Instruction/ maintenance manual of the product ULTRACOM CXI Glowworm Lighting
Go to page of 16
www.glow-worm.co.uk 1 www.glow-worm.co.uk To be left with the user Instructions f or Use High Efficiency Condensing Boilers Ultracom cxi.
www.glow-worm.co.uk 2 WARNING GAS LEAK OR FAULT Turn off the gas emergency control valve immediately. Eliminate all sources of ignition, i.e.smoking, blowlamps, hot air guns etc. Do not operate electrical lights or switches either on or off. Open all doors and windows, ventilate the area.
www.glow-worm.co.uk 3 13206 G.C. No. 47-019-01 G.C. No. 47-019-02 G.C. No. 47-019-03 Ultracom 24cxi Ultracom 30cxi Ultracom 38cxi.
www.glow-worm.co.uk 4 Contents P age Important Information 5 Boiler Design and Clearances 6 Boiler Safety Devices 7 Servicing, Maintenance and Spare Parts 8 User Control Panel 9 Lighting the Boiler 10.
www.glow-worm.co.uk 5 Gas Safety (Installation and Use) Regulations In your own interests and that of safety, it is the Law that ALL gas appliances have been installed by a competent person in accordance with the current issue of these regulations.
www.glow-worm.co.uk 6 Boiler Design and Clearances Description These boilers are designed for use as part of a sealed water central heating system with fully pumped circulation. The pump, expansion vessel and associated safety devices are all fitted within the boiler.
www.glow-worm.co.uk 7 Boiler Safety Devices Boiler Shutdown The boiler software is designed to recognise the potential for an overheat lockout and will shutdown before this happens.
www.glow-worm.co.uk 8 General Note Servicing/maintenance should be carried out by a competent person in accordance with the rules in force in the countries of destination.
www.glow-worm.co.uk 9 User Contr ol Panel General Description The User Control panel consists of three toggle buttons, a reset button and display, which will indicate with symbols the status of the boiler, refer to diagram 2.
www.glow-worm.co.uk 10 Initial Lighting Remove the cover plate, refer to the fault finding section on page 15 and diagram 8. Check that all isolating valves and the gas service cock on the appliance are open and that water flows from the hot water taps, then close taps, refer diagram 3.
www.glow-worm.co.uk 11 Adjusting T emperatur e 13178 Diagram 4 13179 Domestic Hot Water Central Heating Domestic Hot Water Domestic hot water has priority over central heating. The temperature is factory preset to the minimum 40 O C, but can be adjusted to a maximum of 62 O C as required, refer to diagram 4.
www.glow-worm.co.uk 12 To set the clock, refer to diagram 5. Setting the 24 hour Clock Diagram 5 13177 STEP 1 STEP 2 MODE PROG MODE PROG STEP 3 Press and hold "PROG" 5 secs. the "hours" symbol will flash. Press "PROG" to confirm.
www.glow-worm.co.uk 13 24hr Timed Central Heating Factory preset timed intervals are:- ON 6.00 - OFF 8.00 ON 16.00 - OFF 23.00 Setting the Pr ogrammer Diagram 6 13468 To alter the times to suit your requirments, follow "Steps" 1 to 4 MODE PROG Flashing cursor .
www.glow-worm.co.uk 14 Advancing the Pr ogrammer Advancing the timed central heating programmer ON /OFF times This function will only work when the appliance is in timed operating mode, "Clock symbol". Refer to diagram 2. The activated/deactivated segments will flash for 5 seconds.
www.glow-worm.co.uk 15 Double Check Inlet V alve V AL VES SHOWN CLOSED Appliance fails to light The LCD will display a flashing 'F' and code number, press the reset button on the control panel, see diagram 2. If the display shows a flashing pressure of 0.
www.glow-worm.co.uk 16 Because of our constant endeavour for improvement, details may vary slightly from those shown in these instructions. Glow-worm, Nottingham Road, Belper, Derbyshire.
An important point after buying a device Glowworm Lighting ULTRACOM CXI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Glowworm Lighting ULTRACOM CXI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Glowworm Lighting ULTRACOM CXI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Glowworm Lighting ULTRACOM CXI you will learn all the available features of the product, as well as information on its operation. The information that you get Glowworm Lighting ULTRACOM CXI will certainly help you make a decision on the purchase.
If you already are a holder of Glowworm Lighting ULTRACOM CXI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Glowworm Lighting ULTRACOM CXI.
However, one of the most important roles played by the user manual is to help in solving problems with Glowworm Lighting ULTRACOM CXI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Glowworm Lighting ULTRACOM CXI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
