Instruction/ maintenance manual of the product GV-NX62TC256DS Gigabyte
Go to page of 68
Aug. 2, 2005 VGA Card GV-NX62TC256DS.
V GA Card Aug. 2, 2005 G V -NX62TC256DS.
Copyright © 2005 GIGABYTE TECHNOLOGY CO., L T D Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT . Trademarks Third-party brands and names are the property of their respective owners.
GV-NX62TC256DS Graphics Accelerator - 2 - English T able of Contents 1. Introduction ......................................................................................... 3 1.1. Features ............................................................
Introduction - 3 - English 1. Introduction 1.1. Features • The graphics card supports NVIDIA TurboCache technology, which enhances graphics card performance by allowing the graphics processing unit (GPU) to dynamically share the available system memory.
GV-NX62TC256DS Graphics Accelerator - 4 - English 2. Hardware Installation 2.1. Board Layout TV-out DVI-I Connector TV-Out DVI-I Connector NTSC / PAL TV Projector AV Output Analog LCD Monitor Digital .
Hardware Installation - 5 - English Expansion cards contain very delicate Integrated Circuit (IC) chips. T o protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Turn off your computer and unplug power supply.
GV-NX62TC256DS Graphics Accelerator - 6 - English 2.2. Hardware installation Installing Y our graphics card. Now that you have prepared your computer, you are ready to install your graphics accelerator card.
Hardware Installation - 7 - English T o install your new graphics card: 1. Locate the PCI Express x 16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x 16 slot, and press it in firmly until the card is fully seated.
GV-NX62TC256DS Graphics Accelerator - 8 - English 3. Software Installation In this manual, we assume that your CD-ROM Drive letter to be Drive D: The installation of Win ® 2000 / Win ® XP drivers is very simple. When you insert the driver CD into your CD-ROM drive, you can see the AUTORUN window (if it does not show up, run "D:setup.
Software Installation - 9 - English 3.1.2. DirectX installation Install Microsoft DirectX to enable 3D hardware acceleration support for Windows ® 2000 or Windows ® XP to achieve better 3D performance. 0 Note: For software MPEG support in Windows ® 2000 or Windows ® XP, you must install DirectX first.
GV-NX62TC256DS Graphics Accelerator - 10 - English Step 4. Click "Finish" to restart computer. Then the DirectX 9 installation is completed. Installing the components.
Software Installation - 11 - English 3.1.3. Driver installation A. New hardware found After the graphics card is inserted into your computer at the first time, the windows will automatically detect a new hardware in the system and pop out a "New Hardware Found" message.
GV-NX62TC256DS Graphics Accelerator - 12 - English B. Driver installation (Autorun Window) Insert the driver CD disk into your CD-ROM, and then you can see the AUTORUN window . If it does not show up, please run "D:setup.exe". Step 1. When autorun window show up, click Install Display Driver item.
Software Installation - 13 - English 3.1.4. Utilities on driver CD Insert the driver CD disk into your CD-ROM, and then you can see the AUTORUN window . If it does not show up, please run "D:setup.exe". • Install V -T uner 2: Step 1.Click "Utilities" item.
GV-NX62TC256DS Graphics Accelerator - 14 - English V -T uner 2 V -T uner 2 lets you adjust the working frequency of the graphic engine and video memory (Core Clock and Memory Clock). Enables auto adjustment of core/ memory clock settings set by user when running 3D applications.
Software Installation - 15 - English 3.1.5. T askbar icon After installation of the display drivers, you will find a GIGABYTE icon on the taskbar's status area. Right-clicking this icon opens the GIGABYTE control panel, showing a menu composed of shortcut of the graphics card's enhanced and other functions.
GV-NX62TC256DS Graphics Accelerator - 16 - English VGA Information VGA Info lists the relevant information about your card. Color Adjust Color Adjust allows you to make color adjustments, such as brightness, contrast and gamma values for each or all of RGB colors.
Software Installation - 17 - English After installation of the display drivers, you will find a NVIDIA icon on the taskbar's status area. Click this icon to open the control panel. Y ou can adjust the properties of the graphics accelerator from here.
GV-NX62TC256DS Graphics Accelerator - 18 - English GeForce 6200 T urboCache(TM) properties Y ou can click the item to change the color depth. Y ou can move the slider to change the resolution. This page shows the Adapter, System and Driver version information.
Software Installation - 19 - English nView allows you to connect separate displays to single graphics card. • nView display modes: select your preferred nView display modes here. Options: Single display/ Clone / Horizontal span / V ertical span/ Dualview • Display pair: select a single display or display pair.
GV-NX62TC256DS Graphics Accelerator - 20 - English Video Overlay Settings properties The Overlay Controls Properties can adjust Overlay zoom controls and Overlay color controls. There is only one video overlay, which is only available on the Primary display .
