Instruction/ maintenance manual of the product 237413 Graco Inc.
Go to page of 18
5 GAL. (20 LITER) ST AINLESS STEEL (ASME) PRESSURE POT AirPro t Air Spray Package Fine–finish spray package for waterborne and solvent–based fluids.
2 308455 T able of Contents W arnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ground the system 6 . . . . . . . . . . . . .
3 308455 W ARNING INSTRUCTIONS EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture, malfunction or start unexpectedly and result in serious injury . D This equipment is for professional use only . D Read all instruction manuals, tags, and labels before operating the equipment.
4 308455 Setup CAUTION This equipment is compatible with most water-based materials. See the wetted parts in the T echnical Data section and your fluid and solvent manufactur- er ’s compatibility information.
5 308455 Setup Fig. 1 B C 17b 17a 18 36 13 33 42 A D 4 KEY Components you must supply: A Bleed-type master air valve Required for pump; order part no. 1 10223, 1/4” npt(f) B Air filter .
6 308455 Setup III. Unpack the system. 1. In addition to the assembled unit, these compo- nents are packed loosely or separately: hose set, gun, instruction manuals. These are the manuals you should receive: 308369 Pressure pot 308167 Air regulator 312414 HVLP spray gun (Model 237413) 312414 Air spray gun (Model 237409) IV.
7 308455 System Component Information I. How to use the AirPro gun See Fig. 2. 1. Make all fluid and air adjustments at the pressure pot for maximum efficiency . Refer to page 8. 2. If you make adjustments at the gun, take note of what you do. Then, if the results are not satisfac- tory , you can easily return the gun to its previous adjustment.
8 308455 System Component Information II. How to adjust the air regulators. See Fig. 4. 1. Always open air regulators slowly to prevent surging during startup. 2. As you look at the system, the regulator (36) on the right controls air to the gun and the regulator (33) on the left controls air to the pressure pot.
9 308455 Operation I. Pressure Relief Procedure. W ARNING PRESSURIZED EQUIPMENT HAZARD The system pressure must be manually relieved to prevent the system from starting or spraying acci- dentally .
10 308455 Operation IV. Set the fluid and air pressure. 1. With the system primed and the gun air regulator closed (36), trigger the gun and adjust the pressure po t air regulator (33). Refer to Fig. 5. If available, use the pressure setting provided by your fluid supplier .
11 308455 Flushing I. When to flush. D Before the first time use D When changing colors D Before fluid can dry or settle out in a dormant system (observe the recommended fluid pot life on catalyzed fluids) D Before storing the system II. How to flush.
12 308455 Parts Model 237409, Series B Includes items 1 to 44 Ref. No. Part No. Description Qty . Ref. No. Part No. Description Qty . 1 100361 PLUG 1 2 100840 ELBOW, street, 1/4-18 npt(m x f) 2 3 164724 HOSE, coupled, 1/8-27 npt(m) 1 4 103347 PRESSURE RELIEF V AL VE, 100 psi (0.
13 308455 Parts 44 17 35 32 37 33 38 39 2 19 17 39 38 37 3 7 11 8 5 14 2 4 36 1 9 20 15 30 31 18 16 12 22 6 23 10 21 42 27b, 27c 27a 27 Model 237409, Series B Includes items 1 to 44 13 43 40 ti0748B.
14 308455 Parts Model 237413, Series A Includes items 1 to 44 Ref. No. Part No. Description Qty . Ref. No. Part No. Description Qty . 1 1 10476 ADAPTER, union, straight swivel, 3/8 npt(m) to 1/4 npsm(f) 1 2 100840 ELBOW, street, 1/4-18 npt(m x f) 2 3 164724 HOSE, coupled, 1/8-27 npt(m) 1 4 103347 PRESSURE RELIEF V AL VE, 100 psi (0.
15 308455 Parts Model 237413, Series A Includes items 1 to 44 35 32 34 25 1 2 19 17 39 38 37 3 7 11 8 5 14 2 4 9 20 15 30 31 18 16 12 22 6 23 10 21 42 27b, 27c 27a 27 17 36 44 13 33 43 40 TI0849B.
16 308455 Notes.
17 308455 T echnical Data Maximum Fluid Working Pressure 100 psi (0.7 MPa, 7 bar) . . . . . . . . . . . . . . . . . . . Maximum Air W orking Pressure 100 psi (0.7 MPa, 7 bar) . . . . . . . . . . . . . . . . . . . . . Gun Air Consumption See manual 312414 .
18 308455 Graco Standard W arranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use.
An important point after buying a device Graco Inc. 237413 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Graco Inc. 237413 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Graco Inc. 237413 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Graco Inc. 237413 you will learn all the available features of the product, as well as information on its operation. The information that you get Graco Inc. 237413 will certainly help you make a decision on the purchase.
If you already are a holder of Graco Inc. 237413, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Graco Inc. 237413.
However, one of the most important roles played by the user manual is to help in solving problems with Graco Inc. 237413. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Graco Inc. 237413 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
