Instruction/ maintenance manual of the product GV-R545-1GI (rev. 2.0) Gigabyte
Go to page of 130
AMD Graphics Accelerator User's Manual Rev. 101 Copyright © 2012 GIGABYTE TECHNOLOGY CO., L TD Copyright by GIGA-BYTE TECHNOLOGY CO., L TD. ("GBT") . No part of this manual may be reproduced or transmitted in any form without the expressed, written permission of GBT .
- 2 - T able of Contents 1. Introduction ................................................................................................................ 3 1.1. Minimum System Requirements ..............................................................
- 3 - Introduction 1. Introduction 1.1. Minimum System Requirements • Hardware - Intel ® Pentium ® 4 / Core TM 2 or AMD Athlon TM / Phenom TM - 1 GB or more of system memory for best performance -.
- 4 - AMD Series Graphics Accelerator 2.1. Hardware Installation Step 1. Locate the PCI Express x16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x16 slot, and press it in firmly until the card is fully seated.
- 5 - Hardware Installation 2.1.1. How to enable the AMD CrossFireX TM technology? • CrossFireX TM Configuration If you are planning on using this graphics card as part of a CrossFireX system, the f.
- 6 - AMD Series Graphics Accelerator Expansion cards contain very delicate Integrated Circuit (IC) chips. T o protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Turn off your computer and unplug power supply.
- 7 - Software Installation 3. Software Installation Notice the following guidelines before installing the drivers: 1 . First make sure your system has installed DirectX 9 or later version. 2 . Make sure your system has installed the appropriate motherboard drivers (for the motherboard drivers, please contact the motherboard manufacturer.
- 8 - AMD Series Graphics Accelerator Setp 4: Click the Express or Custom icon and then click Next . Step 5: Click the Accept button. The system is installing the components. Step 6: Click the Finish button to restart the computer. Then the driver installation is completed.
- 9 - Software Installation 3.1.2. GIGABYTE Easy Boost on Driver Disk Step 1: Click the GIGABYTE Easy Boost item. Step 2: Choose the language for the installation and click the OK button. Step 3: Choose the Typical and click the Next button Step 4: Click the Finish button.
- 10 - AMD Series Graphics Accelerator GIGABYTE Easy Boost Easy Boost is a graphics card smart tuning tool, combined with Overclock, OSD Turning, BIOS Setting, T echnical Support, Live Update function. Over Clock: User can adjust GPU clock, Memory clock, Shader clock and Fan speed here.
- 1 1 - Software Installation Incorrectly doing overclock may result in damage to your system and reduce the useful life of the system components. BIOS Setting: User can back up current BIOS, flash BIOS from selected file and auto flash BIOS on-line. T echnical Support: User can get information of VGA, CPU, motherboard, system memory and monitor.
- 12 - AMD Series Graphics Accelerator 3.2. T askbar Icon After installation of the display driver, you will find an AMD icon in the notification area. Right-click the icon to enter the AMD Catalyst Control Center . The AMD Catalyst Control Center is used to configure all your graphics card settings.
- 1 3 - Software Installation Configuring Audio Output Configure the default audio output device based upon your needs. Step 1: Go to Start > Control Panel > Hardware and Sound > Manage audio devices.
- 14 - AMD Series Graphics Accelerator Y ou can move the slider to change the resolution. Y ou can click the item to change the color quality . Click the Advanced button for advanced settings.
- 1 5 - Software Installation AMD Catalyst ® Control Center Basic View : The Basic View is the default view when AMD Catalyst Control Center is launched for the first time. This interface provides access to the basic settings and advanced features of your AMD graphics products.
- 16 - AMD Series Graphics Accelerator Step 4: In the Output Video Format list, select a file format for the new file. If you wish to change the name of the new file, enter the new name in the Output File area. Finally, click Next to start file conversion.
- 1 7 - Software Installation Quick Settings: The Quick Settings page provides access to three main settings. 3D Quality 3D Performance and Quality Settings allows your 3D games and applications to get faster perfor- mance and better quality with a more balanced setting.
