Instruction/ maintenance manual of the product POL1450 Global Machinery Company
Go to page of 16
POL1450 030901 Ed8 DR.
Contents W arranty 2 Introduction 3 Environment al protection 3 Description of s ymbols 3 Specifications 3 Safety instructions 4 Additional safety rules f or sanders 5 Additional safety rules f or ang.
Description of s ymbols The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use . Wear hearing protection. Wear eye protection. Wear breathing protection. Double insulated for additional protection.
Safety instructions The tool must be used only for the prescribed purpose . Any uses other than those mentioned in this manual will be considered a case of misuse . The user and not the manufacturer shall be liable f or any damage or injury resulting from such cases of misuse .
9. Connect dust extr action equipment. If devices are provided for the connection o f dust extraction and collection facilities , ensure that these are connected and properly used. 10. Do not abuse the po wer cor d. Never pull the cord to disconnect the tool from the power point.
6 • Check the disc before mounting it into the angle grinder . Check by striking it with a wooden handle whilst balancing the disc on your finger . Listen for the ring and do not use if dull, as the disc may be cracked. • When the disc is installed, run it for at least one minute to ensure that it does not have a fault.
• When sanding wood, always connect the dust bag or use a dust extraction system. • Before using the sander with metal, always remove the dust bag from the outlet as sparks may ignite the dust or the bag. • Do not continue to use worn, torn or heavily clogged sanding discs.
Know y our product Before using the polisher , familiarise yourself with all the operating features and safety requirements. Use the tool and accessories only for the applications intended. All other applications are expressly ruled out. 1. Motor housing 2.
Setting up Multi position front handle Screw the multi position front handle (9) into the most suitable mounting point (6) (left side , right side or at the top) to suit the task on hand. V ariable Speed The POL1450 is fitted with a variable speed dial (3) that allows you to adjust the speed to suit the application and material.
9. T o tighten, press and hold the spindle lock button (2) and using the pin wrench tighten the outer flange . 10. Turn the new disc by hand, ensuring that it is tight in the flanges and that it rotates fully and does not wobble unduly. 11. Run the angle grinder at no load for at least one minute to ensure the new disc is in good condition.
11 Operation in sander mode Fitting the Sandpaper Switch off the tool and disconnect it from the power supply. 1. The GMC grinder/sander/polisher is fitted with a hook & loop base allowing easy changing of accessories . Ensure there are no debris left in the hooks & loops o f the disc before fitting accessories.
12 Operation in polisher mode Prepar e the surface For best results, the surf ace should be clean and dry. Most high-gloss surfaces can be cleaned with a mild soap and water solution. For removal of stubborn dirt stains such as road tar , grease, and bug stains , you can use a mild ammonia solution such as that used in glass cleaners.
sponge , polishing bonnet and the tool are in good condition. Plug the cordset into the mains socket. 3. Do not overload the tool so that the disc slows down. Let the tool do the work rather than applying pressure . The weight of the tool alone provides sufficient pressure .
14.
15.
Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New.
An important point after buying a device Global Machinery Company POL1450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Global Machinery Company POL1450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Global Machinery Company POL1450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Global Machinery Company POL1450 you will learn all the available features of the product, as well as information on its operation. The information that you get Global Machinery Company POL1450 will certainly help you make a decision on the purchase.
If you already are a holder of Global Machinery Company POL1450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Global Machinery Company POL1450.
However, one of the most important roles played by the user manual is to help in solving problems with Global Machinery Company POL1450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Global Machinery Company POL1450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
