Instruction/ maintenance manual of the product GV-R477UD-1GI Gigabyte
Go to page of 32
GV -R477UD-1GI A TI Radeon TM HD 4770 Graphics Accelerator User's Manual Rev. 101 12MM-R477OGI-101R Copyright © 2009 GIGABYTE TECHNOLOGY CO., L TD Copyright by GIGA-BYTE TECHNOLOGY CO., L TD. ("GBT") . No part of this manual may be reproduced or transmitted in any form without the expressed, written permission of GBT .
Sep. 03, 2009 VGA Card GV-R477UD-1GI V GA Card G V -R477UD-1GI Sep. 03, 2009.
- 3 - T able of Contents 1. Introduction ................................................................................................................ 4 1.1. Features .................................................................................
- 4 - GV-R477 Series Graphics Accelerator 1. Introduction 1.1. Features • Powered by A TI Radeon TM HD 4770 Graphics Processing Unit (GPU) • Supports PCI Express 2.
- 5 - Hardware Installation 2. Hardware Installation 2.1. Board Layout CrossFire Connector D-Sub Monitor Connector (15-pin) HDMI Connector DVI-I Connector D-Sub Moni- tor Connec- tor (15-pin) DVI-I Co.
- 6 - GV-R477 Series Graphics Accelerator Expansion cards contain very delicate Integrated Circuit (IC) chips. T o protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Turn off your computer and unplug power supply.
- 7 - Hardware Installation 2.2. Hardware Installation Now that you have prepared your computer, you are ready to install your graphics card. Step 1. Locate the PCI Express x16 slot.
- 8 - GV-R477 Series Graphics Accelerator How to enable the A TI CrossFireX TM technology? Step 1: Install two CrossFireX graphics cards of the same chipset on a CrossFireX-supported motherboard and connect the graphics cards via two CrossFire bridge interconnect cables (Figure 1).
- 9 - Software Installation 3. Software Installation Notice the following guidelines before installing the drivers: 1 . First make sure your system has installed DirectX 9 or later version. 2 . Make sure your system has installed the appropriate motherboard drivers (for the motherboard drivers, please contact the motherboard manufacturer.
- 10 - GV-R477 Series Graphics Accelerator Setp 4: Click the Express or Custom icon and then click Next . Step 5: Click the Accept button. The system is installing the components. Step 6: Click the Finish button to restart the computer. Then the driver installation is completed.
- 1 1 - Software Installation 3.2. T askbar Icon After installation of the display driver , you will find an A TI icon in the notification area. Right-click the icon to enter the A TI Catalyst Control Center . The A TI Catalyst Control Center is used to configure all your graphics card settings.
- 12 - GV-R477 Series Graphics Accelerator Configuring Audio Output Configure the default audio output device based upon your needs. Step 1: Go to Start > Control Panel > Hardware and Sound > Manage audio devices.
- 1 3 - Software Installation Y ou can move the slider to change the resolution. Y ou can click the item to change the color quality . Click the Advanced button for advanced settings.
- 14 - GV-R477 Series Graphics Accelerator A TI Catalyst ® Control Center Basic View : The Basic View is the default view when A TI Catalyst Control Center is launched for the first time. This interface provides access to the basic settings and advanced features of your A TI graphics products.
- 1 5 - Software Installation Step 4: In the Output Video Format list, select a file format for the new file. If you wish to change the name of the new file, enter the new name in the Output File area. Finally, click Next to start file conversion. The video file has been successfully converted.
- 16 - GV-R477 Series Graphics Accelerator Quick Settings: The Quick Settings page provides access to three main settings. 3D Quality 3D Performance and Quality Settings allows your 3D games and applications to get faster perfor- mance and better quality with a more balanced setting.
- 1 7 - Software Installation A TI Catalyst Control Center Advanced View The Advanced page allows you to configure all of the many available settings of your ATI graphics card. View Properties: The CA T AL YST Control Center dashboard supports three types of views: Basic View/ Advanced View/ Custom View.