- 18 - AMD Series Graphics Accelerator AMD Catalyst Control Center Advanced View The Advanced page allows you to configure all of the many available settings of your AMD graphics card. View Properties: The CA T AL YST Control Center dashboard supports three types of views: Basic View/ Advanced View/ Custom View.
- 1 9 - Software Installation Profiles Properties: Y ou can use profiles to create customized environments for your desktop, video, and 3D applications. Define and save your own personal video settings that can be quickly activated manually, through a Hotkey, or by file association.
- 20 - AMD Series Graphics Accelerator Help Properties: The Catalyst Control Center Help feature allows you to access the comprehensive online help, register your product, or generate a problem report should you require technical support.
- 2 1 - Software Installation Displays Manager: Displays Manager is the central location for configuring your display devices and arranging your desktop. Use Displays Manager to change your display setup and arrange your desktop in a multi- monitor environment.
- 22 - AMD Series Graphics Accelerator Monitor Properties 1: Attributes Monitor Attributes provides information about the attached monitor . Y ou can also enable Extended Display Identification Data (EDID). EDID uses the information provided by the attached monitor to determine the limits for the resolution and re- fresh rate.
- 2 3 - Software Installation 3D: Standard Settings The Standard Settings page provides access to a universal slider control where you can simulta- neously adjust all of the standard 3D settings for any type of 3D application.
- 24 - AMD Series Graphics Accelerator Anisotropic Filtering Anisotropic Filtering is a technique that preserves detail on surfaces that have three-dimensional per- spective and fade away into the background. It works best when used in conjunction with Mipmapping.
- 2 5 - Software Installation Avivo TM Video: Presets T o quickly adjust your video settings choose one of the video presets. Note: These settings will only affect applications with video overlay support. Basic Color Use the Avivo Color: Basic option to manually set Gamma, Brightness, Contrast, Saturation, and Tint for video playback.
- 26 - AMD Series Graphics Accelerator All Settings The All Settings page combines all of the princi- pal Video features onto a single page, without any preview window, allowing quick access and adjustment. This page is useful when it is not necessary to preview the adjusted settings because the effect is already known or understood.
- 2 7 - Software Installation AMD Overdrive: Use Overdrive to maximize your viewing experience by dynamically and safely overclocking the graphics processor and memory. Use the Automated clock configuration utility to obtain the AMD recom- mended speeds for the graphics processor clock and video memory clock.
- 28 - AMD Series Graphics Accelerator AMD Eyefinity setting: Select Create Eyefinity Display Group Select Display (3 x 1) Arrange the order of your displays then the setting is completed.
- 2 9 - Troubleshooting Tips 4. T roubleshooting Tips The following troubleshooting tips may help if you experience problems. Contact your dealer or GIGABYTE for more advanced troubleshooting information. Check that the card is seated properly in the PCI Express x16 slot.
- 30 - AMD Series Graphics Accelerator 5.1. Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose.
- 31 - Appendix Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly.
- 32 - AMD Series Graphics Accelerator.
.
34 4.9 Account s and sy nchronizati on: Allows you t o manage t he accounts of di f f erent m ail applicatio ns , Skype etc ., W hich can be sync hro nized in rea l time or not.
Genie Advanced Home 35 Dual Band 1 1ac WiFi Router R6200 3. If you selected Y es, click Next . The following screen displays: The Setup Wizard searches your Internet connection for servers and protocols to determine your ISP configuration.
Genie Advanced Home 36 Dual Band 1 1ac WiFi Router R6200 2. Click Next . The following screen lets you select the method for adding the WPS client (a wireless device or computer). Y ou can use either the push button or PIN method. 3. Select either Push Button or PIN Number .
37 4.15 Accessibil ity : Differ ent options to faci litate the acce ssi bili ty of the T ablet 4.16 Dev elopment o ptio ns : Options for developers..
