Instruction/ maintenance manual of the product G1514 Grizzly
Go to page of 2
Sh ar pe ni ng The mortising bit and chisel must be periodically re-sharp- ened. Sharpen mortising chisels with a round slipstone, working from the inside of the chisel to the edge. Do not sharpen the outside edge. Any burr on the outside edge of the chisel caused by sharpening the inside must be removed with a flat stone.
.
An important point after buying a device Grizzly G1514 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G1514 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G1514 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G1514 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G1514 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G1514, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G1514.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G1514. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G1514 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
