Instruction/ maintenance manual of the product 223391 Graco Inc.
Go to page of 2
GUN NOT INCLUDED INSTRUCTIONS-P ARTS LIST 308–01 1 Rev A SPRA Y GUN EXTENSION 4050 psi (280 bar) MAXIMUM WORKING PRESSURE Model 223–390 12 in. (305 mm) long Model 223–391 18 in. (457 mm) long Model 223–392 24 in. (610 mm) long Fits all Graco high pressure spray guns.
INST ALLA TION P ARTS LIST Follow the Pressure Relief Procedure on the first page. See the drawing below for assembling the extension. Before installing the spray tip, start and prime the sprayer . Install the tip in the tip guard and be sure to install the tip gasket.
An important point after buying a device Graco Inc. 223391 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Graco Inc. 223391 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Graco Inc. 223391 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Graco Inc. 223391 you will learn all the available features of the product, as well as information on its operation. The information that you get Graco Inc. 223391 will certainly help you make a decision on the purchase.
If you already are a holder of Graco Inc. 223391, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Graco Inc. 223391.
However, one of the most important roles played by the user manual is to help in solving problems with Graco Inc. 223391. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Graco Inc. 223391 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center