Instruction/ maintenance manual of the product RBS10 Global Machinery Company
Go to page of 11
RBS10 MAN RBS10 10/01 INSTRUCTION MANU AL 245mm Band Sa w • Melbourne • Perth • Auckland • Hong K ong • Shanghai • T aipei • New Y ork • V erona • London • P aris.
Contents W arr anty 2 Introduction 3 Specifications 3 Safety instructions 3 Additional safety rules f or saws 5 Unpacking 6 Assembly 6 Know y our product 7 Setting up 8 Operation 10 Maintenance 10 Ful.
Specifications Nominal voltage: 230 – 240 V ac~ 50 Hz Wattage: 370W Band speed: 700m/min Dimensions: 860 mm x 420 mm x 530 mm Working table: 340 mm x 335 mm (adjustable between 0 - 45º) T able height from floor: 370 mm Width of throat: 245 mm Max.cutting height: 100 mm Saw blade length: 1,712 mm Saw blade width: 10 mm (3 to 12.
2. Consider the environment in which you are working. Do not use power tools in damp or wet locations. K eep the work area well lit. Do not expose power tools to rain and high humidity. Do not use power tools in the presence of flammable liquids or gases .
replaced by an authorised service facility. Do not use a tool if the switch does not turn the tool on and off correctly. 20. Guard against electric shock. Prevent body contact with grounded objects such as water pipes, radiators , ranges and refrigerator enclosures.
Unpacking Due to modern mass production techniques, it is unlik ely that your GMC Power T ool is f aulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified.
Know y our product 1. Saw blade 2. Upper wheel housing 3. Saw band tensioning knob 4. Lower wheel housing 5. Saw band tensioning knob 6. Motor shaft (not shown) 7. Drive belt (not shown) 8. ON button 9. OFF button 10. T able insert 11. Rip fence 12. Rip fence scale 13.
Setting up Centring the table 1. Loosen the screws holding the table trunnion bracket 2. Move the table until the saw blade is positioned in the centre of the table insert 3. Tighten the bracket screws ensuring that the table does not move . Setting the table squar e with the saw blade 1.
Changing the saw band W arning. Ensure that the mains plug is removed from the power socket The saw is supplied with a general-purpose woodcutting blade . 1. T o change the blade , first remove the rip fence scale . 2. Slacken the blade tension by rotating anti-clockwise the blade tensioning knob on the top of the upper wheel housing.
Operation Switching on and o ff 1. Connect the plug to the power supply. 2. Depress the ON button. 3. T o switch off, depress the OFF button. NOTE. 1. The saw must be connected to an earthed outlet and should be operated on a residual current device (RCD) of 30 mA capacity.
Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New.
An important point after buying a device Global Machinery Company RBS10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Global Machinery Company RBS10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Global Machinery Company RBS10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Global Machinery Company RBS10 you will learn all the available features of the product, as well as information on its operation. The information that you get Global Machinery Company RBS10 will certainly help you make a decision on the purchase.
If you already are a holder of Global Machinery Company RBS10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Global Machinery Company RBS10.
However, one of the most important roles played by the user manual is to help in solving problems with Global Machinery Company RBS10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Global Machinery Company RBS10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
