Instruction/ maintenance manual of the product GN 6110 GN Netcom
Go to page of 18
2 English – GN 6110 user guide This user guide provides you with information on setting up, using and maintaining your GN 6110. CONTENTS 1. Product information 1.1 GN 6110 – what’s in the box 1.2 Parts and signatures 2. Assembling your GN 6110 2.
3 1.1 GN 6110 – What’s in the box 1 GN 6110 headset, with built-in rechargeable battery 2 GN 6110 base (connectivity unit) 3 Connection cord for telephone connection 4 Power adapter with cord 5 Quick Set Up guide 6 User guide 7 Cord management strips 8 Headset travel charger (90-240 V) 1.
4 2. Assembling your GN 6110 First assemble your GN 6110 to work with your desk telephone, and then set it up to work with your mobile phone. The GN 6110 supports the GN 1000 Remote Handset Lifter for desk telephones. See Section 4.3 for hook switch set up instructions and use.
5 Pairing of headset to the base and verifying pairing The headset and the base in their original product box have been factory-paired to ensure proper functioning of your GN 6110. You do not need to pair these two devices, and you may now proceed to the Clear dial tone adjustment section.
6 2.2 Setting up for mobile telephone use The GN 6110 headset is also compatible with Bluetooth mobile phones. The mobile phone you use with your GN 6110 must be Bluetooth technology-equipped.
7 Turning headset OFF: Close the headset boom arm. The headset indicator lights for 2 seconds, after which it will turn off. Making calls: 1. With the boom arm open, press the Multifunc- tion Button on either the headset [C] or the base [B] . An audible tone will be heard and the con- nection will be established shortly.
8 3.2 Operation – with mobile telephone If your headset is in its base, press the release headset button to free the headset before using it. Turning headset ON: Open the headset boom arm. The headset indicator lights for 2 seconds, and then continue to fl ash slowly as long as the headset is on.
9 Headset <-- --> mobile phone switching (while on a call). To switch from using the headset to mobile phone during a call: 1. Terminate the link between the headset and the mobile phone by closing the headset boom arm [A] Note: do not press the Multifunction Button.
10 You will need to make 2 calls to adjust the volume match, one using your mobile phone and the other using the desk telephone. 1. Open the compartment cover on the bottom of the base and locate the black volume match button [A] 2.
11 To connect your GN 1000 to the GN 6110, complete the following: 1. Connect the GN 1000’s connector cord to the yellow-marked hook switch [AUX] socket on the bottom of the base [A] .
12 2. You may continue wearing your headset, or replace the (closed) headset boom arm in the base for charging. Headset <-- --> handset switching (while on a call) To switch from using the headset to the handset during a call: 1. Pick up the telephone’s handset [A] .
13 Battery charge indication The headset indicator lights to indicate charging, and will turn off when fully charged. The 4 lights of the battery indicator show the approximate battery charge level of the headset: • 1 lit indicator represents 25% of a full charge (will fl ash if less than 25%) • 4 lit indicators represent a full charge.
14 Successful pairing will be indicated by 10 rapid fl ashes of both the headset indicator and the pairing indicator. A beep will also be heard in the headset. Verifying pairing To verify pairing, create an audio link between the headset and base by completing the following: 1.
15 The headset’s audio indicators: Headset action Audio indication Volume Limit Repeated single high tone when min. or max. limits achieved (when button is pressed) Low Battery Tone Two rapid high t.
16 Base’s multifunction indicator Multifunction indicator Battery indication Number of lit indicators indicates level of charge 1 fl ashing indicator < 25% charged 1 lit indicator = 25% charged .
17 What is the clear dial tone adjustment for? Desk telephones operate on a wide range of standards and use different kinds of internal compo- nents. The GN 6110 works with a very wide range of desk telephones, but it still must be set to match your desk telephone’s standard.
18 Declaration This product is CE marked according to the provisions of the R & TTE Directive (99/5/EC). Hereby, GN Netcom as declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
19 5. If the telephone company requests information on what equipment is connected to their lines, inform them of: (a) The telephone number that this unit is connected to.
An important point after buying a device GN Netcom GN 6110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GN Netcom GN 6110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GN Netcom GN 6110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GN Netcom GN 6110 you will learn all the available features of the product, as well as information on its operation. The information that you get GN Netcom GN 6110 will certainly help you make a decision on the purchase.
If you already are a holder of GN Netcom GN 6110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GN Netcom GN 6110.
However, one of the most important roles played by the user manual is to help in solving problems with GN Netcom GN 6110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GN Netcom GN 6110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center