Instruction/ maintenance manual of the product G1847 Grizzly
Go to page of 27
NAIL GUNS & STAPLERS MODEL G1847 / G1852 / G1861 / G3811 INSTRUCTION MANUAL COPYRIGHT © 1990 BY GRIZZLY INDUSTRIAL, INC. TX 3 176 561 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers -1- Table Of Contents PAGE 1. SAFETY ....................................................................................................................2 SAFETY RULES FOR ALL TOOLS .................
-2- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers For Your Own Safety Read Instruction Manual Before Operating Nailer Safety Instructions For Power Tools These safety rules cannot cover every situation in a work shop. Consider your conditions when setting up or operating your nailer.
G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers -3- Safety Instructions for Nail Guns 17. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be caref.
-4- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers Grizzly Industrial, Inc. is proud to offer its Model G1847, G1852, G1861 and G3811 Pneumatic Nailers and Staplers. These professional-quality tools are part of Grizzly’s growing family of fine woodworking machinery.
G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers -5- SECTION 3: OPERATIONS If the air fitting is not already screwed in, first be sure the threads are wrapped with teflon tape and then screw it in the back. Teflon tape is available at most hardware stores.
Figure 2. Inserting brads in magazine. Figure 1. Releasing magazine latch. -6- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers To load the nailer: 1. Disconnect the air hose if connected. 2. Lift the magazine latch that holds the maga- zine in place.
Figure 4. Staple placement. Figure 3. Releasing the magazine. G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers -7- To load the stapler: 1. Disconnect the air hose if connected. 2. Press down on the magazine latch that holds the magazine in place. Figure 3.
-8- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers Whenever changing fastener size or composition of material being fastened, the nailer should be tested to ensure that the air pressure is set cor- rectly and the nailer is working properly. To test fire the nailer: 1.
G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers -9- SECTION 4: MAINTENANCE Maintenance requirements are minimal for these nailers. The two most common problems with any nailer are jamming and damaged drivers. In both cases, the nailer will need to be partially disas- sembled to make the repairs.
-10- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers Aligning Nosepiece The nosepiece may become misaligned if the nailer has been dropped or otherwise mishan- dled. Misfiring and/or jamming will result if the nosepiece is misaligned – but correcting the problem is simple.
Figure 6. Stapler driver assembly. Figure 7. Brad driver assembly. G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers -11- Driver Replacement To remove the driver: 1. Disconnect the nailer from the air supply and remove any fasteners from the magazine.
-12- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers O-Rings Since the nailer is disassembled, inspect the con- dition of the visible O-rings. If the O-rings show signs of wear and tear, they should be replaced. Inspect the surfaces where the O-rings seal for any possible rough spots which will erode the new O-rings.
G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers -13- The following pages contain general specifica- tions, a parts diagram and list, and index for your Pneumatic Nailer. If you need parts or help in assembling your nail- er, or if you need operational information, we encourage you to call our Service Department.
-14- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers G1847 PARTS DIAGRAM 101 102 103 104 105 106 107 108 109 110 111 118 119 116 117 112 113 120 121 301 122 123 216 217 218 404 403 407 405 401 402.
G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers -15- REF PART # DESCRIPTION REF PART # DESCRIPTION 101 PSB15M CAP SCREW M5 - 0.8 x 20 102 PLW01M LOCK WASHER 5mm 103 P1847103 DEFLECTOR 104 P1847104.
-16- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers 301 216 217 425 201 214 215 207 208 209 421 427 424 414 416 415 409 413 410 411 412 408 418 417 422 423 419 420 218 426 118 119 116 117 112 113.
G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers -17- REF PART # DESCRIPTION REF PART # DESCRIPTION 101 PSB15M CAP SCREW M5 - 0.8 x 20 102 PLW01M LOCK WASHER 5mm 103 P1847103 DEFLECTOR 104 P1847104.
-18- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers A58 A59 A16 A14 A08 A07 A55 A54 A06 A53 A05 A17 A04 A57 A03 A55 A13 A51 A11 A12 A10 A57 A09 A56 C56 C51 B02 C03 B07 C02 B05 B03 B56 B01 A02 B09.
REF PART # DESCRIPTION REF PART # DESCRIPTION G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers -19- A01 P1861A01 NAILER BODY A02 G2308 AIR FITTING A03 P1861A03 CYLINDER A04 P1861A04 BUMPER A05 P186.
-20- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers G3811 PARTS DIAGRAM A53 A12 C56 C07 A01 A02 C02 C01 C03 C53 C54 C06 A55 A55 A11 A57 A57 A10 A57 A09 A56 A56 A05 A51 A52 A03 A04 A17 A59 A58 A16.
G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers -21- REF PART # DESCRIPTION B04 P3811B04 FIXED PIN B05 P3811B05 SPRING STOPPER B06 P3811B06 PUSHER B07 P3811B07 FIXED PIN B08 P3811B08 PUSHER SPRING B09 P3811B09 FIXED PIN B10 P3811B10 STOPPER B51 P3811B51 E-CLIP B52 PSB17M CAP SCREW M4 - 0.
-22- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers MACHINE DATA GRIZZLY MODEL G1847/G1852/G1861/G3811 PNEUMATIC NAILERS/STAPLERS Operating Air Pressure: 65 to 90 P.S.I. Fastener Length: G1847 .....................................................
G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers -23- TROUBLESHOOTING GUIDE Symptom Cause Solution Air leaking at trigger valve area. O-Rings in trigger valve housing are Replace and/or re-lubricate trigger damaged or dry. system O-Rings. Air leaking between body and nose.
-24- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8" Grinder ___5" - 8" Drill Press ___Mini Lathe ___8" Table Saw ___10".
FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name_____________________________.
An important point after buying a device Grizzly G1847 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G1847 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G1847 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G1847 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G1847 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G1847, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G1847.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G1847. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G1847 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
