Instruction/ maintenance manual of the product GV-N250OC-1GI (rev. 2.0) Gigabyte
Go to page of 30
GV -N250ZL-1GI/ GV -N250OC-1GI/ GV -N250ZL-1GI rev2.0/ GV -N250OC-1GI rev2.0 NVIDIA ® GeForce TM GTS 250 Graphics Accelerator User's Manual Rev. 202 12MM-N250ZGI-202R Copyright © 2010 GIGABYTE TECHNOLOGY CO., L TD Copyright by GIGA-BYTE TECHNOLOGY CO.
V GA Card G V -N250ZL-1GI Feb.16,2009 Feb.16,2009 VGA Card GV-N250ZL-1GI.
V GA Card G V -N250OC-1GI Mar.06,2009 Mar.06,2009 VGA Card GV-N250OC-1GI.
V GA Card G V -N250ZL-1GI rev2.0 July.07,2009 July.07,2009 VGA Card GV-N250ZL-1GI rev2.0.
V GA Card G V -N250OC-1GI rev2.0 June.08,2009 June.08,2009 VGA Card GV-N250OC-1GI rev2.0.
- 6 - T able of Contents 1. Introduction ................................................................................................................ 7 1.1. Features .................................................................................
- 7 - Introduction 1. Introduction 1.1. Features • Powered by NVIDIA ® GeForce TM GTS 250 Graphics Processing Unit (GPU) • Supports PCI Express 2.0 • Integrated with 1 GB GDDR3 memory (For GV -N250ZL-1GI/GV -N250OC-1GI/ GV -N250ZL-1GI rev2.0/GV -N250OC-1GI rev2.
- 8 - GV-N250 Series Graphics Accelerator 2. Hardware Installation 2.1. Board Layout DVI-I Connector D-Sub monitor Connector (15-pin) HDMI Connector SLI Connector DVI-I Connector Digital LCD Monitor D.
- 9 - Hardware Installation Expansion cards contain very delicate Integrated Circuit (IC) chips. T o protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Turn off your computer and unplug power supply.
- 10 - GV-N250 Series Graphics Accelerator 2.2. Hardware Installation Now that you have prepared your computer, you are ready to install your graphics card.
- 1 1 - Hardware Installation Y ou are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. Step 4. T o connect an HDMI TV , follow the steps below to enable the S/PDIF in function for the graphics card.
- 12 - GV-N250 Series Graphics Accelerator 3. Software Installation Notice the following guidelines before installing the drivers: 1 . First make sure your system has installed DirectX 9 or later version.
- 1 3 - Software Installation The system is installing the components. Step 4: Click the Finish button to restart the computer. Then the driver installation is completed.
- 14 - GV-N250 Series Graphics Accelerator 3.1.2. GIGABYTE Gamer HUD Lite on Driver Disk Step 1: Click the GIGABYTE Gamer HUD Lite item. Step 2: Choose the language for the installation and click the OK button. Step 3: Click the Next button. Step 4: Click the Install button.
- 1 5 - Software Installation GIGABYTE Gamer HUD Lite The GIGABYTE Gamer HUD Lite allows you to adjust the voltage of your graphics card and the working frequency of the GPU, Shader, and video memory. (Note) This item is configurable only if 2D/3D Auto-Optimized is set to Disable .
- 16 - GV-N250 Series Graphics Accelerator Y ou can move the slider to change the resolution. Y ou can click the item to change the color quality . Click the Advanced button for advanced settings.
- 1 7 - Software Installation Or you can right-click on the desktop and select Personalize, and then the Control PanelAppearance Personalization Personalization window will show up. Select Display Settings . When the Display Settings dialog box appears, click Advanced Settings.
- 18 - GV-N250 Series Graphics Accelerator Select the view of the NVIDIA Control Panel that is most appropriate for you. Standard Settings Advanced Settings The following pages provide details on configuring advanced settings. In the NVIDIA Control Panel, select a category to alter specific NVIDIA display settings.
- 1 9 - Software Installation Adjust Image Settings with Preview If you are unfamiliar with 3D technology or not an advanced graphics user, use the Adjust Image Settings with Preview page to preview any changes you make for improved image quality and rendering.
- 20 - GV-N250 Series Graphics Accelerator Display A variety of display features enable you to further manipulate and configure your display settings to optimize the use of your displays.
- 2 1 - Software Installation Adjust Desktop Color Settings Use this page to set the contrast, sharpness, and color depth (Digital Vibrance) of the im- ages on your desktop. These changes will not affect any video playback. T o change video color settings, go to Adjust Video Color Set- tings under the Video and TV section from the Start page.
- 22 - GV-N250 Series Graphics Accelerator Set Up Multiple Displays NVIDIA nView technology enables you to view your desktop in one of several multi-display modes to make the best use of the displays (monitors) that are connected to your computer.
- 2 3 - Software Installation (4) As one large vertical desktop (Vertical span) (Note 1) Vertical Span mode indicates that both displays in the display pair function as one tall virtual desktop. The height of each display is half the height of the total virtual desktop height.
- 24 - GV-N250 Series Graphics Accelerator Video & T elevision Video and television features are similar to those for analog for optimal viewing. T asks in the Video & T elevision pages allow you to do the following: • Adjust your television picture quality and video color settings for the best possible viewing in its environment.
- 2 5 - Troubleshooting Tips 4. T roubleshooting Tips The following troubleshooting tips may help if you experience problems. Contact your dealer or GIGABYTE for more advanced troubleshooting information. Check that the card is seated properly in the PCI Express x16 slot.
- 26 - GV-N250 Series Graphics Accelerator 5. Appendix 5.1. How to Reflash the BIOS in MS-DOS Mode 1 . Extract the downloaded Zip file to your hard disk(s) or floppy disk. This procedure assumes drive A. 2. Restart the computer in MS-DOS mode. (Y ou may need a startup disk to restart the computer in MS-DOS mode.
- 27 - Appendix 5.2. Resolutions and Color Depth T ables GeForce GTS 250 Single Display Standard Modes Display Refresh Color Depth (bpp) Screen Rate 8bpp(256 color) 16bpp(65K color) 32bpp(16.
- 28 - GV-N250 Series Graphics Accelerator Display Refresh Color Depth (bpp) Screen Rate 8bpp(256 color) 16bpp(65K color) 32bpp(16.7M) Resolution (Hz) Standard mode High mode True mode 1600 x 1200 60~.
- 29 - Appendix Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at the time of printing.
- 30 - GV-N250 Series Graphics Accelerator Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where app.
An important point after buying a device Gigabyte GV-N250OC-1GI (rev. 2.0) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gigabyte GV-N250OC-1GI (rev. 2.0) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gigabyte GV-N250OC-1GI (rev. 2.0) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gigabyte GV-N250OC-1GI (rev. 2.0) you will learn all the available features of the product, as well as information on its operation. The information that you get Gigabyte GV-N250OC-1GI (rev. 2.0) will certainly help you make a decision on the purchase.
If you already are a holder of Gigabyte GV-N250OC-1GI (rev. 2.0), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gigabyte GV-N250OC-1GI (rev. 2.0).
However, one of the most important roles played by the user manual is to help in solving problems with Gigabyte GV-N250OC-1GI (rev. 2.0). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gigabyte GV-N250OC-1GI (rev. 2.0) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
