Instruction/ maintenance manual of the product 308603 Graco Inc.
Go to page of 2
308603 Rev . G INSTRUCTIONS-P ARTS LIST T exture Flexhead and Pole Spray Guns 100 psi (7 bar) Maximum Air and Fluid Working Pressure Model 238080, Series B T exture Flexhead Spray Gun Model 238807, Se.
When spraying small, confined areas , use the valve and knob to make fine adjustments without adjusting the pump. Material flow adjustments (Fig. 1) For a lighter spray pattern, adjust the air needle (18) closer to the fluid tip and/or reduce the fluid pressure.
An important point after buying a device Graco Inc. 308603 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Graco Inc. 308603 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Graco Inc. 308603 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Graco Inc. 308603 you will learn all the available features of the product, as well as information on its operation. The information that you get Graco Inc. 308603 will certainly help you make a decision on the purchase.
If you already are a holder of Graco Inc. 308603, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Graco Inc. 308603.
However, one of the most important roles played by the user manual is to help in solving problems with Graco Inc. 308603. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Graco Inc. 308603 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center