Instruction/ maintenance manual of the product 600CM Gilson
Go to page of 15
GILS J J N MIXERS CONCRETE MIXER MODEL 600CM OPERATING INSTRUCTIONS & PARTS LIST GILS J J N MIXERS BY 4343 Easton Road · St. Joseph, MO 64503 816-233-4840 · 800-253-3676 Fax 816-233-4624 · 888-253-3676 E-Mail: cleform@ccp.com Web Address: www.cleform.
1 TO THE OWNER: This owner’s manual provides the information needed to operate and maintain this Gilson mixer. Carefully read and follow all safety and operating instructions in this manual. Also, be sure every operator of this mixer reads this manual before operating the mixer.
2 Table of Contents 1. Warranty Information 3 2. Safety Instructions, Pre-operational Checks 4-5 3. Lubrication 5-6 4. Care of Mixer 6 5. Batch/Mix Instructions 6 6. Parts Explosions and Lists 7 For parts and service information,contact either your local dealer or the Cleform Tool Corp.
3 WARRANTY: This mixer is warranted to the original purchaser only, to be free of defects in material and workmanship under normal use, for one year from purchase date. Cleform Tool Corp. shall without charge, repair or replace parts which are found to be defective.
4 SAFETY INSTRUCTIONS SAFETY PRECAUTIONS: This is the industry’s safety alert symbol. This symbol calls attention to items or operations that could be dangerous. This symbol can be found throughout this manual and on safety decals on the mixer. Read these messages carefully.
5 TOWING & SAFETY CHAINS: For transporting the mixer, slide the tow pole out as far as possible and insert the locking pin. When operating the mixer, slide the tow pole in and lock it in place. Make sure drum is locked in position and engine housing is closed and secured.
6 Drum Tilt Brake Bearing: The brake bearing casting is located near the front of the mixer and should be greased weekly. Handwheel Bearing: The handwheel hub bearing is located on the front of the mixer, behind the handwheel. This bearing should be greased weekly.
7.
8.
9.
10.
11.
12.
13.
14.
An important point after buying a device Gilson 600CM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gilson 600CM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gilson 600CM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gilson 600CM you will learn all the available features of the product, as well as information on its operation. The information that you get Gilson 600CM will certainly help you make a decision on the purchase.
If you already are a holder of Gilson 600CM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gilson 600CM.
However, one of the most important roles played by the user manual is to help in solving problems with Gilson 600CM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gilson 600CM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
