Instruction/ maintenance manual of the product G1131 Grizzly
Go to page of 12
RADIAL DRILL PRESS MODEL G1131 INSTRUCTION MANUAL 1995 BY GRIZZLY IMPORTS, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC.
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
Grizzly Imports, Inc. is proud to offer the Model G1131 Radial Drill Press. When used according to the guidelines stated in this manual, you can expect years of trouble- free, enjoyable operation from this fine machine. The Model G1131 is intended for home and medium-duty professional use.
eral assistance or replacement parts, please contact the appropriate regional service department listed in the introduction. Additional information sources are neces- sary to realize the full potential of this machine. Trade journals, woodworking magazines, and your local library are good places to start.
1. KNOW YOUR POWER TOOL. Read the owner’s manual carefully. Learn the tool’s applications and limitations, as well as its particular hazards. 2. KEEP ALL GUARDS IN PLACE and in working order. 3. GROUND ALL TOOLS. If an adapter is used to accommodate a two-prong receptacle, the adapter plug must be attached to a known ground.
Section 3: Contr ols And Adjustments HEIGHT ADJUSTMENT Table height adjustment on the Model G1131 Radial Drill Press is controlled by a rack-and-pinion gearing system. To control the height of the table: 1. Release the locking lever on the rear of the table’s gear housing, mounted on the vertical column.
ON/OFF SWITCH The Model G1131 Radial Drill Press is equipped with a key-activated ON/OFF switch for added safety. To switch on the drill press: 1. Insert the safety key into the switch mechanism located at the front of the spindle assembly. 2. Flip the key to the ON position.
SPINDLE SPEEDS The Model G1131 features a five-speed belt drive system – so you can adjust drill speeds to match your project. To change spindle speeds: 1. Turn off and unplug the drill press and allow all moving parts to stop. 2. Loosen the tensioning knob located just forward of the motor mount.
SECTION 4 — MACHINE DATA GRIZZLY MODEL G1131 RADIAL DRILL PRESS Design Type ..........................................................................................................Bench Mode l Overall Dimensions: Table Size .......................
SECTION 5 — PARTS LIST & DIAGRAM Diag# Part # Description 1 PG1131001 BASE 2 PG1131002 FLANGE 3 PB07 HEX BOLT 5 / 16 -18X 3 / 4 4 PG1131004 RACK 5 PG1131005 VERT.
43 47 39 37 55 51 50 57 9 8 44 48 58 45 59 75 60 32 31 56 46 1 2 30 3 4 27 34 36 28 28 27 29 42 41 5 40 10 33 20 64 65 66 54 38 61 24 53 22 23 67 68 16 15 36 12 71 73 74 69 7 11 14 13 56 49 76 70 17 1.
Grizzly Imports, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negli- gence, accidents, repairs or alterations or lack of maintenance.
An important point after buying a device Grizzly G1131 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G1131 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G1131 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G1131 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G1131 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G1131, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G1131.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G1131. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G1131 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