Genie Advanced Home 38 Dual Band 1 1ac WiFi Router R6200 • Disable Port Scan and DoS Protection . DoS protection protects your LAN against denial of service attacks such as Syn flood, Smurf Attack, Ping of Death, T eardrop Attack, UDP Flood, ARP Attack, Spoofing ICMP , Null Scan, and many others.
39 Device can ’t to open 1) Check the bat tery pow er 2) Connect ad aptor first , then chec k again 3) After charg ing then can’ t to open, Pl ea se cont ac t with the supp l ier After start up th.
.
41 DECLARA TION O F CONFORMITY Brand : LEOT EC Supplier n ame: Wor ld Driver S.A. Address: C t ra de l'H ospitalet 66 - 68 08940 - Corn ellà de Llobre g at – Barcel ona Te l : +34 93 267 66 04 NIF: A 62589 130 Web: www .
42 IT ALIANO Gentile Cli ente, grazie per av er scelto questo prodot to LEOTE C. Ci auguriamo c he sia di suo tot ale gusto e che possa godern e a lungo.
Genie Advanced Home 43 Dual Band 1 1ac WiFi Router R6200 • Secondary DNS server (if you entered a secondary DNS address in the Internet Setup screen) T o use another device on your network as the DHCP server , or to specify the network settings of all of your computers, clear the Use Router as DHCP Server check box and click Apply .
44 1. A spetto e pulsant i: 1.1 Schermo T attille Scher mo tattile ca pac itivo mult ipunto da 10,1": per operar e, cliccar e, trascinar e nello schermo t attile.
45 1. 6 Auricola re Connessi one auric olare st andard da 3 ,5 mm. 1. 7 HDM I Connessi one di uscit a HDMI. 1. 8 Lett ore card TF / Micr oSD. Espa nsione della memo ria tramite interfacc ia di scheda t ipo TF / MicroS D.
Genie Advanced Home 46 Dual Band 1 1ac WiFi Router R6200 a. If you add an entry , the Priority Rules screen expands as shown: b. In the QoS Policy for field, enter a descriptive name for the new application or game. c. In the Connection T ype list, select either TCP , UDP , or both ( TCP/UDP ).
47 L ’ angol o superior e sinistro : permette di es eguire una ri ce rca in Google d i git ando c iò che si desidera t rovare opp ure facendo u na ricerca per v oce (in entra m bi i casi si deve ess ere coll egati a Inter net). L ’ ango lo superior e destro consente di accedere alle applicaz i oni ed a i Widget s inst al lati.
48 Elimina zione di icon e: tenere un 'i cona 3 second i, trascinar la fino al l’icona d el cestino, una volt a che divent a di colore rosso, rilasciare la pre ssione per rimuovere l' icona.
49 4. Im post azioni di base Impost azioni: cliccare sul l'icona Im post azioni per accedere all'inter faccia di Configur azione. 4.1 Wi - Fi: consente di at tivare la conness ione Wi - Fi e collegarsi a qualsiasi r ete W i - Fi che sia all'intern o dell'area di copert ura.
50 4.3 Altro..: abilita la mod alità Aereo (usat o quand o si è a bordo di un aereo) e impostaz i o ni avanz ate sia per reti Eth ernet che l a creazion e di VPN e reti mobili.
USB Storage 51 Dual Band 1 1ac WiFi Router R6200 • Sharing multimedia with friends and family such as MP3 files, pictures, and other multimedia with local and remote users. • Sharing resources on your network. Y ou can store files in a central location so that you do not have to power up a computer to perform local sharing.
52 4.7 Batteria : Cons ente di v isualizzar e l'utilizzo cor rente della b atteria. 4.8 Applicazio ni: mostr a l e app licazion i scaricat e nella me m oria pr incipa le o in qu ella d’espa nsion e (scheda S D), così come le applicaz ioni in esec uzione.
USB Storage 53 Dual Band 1 1ac WiFi Router R6200 T o access your USB device: 1. Click the network device name or the share name in your computer ’s network folders list. 2. For smb://readyshare, click Connect . Note: If you logged in to the router before you connected your USB device, you might not see your USB device in the router screens.
