Instruction/ maintenance manual of the product IO-101G Goodman Mfg
Go to page of 8
INST ALLA TION & OPERA TING INSTRUCTIONS for SPLIT SYSTEM CONDENSING UNITS All information contained herein is subject to change without notice. Goodman Manufacturing Compan y , L. P. I0-101G 2550 North Loop West, Suite 400, Houston, TX 77092 06/04 ww w .
2 IO-101G 06/04 INDEX Important Message to Homeowner ...................... 2 Codes and Regulations ....................................... 2 Inspection ............................................................ 2 Replacement Parts .................
3 IO-101G 06/04 This “close to the wall” application minimizes exposed tubing and wiring and reduces the space for children to run around the unit. This will help to avoid possible damage to the tubes or wiring and/or personal injur y. Service Access 18" Min.
4 IO-101G 06/04 consideration is given the weather-tight integrity of the roof. The condensing unit contains moving components and can vibrate; therefore, sound is also a consideration in rooftop application.
5 IO-101G 06/04 The recommended procedure for processing and charge adjustment is as follows: 1. Connect vacuum pump to both base valve service ports. 2. Evacuate tubing and evaporator through liquid and suction base valve ports, to 500 microns or less for a minimum of 30 minutes.
6 IO-101G 06/04 SPECIAL NOTE: Systems with MORE than 15’ of interconnecting tubing, please refer to Table 5 for line charge allowance per foot of tubing. LINE LIQUID SUCTION O. D. (IN) LINE LINE 1/4 0.22 3/8 0.58 1/2 1.14 5/8 1.86 0.04 3/4 0.06 7/8 0.
7 IO-101G 06/04 CONTROLS SHOWN WITH UTILITIES IN 'ON'POSITION LOW VOLTAGE DEFROST RELAY OUTDOOR THERMOSTAT (OPTIONAL) HIGH VOLTAGE DEFROST RELAY AND THERMOSTAT IN 'OFF' POSITION.
8 IO-101G 06/04 NOTE: SPECIFIC ATIONS AND PERFORMANCE D ATA LISTED HEREIN ARE SUBJECT T O CHANGE WITHOUT NOTICE Quality Makes the Difference! All of our systems are designed and manufactured with the same high quality standards regardless of size or efficienc y .
An important point after buying a device Goodman Mfg IO-101G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Goodman Mfg IO-101G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Goodman Mfg IO-101G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Goodman Mfg IO-101G you will learn all the available features of the product, as well as information on its operation. The information that you get Goodman Mfg IO-101G will certainly help you make a decision on the purchase.
If you already are a holder of Goodman Mfg IO-101G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Goodman Mfg IO-101G.
However, one of the most important roles played by the user manual is to help in solving problems with Goodman Mfg IO-101G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Goodman Mfg IO-101G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