Software Installation - 21 - English T emperature Settings properties The T emperature Properties can auto detected the GPU Core temperature. Y ou can select the Notify when GPU core temperature exceeds threshold check box.
GV-NX62TC256DS Graphics Accelerator - 22 - English Menu Editing properties The Menu Editing Properties can remove infrequently used screens by dragging them from the screen menu to the list below. Restore screens to the menu by dragging them individually, or click Restore Defaults.
- 23 - English Resolutions and Color Depth T able Click the item to start nView Properties. Access nView properties page: T o access the nV iew properties page, you can click the NVIDIA icon on the taskbar and select nView Properties under nView Destop Manager (Method A).
GV-NX62TC256DS Graphics Accelerator - 24 - English nView Windows properties This tab allows you to control of window and dialog box placement when using multiple monitors. nView Applications properties This tab allows you to control nView settings depending on different applications.
- 25 - English Resolutions and Color Depth T able nView User Interface properties This tab allows customization of the nView user interface. nView Effects properties This tab provides special windows effects that you can apply to your applications.
GV-NX62TC256DS Graphics Accelerator - 26 - English nView Hot Keys properties This tab lets you perform various actions with shortcut keys or key combinations. nView Mouse properties This tab can modify and extend mouse behavior with kinematic actions.
- 27 - English Resolutions and Color Depth T able 3.2. Win ® 2000 driver installation With Windows running on your computer, you need to install the graphics card driver to take advantage of the higher performance, resolutions, and special graphics features of the graphics card.
GV-NX62TC256DS Graphics Accelerator - 28 - English 4. T roubleshooting T ips The following troubleshooting tips may help if you experience problems. Contact your dealer or GBT for more advanced troubleshooting information. Check that the card is seated properly in the PCI Express x 16 slot.
Appendix - 29 - English 5. Appendix 5.1. How to Reflash the BIOS 5.1.1. Reflash BIOS in MS-DOS mode 1. Extract the downloaded Zip file to your hard disk(s) or floppy disk. This procedure assumes drive A. 2. Restart the computer in MS-DOS mode. (For Windows 2000/XP, you need a startup disk to restart the computer in MS-DOS mode.
GV-NX62TC256DS Graphics Accelerator - 30 - English 5.2. Resolutions and Color Depth T able (In Windows ® XP) GeForce 6200 TurboCache(TM) Single Display Stardard Modes Display Refresh Color Depth (bpp) Screen Rate 8bpp(256 color) 16bpp(65K color) 32bpp(16.
Appendix - 31 - English Display Refresh Color Depth (bpp) Screen Rate 8bpp(256 color) 16bpp (65K color) 32bpp (16.7M) Resolution (Hz) Standard mode High mode True mode 1600 x 1200 60~100 33 3 120 33 X 1920 x 1080 30~85 33 3 100 33 X 1920 x 1200 60~85 33 3 100 33 X 1920 x 1440 60~85 33 3 2048 x 1536 60~85 33 3 * This table is for reference only.
GV-NX62TC256DS Graphics Accelerator - 32 - English.
© 2005 GIGABYTE TECHNOLOGY CO., L T D GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT") . GBT GV -NX62TC256DS GeForce ™ 6200 Rev. 101.
GV-NX62TC256DS - 2 - 1. ................................................................................................... 3 1.1. ................................................................................................. 3 1.2. ...............
- 3 - 1. 1.1. NVIDIA Turbo Cache NVIDIA ® GeForce ™ 6200 TurboCache (GPU) PCI Express x 16 DirectX 9.0c AV S-Video HDTV D-Sub( ) DVI-I 1.2. IBM 100% PC Intel Pentium ® III 650MHz AMD Athlon 650MHz.
GV-NX62TC256DS - 4 - 2. 2.1. TV-Out DVI-I Connector NTSC / PAL TV Projector AV Output Analog LCD Monitor Digital LCD Monitor DVI Output DVI-I to D-Sub Adapter VGA Output TV-out DVI-I Connector.
- 5 - 1. 2. 3. 0 0 BIOS BIOS BIOS VGA.
GV-NX62TC256DS - 6 - 2.2. 2. ( ) 3. 1..
- 7 - 2. ! To Flat Panel Display To TV or VCR 1. PCI Express x 16 * DVI 3. DVI DVI-I D-sub 15-pin VGA.
GV-NX62TC256DS - 8 - 3. CD-ROM D Windows ® 2000 Windows ® XP AUTORUN "D:setup.exe" AUTORUN 3.1.3. " " 3.1. Win ® XP 3.1.1. • DirectX 9C ( ) • Intel ( SIS VIA ) 1.