USB Storage 54 Dual Band 1 1ac WiFi Router R6200 3. Y ou can use this screen to select a folder , change the share name, or change the read access or write access from All – no password to admin . The user name (account name) for All – no password is guest.
USB Storage 55 Dual Band 1 1ac WiFi Router R6200 FTP . Disabled by default. FTP (via Internet) . Disabled by default. If you enable this setting, remote users can access the USB drive through FTP over the Internet. This setting supports both downloading and uploading of files.
USB Storage 56 Dual Band 1 1ac WiFi Router R6200 2. Click the Safely Remove USB Device button. This takes the drive offline. Media Server Settings By default, the router is set up to act as a Ready DLNA Media server .
USB Storage 57 Dual Band 1 1ac WiFi Router R6200 Specify Approved USB Devices For more security , you can set up the router to share approved USB devices only . T o set up approved USB devices: 1. Select Advanced > Advanced Setup > USB Settings.
USB Storage 58 Dual Band 1 1ac WiFi Router R6200 Connect to the USB Drive from a Remote Computer T o connect to the USB drive from remote computers with a web browser , use the router’s Internet port IP address. If you are using Dynamic DNS, you can type the DNS name, rather than the IP address.
59 6. Specifiche Scher mo tattile capa citivo 10, 1 ” ad alta de finizione mu lti - touc h Risoluz ione 1024 x 600 Rockchip 30 66 Cortex A 9 Dual core, 1.
ReadySHARE Printer 60 Dual Band 1 1ac WiFi Router R6200 ReadySHARE Printer Y ou can connect a USB printer to the router ’ USB port, and share it among Windows and Mac computers on the network. T o set up ReadySHARE Printer: 1. Connect the USB printer to the router USB port with a USB printer cable.
ReadySHARE Printer 61 Dual Band 1 1ac WiFi Router R6200 4. Follow the instructions to install the NETGEAR USB Control Center utility . 5. After you have installed the utility , select the language.
62 FRANÇAIS Cher client. Nous vous remercions d'a voir chois i ce produit LEO TEC. Nous espéron s qu'il vous donne u ne tot ale satisfa ction et q ue vous puiss iez en prof iter tr ès longte mps.
63 interdite ( c'est le cas de s avions). - N'utilisez p as l'app areil pendant que v ous conduisez ou vous marchez. - Le connecteur USB doit êtr e utilisé unique ment pour la transmis sion de donn ées. Le constructe ur se réser ve le droit de modi fier le produit, de changer les spécificat ions et le design.
64 1. A spect et bouton s: 1.1 Ecran tacti le Ecran ta ctile capac itif de 10,1” multipoint : pour opére r , appuyer ou faire glisser le doigt sur l'écran tact ile. 1.2 A l lumer/ éteindre Al lu me r : Maintenez appuyé le bouton d'al lumage jusqu'à ce que s'aff iche l'écran d'accuei l.
65 Une press ion longue d iminue le v ol ume a udio . 1. 4 Bouton V+ Une pressio n longue aug mente le volume audio 1.5 Bouton Retou r Revie nt à l'écran précé dent 1. 6 Ecouteur : Connexion d'écoute ur st andard de 3.5 mm 1. 7 HDM I C onnex ion de sortie HDMI .
66 ci-dessous. En mod e télécharg ement on peut copier et effa cer des f ichiers dans l 'app areil et s ur la carte de mémoire S D. 3. Ecrans opér ationn els 3.1 Ecran d'accueil Aprè s le démarrage v ous entrerez sur l'écran d'accuei l.
67 recherche da ns Google en écrivant l'objet de la rec herche, so it ef fectuer une recherche vocale (dans tous les cas l'ap par eil doit être co nnecté à I nternet). Le coin supér ieur droit permet l'acc ès aux applications et aux W id gets i nsta llés.
Security 68 Dual Band 1 1ac WiFi Router R6200 Keyword Blocking of HTTP T raffic Use keyword blocking to prevent certain types of HTTP traffic from accessing your network. The blocking can be always or according to a schedule. T o set up keyword blocking: 1.
