Instruction/ maintenance manual of the product 1554 Grizzly
Go to page of 2
Step 1: Cutting Stile and Rail Edges Make sure the router is disconnected from the power source. Install the stile and rail cutter. (C1551 or C1554.) Attach the router to your router table and adjust the height of the bit until the top of the bead is 1 ⁄ 16 " below the top of your stile.
© May 2003 Grizzly Industrial, Inc. 529003622 Putty Glazer's Point Glass Pane Gap Step 2: Cutting Rail Ends Unplug the router and change bits. Raise the router bit so the top of the bead is 1 ⁄ 16 " below the top of your stock as shown in Figure B.
An important point after buying a device Grizzly 1554 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly 1554 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly 1554 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly 1554 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly 1554 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly 1554, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly 1554.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly 1554. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly 1554 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
