLN01M LOCK NUT M4 - 0.
- 16 - Grizzly Imports, Inc. G3690 A Addresses ....................................................1 Air Pressure ................................................3 Air Quality ....................................................3 C Clean Air Hoses ...
An important point after buying a device Grizzly G3690 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G3690 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G3690 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G3690 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G3690 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G3690, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G3690.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G3690. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G3690 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