Security 69 Dual Band 1 1ac WiFi Router R6200 Block Services (Port Filtering) Services are functions that server computers perform at the request of client computers. For example, web servers serve web pages, time servers serve time and date information, and game hosts serve data about other players’ moves.
70 4.3 Plus : Habilite le mod e Avion (à utiliser lorsqu' on est à bord d'un avion) et permet de faire des réglages av ancés au ssi bien pour l es réseaux Ethernet , que pour la créat ion de VPN ou de réseaux mob i les.
71 4.5 A ffichage: Réglage des par amètres, ch anger les fonds d'é cran, ch anger le format de la police, etc. 4.6 Stock age : Affich e le niveau d' utilisatio n de la mémoir e des diver s moyens de stoc kage.
Security 72 Dual Band 1 1ac WiFi Router R6200 Security Event Email Notifications T o receive logs and alerts by email, provide your email information in the Email screen, and specify which alerts you want to receive and how often. T o set up email notifications: 1.
73 Le constr ucteur ne se re sponsabi lisera pas des dom mages pr oduits à l'app areil par un quelconque l ogic iel malv eillant, ou un v i rus que l qu'i l soit qui a it été causé par le téléc harge ment, l'installat ion ou l'exéc ution d'un logiciel.
Administration 74 Dual Band 1 1ac WiFi Router R6200 Upgrade the Router Firmware The router firmware (routing software) is stored in flash memory . Y ou can update the firmware from the Administration menu on the Advanced tab. Y ou might see a message at the top of the Genie screens when new firmware is available for your product.
Administration 75 Dual Band 1 1ac WiFi Router R6200 V iew Router Status T o view router status and usage information: Select Advanced Home or select Administration > Router Status to display the following screen: Router Information Hardware V ersion.
Administration 76 Dual Band 1 1ac WiFi Router R6200 Connection . This shows if the router is using a fixed IP address on the W AN. If the value is DHCP Client, the router obtains an IP address dynamically from the ISP . IP Subnet Mask . The IP subnet mask that the Internet (W AN) port of the router uses.
77 4.14 Régla ge de la date et de l'he ure Pour défin ir la date et l'he ure, le fusea u horaire et choisir le format de l'h eure et de la date 4.15 A cessibilité : Différe ntes opti ons pour rendre l 'acces sibilité à la T ablette plus a isée.
78 4.16 Option s pour les d ével oppeurs : Opt ions pou r les développ eurs. 4.17 A p ropo s de la T ablette : Af fiche des infor mations sur la T ablette et le sy stème opératif.
Administration 79 Dual Band 1 1ac WiFi Router R6200 V iew Logs of W eb Access or Attempted W eb Access The log is a detailed record of the websites you have accessed or attempted to access. Up to 256 entries are stored in the log. Log entries appear only when keyword blocking is enabled and no log entries are made for the trusted user .
Administration 80 Dual Band 1 1ac WiFi Router R6200 Manage the Configuration File The configuration settings of the R6200 WiFi Router are stored within the router in a configuration file. Y ou can back up (save) this file to your computer , restore it, or reset it to the factory default settings.
81 DEC LAR A TION DE CO NFORMI TE DE MA RQUE Marque: L EOTEC Nom du four nisseur: Wor ld Driver S. A. Adresse: C t ra de l'Hos pita let 66 - 68 08940 - Cornellà de L lobregat – Bar celo na Te l : +34 93 2 67 66 04 NIF: A 62589130 Web: w ww .leotec.
Administration 82 Dual Band 1 1ac WiFi Router R6200 recovery process is supported in Internet Explorer , Firefox, and Chrome browsers, but not in the Safari browser . T o set up password recovery: 1. Select the Enable Password Recovery check box. 2.
83 9 9. Advanced Settings This chapter describes the advanced features of your router. The information is for readers with advanced networking knowledge who want to set the router up for unique situations such as when remote access from the Internet by IP or domain name is needed.
