Instruction/ maintenance manual of the product C Series-3G American Acoustic Development
Go to page of 17
C S eries-3G Loudspeakers Owner s Informa tion '.
C Series-3G Loudspeakers Owner's Information Introduction Thank you for choosing loudspeakers. Their refined and natural sound character will greatly enhance your listening pleasure. Great attention to detail has gone into the design and manufacturing of loudspeakers, which are built with only the finest materials.
4. Precise stereo imaging. Close tolerance pair matching of drivers ensure a stable stereo image. Minimal phase crossovers ensure great depth and width of the sound stage.
C-44W C-45 C-44 C-550 C-660 C-880.
Placement Two Channel Stereo Application For stereo listening, you may choose any one pair of bookshelf or floor standing model. The size of speakers should be determined by the size of your living space so that they can provide suf ficient volume. The two loudspeakers should be placed an equal distance from your listening position.
Depending on the shape of your room (etc.), you may wish to place the rear speakers behind you instead of on the side walls. In this case, you can use a pair of lar ge floor standing speakers matching your front speakers. Connections Note: Make sure your amplifier is off and disconnected from power while you are connecting speakers to amplifier.
Note: make sure the metal links are in place. Bi-Wiring Bi-wiring increases the flow of current and will usually improve the sound quality. This method uses two pair of cables: one pair for the upper two terminals and one pair for the bottom two terminals (see Fig.
C-11 Powered Subwoofer Owner's Information Important Instructions 1. Read your owner's manual carefully before using the product. Retain this manual for future reference. 2. The subwoofer should be placed at a ventilated, dry and cool location, away from any heat sources such as radiators or amplifiers.
proprietary 8 ” drivers, the C-11 produces clean, powerful and controlled bass. Three large rear -firing vents ensure ventilation of both driver and amplifier for cool running at high power . The vent's large bore and “ gas flowed ” cross-section reduces air turbulence that causes audible distortion.
Power switch on/off Upper position: Power on Lower position: Power off Middle position: Auto on At this position the subwoofer amplifier is in a stand by mode, awaiting an input signal. When there is no signal, the amplifier is shut down. As soon as the signal appears, the amplifier switches on.
1-10 pressure wave. Y ou can use this position if you are unable to get a good integration between the subwoofer and main speakers. Equalizer on/off At “off” position, the amplifier will function normally without the effect of the 5-band equalizer .
1-11 Connection Please see diagrams below for different method of connecting the subwoofer to your main amplifier/receiver . It may be possible to use alternative connecting methods. Please refer to the owner's manual of your amplifier/receiver or seek professional advice from your retailer or installer .
.
Setting up EQ or the Room Play some familiar pieces of music that have prominent bass lines. Start with the EQ switched out and then adjust the EQ filters one by one switching the EQ in and out. It is better to start with the EQ cutting the frequencies and not boosting them.
General Care The loudspeaker cabinet may be cleaned with a slightly damp cloth. Grilles should be kept on the speakers to protect the drive units when the speakers are not being played.
1-15 C series-3G Specification Standard Cabinet Finish: Cherry/Classic Black(viny1) C-150 89 377x191x251 C-550 940x222x282 C-660 20-200 1050x257x322 30-20 C-880 20-250 1253x299x377 92 25-20 C-204 88 20-100 156x494x195 70-20 C-305 89 20-150 191x529x250 40-20 C-44 20-80 80-20 C-44W 20-80 260x156x151 259x263x91 80-20 C-45 2 4 89 20-100 259x287x143 8.
www.aadsound.com.
An important point after buying a device American Acoustic Development C Series-3G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Acoustic Development C Series-3G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Acoustic Development C Series-3G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Acoustic Development C Series-3G you will learn all the available features of the product, as well as information on its operation. The information that you get American Acoustic Development C Series-3G will certainly help you make a decision on the purchase.
If you already are a holder of American Acoustic Development C Series-3G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Acoustic Development C Series-3G.
However, one of the most important roles played by the user manual is to help in solving problems with American Acoustic Development C Series-3G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Acoustic Development C Series-3G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
