Instruction/ maintenance manual of the product RAPS200E Grindmaster
Go to page of 20
P200E Shuttle & RAPS200E Airpot/Shuttle Br e w er Series Operation and Instruction Manual Installation W ARNING: ELECTRIC SHOCK HAZARD! INST ALLA TION OF THIS APPLIANCE SHOULD BE PERFORMED BY QUALIFIED SERVICE PERSONNEL ONL Y . IMPROPER INST ALLA TION COULD RESUL T IN ELECTROCUTION.
.
Page 2 P200/RAPS200 Brewers Installation (con't.) Electric hook-up 1) The electric ratings for your brewer are printed on its nameplate. T ypical electric ratings are: 120V , 1.65 kW , 15 Amp, 1 phase. 2) The brewer should be connected to its own circuit with a fused disconnect switch or a circuit breaker near the brewer .
Page 3 Operation CAUTION: HOT LIQUID HAZARD W A TER USED FOR BREWING COFFEE IS VER Y HOT . USE CAUTION WHEN BREWING , POURING , OR TRANSPORTING COFFEE. ACCIDENT AL SPILLS MA Y RESUL T IN SEVERE BURNS. 1) Place an empty , warm Shuttle under the brew head.
Page 4 Adjustment s W ARNING: ELECTRIC SHOCK HAZARD DANGEROUS ELECTRIC VOL T AGES ARE PRESENT NEAR ADJUST ABLE COMPONENTS. ALL ADJUSTMENTS SHOULD BE PERFORMED BY QUALIFIED SERVICE PERSONNEL ONL Y . All adjustable component s are located under the top cover .
Page 5 Thermost at Adjustment The thermostat controls the water temperature in the t ank. Factory setting is 195 degrees F . This is the ideal temperature for brewing coffee. W ater should never boil in the tank. If water is boiling in the tank, adjust the temperature appropriately .
Page 6 Weekly or Bi-W eekly , Depending on Use (P200 Only): 1) Fill Shuttle with one gallon of hot water . 2) Pour the recommended concentration of urn cleaner into the Shuttle liners (Excessive amounts of cleaner will attack the st ainless steel). Urn cleaners that have been used successfully: DIP-IT , manufactured by Economics Laboratories, Inc.
Page 7 P200/RAPS200 Brewers T o Drain The Water T ank CAUTION: HOT LIQUIDS / BURN HAZARD W A TER IN T ANK IS VER Y HOT . USE CAUTION WHEN DRAINING T ANK. ACCIDENT AL SPILLS MA Y RESUL T IN SEVERE BURNS. 1) Shut off power to brewer . 2) Remove the top panel.
Page 8 T roubleshooting: Filling, Heating, and Brewing Overfilling watert ank even when power is off. Fill valve not sealing properly . Fill valve installed backwards. W ater entering t ank continuously , usually slowly . Disassemble valve and clean out dirt.
Page 9 T roubleshooting: Filling, Heating, and Brewing (con’t.) T ank does not heat. Thermostat faulty or out of calibration. Heater faulty . Make sure thermostat is turned on. Check resistance across elements with wires disconnected. Recalibrate thermostat.
Page 10 T roubleshooting: Filling, Heating, and Brewing (con’t.) Brewing Problems The brewing system consists of the following component s: • St art and Stop switches , located on the front control panel. • Brew Timer , located in the top control section under the top cover .
Page 1 1 P200/RAPS200 Brewers Exploded V iew for the P200-E ITEM DESCRIPTION P ART #.
Page 12 P200/RAPS200 Brewers Exploded V iew for the P200 (G version only) ITEM DESCRIPTION P ART #.
Page 13 P200/RAPS200 Brewers Exploded V iew for the RAPS200-E ITEM DESCRIPTION P ART #.
Page 14 P200/RAPS200 Brewers Exploded V iew for the RAPS200 (G version only) ITEM DESCRIPTION P ART #.
Page 15 P200/RAPS200 Brewers Rough-In Drawing for the P200-E.
Page 16 P200/RAPS200 Brewers Rough-In Drawing for the RAPS200-E.
Page 17 P200/RAPS200 Brewers Wiring Diagram for P200-E/RAPS200-E.
.
W ARRANTY for P200/RAPS200 Series GENERAL W ARRANTY INFORMA TION Grindmaster maintains the highest st andard of quality control in the manufacturing of American Metal W are products. W e use the finest component s and materials, and employ quality engineering standards and tests.
An important point after buying a device Grindmaster RAPS200E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grindmaster RAPS200E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grindmaster RAPS200E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grindmaster RAPS200E you will learn all the available features of the product, as well as information on its operation. The information that you get Grindmaster RAPS200E will certainly help you make a decision on the purchase.
If you already are a holder of Grindmaster RAPS200E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grindmaster RAPS200E.
However, one of the most important roles played by the user manual is to help in solving problems with Grindmaster RAPS200E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grindmaster RAPS200E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