Advanced Settings 84 Dual Band 1 1ac WiFi Router R6200 Advanced Wireless Settings T o go to the Advanced W ireless Settings screen: Select Advanced > Advanced Setup > W ireless Settings : Scroll to view more settings The following settings are available in this screen: Enable Wireless Router Radio .
Advanced Settings 85 Dual Band 1 1ac WiFi Router R6200 Wireless Card Access List. Click the Set Up Access List button display the Wireless Card Access List screen. Y ou can restrict access to your network to specific devices based on their MAC address.
Advanced Settings 86 Dual Band 1 1ac WiFi Router R6200 T o set up the R6200 WiFi Router in Bridge mode: 1. Make sure that the first router (the one cabled to the modem) has an Internet connection and that wireless devices can connect to it.
Advanced Settings 87 Dual Band 1 1ac WiFi Router R6200 b. T ype the wireless network name (SSID) of the router you are connecting to. c. Select the security option for the router you are connecting to. d. T ype the passphrase of the router you are connecting to.
Advanced Settings 88 Dual Band 1 1ac WiFi Router R6200 4. Click Add to add this wireless device to the Wireless Card Access List. The screen changes back to the list screen. 5. Add each computer or device you want to allow to connect wirelessly . 6. Select the T urn Access Control On check box.
Advanced Settings 89 Dual Band 1 1ac WiFi Router R6200 Wireless Base Station . The router acts as the parent access point that bridges traffic to and from the child repeater access point. The base station also handles wireless and wired local computers.
Advanced Settings 90 Dual Band 1 1ac WiFi Router R6200 • Wireless MAC of this router . This field displays the MAC address for your router for your reference. Y ou will need to enter this MAC address in the corresponding Wireless Repeating Function screen of the other access point you are using.
Advanced Settings 91 Dual Band 1 1ac WiFi Router R6200 2. Select Advanced > Advanced Setup > Wireless Repeating Function to display the Wireless Repeating Function screen. Scroll to view more settings 3. In the Wireless Repeating Function screen, select the Enable Wireless Repeating Function check box.
Advanced Settings 92 Dual Band 1 1ac WiFi Router R6200 5. Fill in the Repeater IP Address field. This IP address has to be in the same subnet as the base station, but different from the LAN IP address of the base station. 6. Click Apply to save your changes.
Advanced Settings 93 Dual Band 1 1ac WiFi Router R6200 the web page request message to www .example.com, your router stores the original information and then modifies the source information in the request message, performing Network Address T ranslation (NA T): • The source address is replaced with your router’ s public IP address.
Advanced Settings 94 Dual Band 1 1ac WiFi Router R6200 An example is Internet Relay Chat (IRC). Y our computer connects to an IRC server at destination port 6667. The IRC server not only responds to your originating source port, but also sends an “identify” message to your computer on port 1 13.
Advanced Settings 95 Dual Band 1 1ac WiFi Router R6200 Internet to initiate a connection to a server computer on your network. Normally , your router ignores any inbound traffic that is not a response to your own outbound traf fic. Y ou can configure exceptions to this default rule by using the port forwarding feature.
Advanced Settings 96 Dual Band 1 1ac WiFi Router R6200 • Port triggering does require that you know the computer ’s IP address in advance. The IP address is captured automatically . • Port forwarding requires that you specify the computer ’s IP address during configuration, and the IP address can never change.
Advanced Settings 97 Dual Band 1 1ac WiFi Router R6200 1. Select Advanced Setup > Port Forwarding/Port T riggering to display the following screen: Port Forwarding is selected as the service type. 2. From the Service Name list, select the service or game that you will host on your network.
Advanced Settings 98 Dual Band 1 1ac WiFi Router R6200 3. Click the Add Custom Service button to display the following screen: 4. In the Service Name field, enter a descriptive name. 5. In the Protoco l list, select the protocol. If you are unsure, select TCP/UDP .