- 9 - 3.1.2. DirectX Microsoft DirectX 3D Windows ® 2000/XP 3D 0 Windows ® 2000 / XP DirectX MPEG Windows XP SP2 ( SP2) DirectX 1 " DirectX 9" " DirectX 9" 2 " " 3 &quo.
GV-NX62TC256DS - 10 - 4 " " DirectX.
- 11 - 3.1.3. A. PCI Express x 16 Windows " " 1 (VGA ) 3 " " " " Windows ( ) " " AUTORUN 2.
GV-NX62TC256DS - 12 - B. (AUTORUN ) AUTORUN "D:setup.exe" 1 " " " " 2 " " 3 " ".
- 13 - 3.1.4. AUTORUN "D:setup.exe" • V-Tuner 2 1 " " 2 "GIGABYTE Utility" 4 5 "Finish" GIGABYTE Utility 3 "Next".
GV-NX62TC256DS - 14 - V-Tuner 2 V-Tuner 2 (Core Clock Memory Clock) Enables auto adjustment of core/ memory clock settings set by user when running 3D applications.
- 15 - 3.1.5. Windows V- Tuner 2 " " " " " " "VGA " "VGA Info" "Color Adjust".
GV-NX62TC256DS - 16 - VGA Info VGA Info Color Adjust Color Adjust RGB Gamma.
- 17 - NVIDIA NVIDIA NVIDIA "nView".
GV-NX62TC256DS - 18 - " " (color depth) GeForce 6200 TurboCache(TM) 3.1.6. " " " " " " " " " " " NVIDIA GeForce 6200 TurboCache(TM).
- 19 - ( ) • nView (Dual View) • [ ] [ ] [ ] [ ] nView • • Direct3D OpenGL • 3D / gamma Display M odel GV-NX62TC256DS Matrix CRT+TV Y es CRT+DVI Y es DVI+TV Y es.
GV-NX62TC256DS - 20 - DVD NVIDIA Windows • NVIDIA • • .
- 21 - NVIDIA GPU • 0 • 90 • 180 • 270.
GV-NX62TC256DS - 22 - " " nView Desktop Manager 3.1.7. nView nView NVIDIA nView nView nView Desktop Manager GeForce 6200.
- 23 - nView nView nView NVIDIA "nView Desktop Manager" "nView " ( A) " " " " Geforce 6200 TurboCache(TM)" " ( B) A B nView nView " ".
GV-NX62TC256DS - 24 - 32 nView.
- 25 - nView " " .
GV-NX62TC256DS - 26 - nView.
- 27 - 3.2. Win ® 2000 CD AUTORUN " " AUTORUN 1. " " 2. " " 3. "D:SETUP.exe" D 4. "OK" 5. " " 6.
GV-NX62TC256DS - 28 - 4. PCI Express x 16 15 pin VGA ( ) Nvidia F8 [Windows ] ENTER " " " " Windows / ( ).
- 29 - 5. 5.1. BIOS 5.1.2. @VGA BIOS 1. GIGABYTE Utility @VGA @VGA BIOS 2. Internet BIOS a. Live Update Flash @VGA BIOS ( @VGA BIOS @VGA ) 3. Internet BIOS a. BIOS b. From Local File Flash c. BIOS d. BIOS 5.1.1. DOS BIOS 1. VGA BIOS A 2. MS-DOS Windows XP / 2000 MS-DOS 3.
GV-NX62TC256DS - 30 - 5.2. Windows XP GeForce 6200 TurboCache(TM) Single Display Stardard Modes 8bpp (256 ) 16bpp (65K ) 32bpp (16.7M ) (Hz) 320 x 200 60~75 33 3 320 x 240 60~75 33 3 400 x 300 60~75 3.
- 31 - * 8bpp (256 ) 16bpp (65K ) 32bpp (16.7M ) (Hz) 1600 x 1200 60~100 33 3 120 33 X 1920 x 1080 30~85 33 3 100 33 X 1920 x 1200 60~85 33 3 100 33 X 1920 x 1440 60~85 33 3 2048 x 1536 60~85 33 3.
GV-NX62TC256DS - 32 -.
- 33 -.
GV-NX62TC256DS - 34 -.
An important point after buying a device Gigabyte GV-NX62TC256DS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gigabyte GV-NX62TC256DS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gigabyte GV-NX62TC256DS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gigabyte GV-NX62TC256DS you will learn all the available features of the product, as well as information on its operation. The information that you get Gigabyte GV-NX62TC256DS will certainly help you make a decision on the purchase.
If you already are a holder of Gigabyte GV-NX62TC256DS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gigabyte GV-NX62TC256DS.
However, one of the most important roles played by the user manual is to help in solving problems with Gigabyte GV-NX62TC256DS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gigabyte GV-NX62TC256DS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