- 18 - GV-R477 Series Graphics Accelerator Profiles Properties: Y ou can use profiles to create customized environments for your desktop, video, and 3D applications. Define and save your own personal video settings that can be quickly activated manually, through a Hotkey, or by file association.
- 1 9 - Software Installation Help Properties: The Catalyst Control Center Help feature allows you to access the comprehensive online help, register your product, or generate a problem report should you require technical support. The Catalyst Control Center Help feature offers the following options: Help for this Page Help Contents .
- 20 - GV-R477 Series Graphics Accelerator Displays Manager: Displays Manager is the central location for configuring your display devices and arranging your desktop. Use Displays Manager to change your display setup and arrange your desktop in a multi- monitor environment.
- 2 1 - Software Installation Monitor Properties 1: Attributes Monitor Attributes provides information about the attached monitor . Y ou can also enable Extended Display Identification Data (EDID). EDID uses the information provided by the attached monitor to determine the limits for the resolution and re- fresh rate.
- 22 - GV-R477 Series Graphics Accelerator 3D: Standard Settings The Standard Settings page provides access to a universal slider control where you can simulta- neously adjust all of the standard 3D settings for any type of 3D application.
- 2 3 - Software Installation Anisotropic Filtering Anisotropic Filtering is a technique that preserves detail on surfaces that have three-dimensional per- spective and fade away into the background. It works best when used in conjunction with Mipmapping.
- 24 - GV-R477 Series Graphics Accelerator All Settings The All Settings page combines all of the princi- pal 3D features onto a single page, without any preview window, allowing for quick access and adjustment. This page is useful when it is not necessary to preview the adjusted settings be- cause the effect is already known or understood.
- 2 5 - Software Installation Avivo TM Video: Presets T o quickly adjust your video settings choose one of the video presets. Note: These settings will only affect applications with video overlay support. Basic Color Use the Avivo Color: Basic option to manually set Gamma, Brightness, Contrast, Saturation, and Tint for video playback.
- 26 - GV-R477 Series Graphics Accelerator All Settings The All Settings page combines all of the princi- pal Video features onto a single page, without any preview window, allowing quick access and adjustment. This page is useful when it is not necessary to preview the adjusted settings because the effect is already known or understood.
- 2 7 - Software Installation A TI Overdrive: Use Overdrive to maximize your viewing experience by dynamically and safely overclocking the graphics processor and memory . Use the Automated clock configuration utility to obtain the A TI recom- mended speeds for the graphics processor clock and video memory clock.
- 28 - GV-R477 Series Graphics Accelerator 4. T roubleshooting Tips The following troubleshooting tips may help if you experience problems. Contact your dealer or GIGABYTE for more advanced troubleshooting information. Check that the card is seated properly in the PCI Express x16 slot.
- 29 - Appendix 5. Appendix 5.1. Resolutions and Color Depth T ables Radeon TM HD 4770 Series 2D Single Display Modes Display Refresh Color Depth (bpp) Screen Rate 8bpp(256 color) 16bpp(65K color) 32bpp(16.
- 30 - GV-R477 Series Graphics Accelerator 5.2. Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose.
- 31 - Appendix Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly.
- 32 - GV-R477 Series Graphics Accelerator.
An important point after buying a device Gigabyte GV-R477UD-1GI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gigabyte GV-R477UD-1GI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gigabyte GV-R477UD-1GI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gigabyte GV-R477UD-1GI you will learn all the available features of the product, as well as information on its operation. The information that you get Gigabyte GV-R477UD-1GI will certainly help you make a decision on the purchase.
If you already are a holder of Gigabyte GV-R477UD-1GI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gigabyte GV-R477UD-1GI.
However, one of the most important roles played by the user manual is to help in solving problems with Gigabyte GV-R477UD-1GI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gigabyte GV-R477UD-1GI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