Advanced Settings 99 Dual Band 1 1ac WiFi Router R6200 T o make a local web server public: 1. Assign your web server either a fixed IP address or a dynamic IP address using DHCP address reservation. In this example, your router always gives your web server an IP address of 192.
Advanced Settings 100 Dual Band 1 1ac WiFi Router R6200 2. Select the Port T riggering radio button to display the port triggering information. 3. Clear the Disable Port T riggering check box if it is selected. Note: If the Disable Port Triggering check box is selected after you configure port triggering, port triggering is disabled.
Advanced Settings 101 Dual Band 1 1ac WiFi Router R6200 6. Click Add Service to display the following screen: FPO 7. In the Service Name field, type a descriptive service name. 8. In the Service User list, select Any (the default) to allow this service to be used by any computer on the Internet.
Advanced Settings 102 Dual Band 1 1ac WiFi Router R6200 host name that you configure in the router. Then, whenever your ISP-assigned IP address changes, your router automatically contacts the Dynamic DNS service provider , logs in to your account, and registers your new IP address.
Advanced Settings 103 Dual Band 1 1ac WiFi Router R6200 Static Routes Static routes provide additional routing information to your router. T ypically , you do not need to add static routes. Y ou have to configure static routes only for unusual cases such as multiple routers or multiple IP subnets on your network.
Advanced Settings 104 Dual Band 1 1ac WiFi Router R6200 2. Click Add to display the following screen: 3. In the Route Name field, type a name for this static route (for identification purposes only .) 4. Select the Private check box if you want to limit access to the LAN only .
Advanced Settings 105 Dual Band 1 1ac WiFi Router R6200 Remote Management The remote management feature lets you upgrade or check the status of your R6200 WiFi Router over the Internet. T o set up remote management: 1. Select Advanced > Advanced Setup > Remote Management .
Advanced Settings 106 Dual Band 1 1ac WiFi Router R6200 a number from 1024 to 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP .
Advanced Settings 107 Dual Band 1 1ac WiFi Router R6200 not allow any device to automatically control the resources, such as port forwarding (mapping) of the router. Advertisement Period . The advertisement period is how often the router broadcasts its UPnP information.
Advanced Settings 108 Dual Band 1 1ac WiFi Router R6200 2. Select the IPv6 connection type from the list. Y our Internet service provider (ISP) can provide this information. • If your ISP did not provide details, you can select IPv6 T unnel . • If you are not sure, select Auto Detect so that the router detects the IPv6 type that is in use.
Advanced Settings 109 Dual Band 1 1ac WiFi Router R6200 5. Set the T raffic Counter to begin at a specific time and date. 6. Set up T raffic Control to issue a warning message before the monthly limit of Mbytes or hours is reached.
11 0 10 10. T roubleshooting This chapter provides information to help you diagnose and solve problems you might have with your router. If you do not find the solution here, check the NETGEAR support site at http://support.netgear .com for product and contact information.
T roubleshooting 111 Dual Band 1 1ac WiFi Router R6200 Quick T ips s section describes tips for troubleshooting some common problems. Sequence to Restart Y our Network When you need to restart your network, follow this sequence: 1. T urn off and unplug the modem.
T roubleshooting 11 2 Dual Band 1 1ac WiFi Router R6200 T roubleshooting with the LEDs After you turn on power to the router, the following sequence of events should occur: 1.
T roubleshooting 11 3 Dual Band 1 1ac WiFi Router R6200 LEDs Never T urn Off When the router is turned on, the LEDs turn on for about 10 seconds and then turn off. If all the LEDs stay on, there is a fault within the router. If all LEDs are still on 1 minute after power-up: • Cycle the power to see if the router recovers.
T roubleshooting 11 4 Dual Band 1 1ac WiFi Router R6200 Cannot Log In to the Router If you are unable to log in to the router from a computer on your local network, check the following: • If you are using an Ethernet-connected computer , check the Ethernet connection between the computer and the router as described in the previous section.
T roubleshooting 11 5 Dual Band 1 1ac WiFi Router R6200 4. Check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router has not obtained an IP address from your ISP .
T roubleshooting 11 6 Dual Band 1 1ac WiFi Router R6200 T roubleshooting PPPoE If you are using PPPoE, try troubleshooting your Internet connection. T o troubleshoot a PPPoE connection: 1. Log in to the router. 2. Select Administration > Router Status .
T roubleshooting 11 7 Dual Band 1 1ac WiFi Router R6200 Changes Not Saved If the router does not save the changes you make in the router interface, check the following: • When entering configuration settings, always click the Apply button before moving to another screen or tab, or your changes are lost.
T roubleshooting 11 8 Dual Band 1 1ac WiFi Router R6200 • Use the Reset button on the back of the router. See Factory Settings on page 120 . If you restore the factory settings and the router fails to restart, or the green Power/T est LED continues to blink, the unit might be defective.
T roubleshooting 11 9 Dual Band 1 1ac WiFi Router R6200 V erify that the IP address for your router and your computer are correct and that the addresses are on the same subnet. T est the Path from Y our Computer to a Remote Device After verifying that the LAN path works correctly , test the path from your computer to a remote device.
120 A A. Supplemental Information This appendix provides factory default settings and technical specifications for the Dual Band 1 1ac WiFi Router R6200.
Supplemental Information 121 Dual Band 1 1ac WiFi Router R6200 Local network (LAN) continued DHCP starting IP address 192.168.1.2 DHCP ending IP address 192.
Supplemental Information 122 Dual Band 1 1ac WiFi Router R6200 T echnical Specifications T able 5. R6200 Router specifications Feature Description Data and routing protocols TCP/IP , RIP-1, RIP-2, DHC.
Supplemental Information 123 Dual Band 1 1ac WiFi Router R6200 Operating frequency range 2.4 GHz 2.412–2.462 GHz (US) 2.412–2.472 GHz (Japan) 2.412–2.472 GHz (Europe ETSI) 5 GHz 5.18–5.24 + 5.745–5.825 GHz (US) 5.18–5.24 GHz (Europe ETSI) FCC: 5.
124 B B. Notification of Compliance NETGEAR Dual Band - Wireless Regulatory Compliance Information This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio devices.
Notification of Compliance 125 Dual Band 1 1ac WiFi Router R6200 FCC Radio Frequency Interference W arnings & Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Notification of Compliance 126 Dual Band 1 1ac WiFi Router R6200 Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
127 Index A access remote 105 viewing logs 79 access control turning on 88 access points 88 accessing remote computer 92 adding custom service 97 priority rules 45 address reservation 43 advertisement.
128 Dual Band 1 1ac WiFi Router R6200 F factory default settings, restoring 81 , 117 factory settings list of 120 resetting 12 file sharing 50 firmware version 75 firmware, upgrading 16 , 74 fragmenta.
129 Dual Band 1 1ac WiFi Router R6200 P packets, fragmented 39 Parental Controls 25 passphrases changing 30 product label 12 password recovery , admin 81 password, restoring 117 photos, sharing 51 pol.
130 Dual Band 1 1ac WiFi Router R6200 USB devices, approved 57 user-defined services 69 V viewing logs 79 W W AN IP address, troubleshooting 114 W AN setup 37 Wi-Fi Protected Setup (WPS) 18 , 36 devic.
An important point after buying a device Gigabyte GV-R545-1GI (rev. 2.0) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gigabyte GV-R545-1GI (rev. 2.0) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gigabyte GV-R545-1GI (rev. 2.0) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gigabyte GV-R545-1GI (rev. 2.0) you will learn all the available features of the product, as well as information on its operation. The information that you get Gigabyte GV-R545-1GI (rev. 2.0) will certainly help you make a decision on the purchase.
If you already are a holder of Gigabyte GV-R545-1GI (rev. 2.0), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gigabyte GV-R545-1GI (rev. 2.0).
However, one of the most important roles played by the user manual is to help in solving problems with Gigabyte GV-R545-1GI (rev. 2.0). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gigabyte GV-R545-1GI (rev. 2.0) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center