Instruction/ maintenance manual of the product GA-X58A-UD3R Gigabyte
Go to page of 136
GA-X58A-UD3R LGA1366 socket motherboard for Intel ® Core ™ i7 processor family User's Manual Rev . 20 01 12ME-X5 8 AU3 R-20 01R.
Motherboard GA-X58A-UD3R Jan. 8, 2010 Jan. 8, 2010 Motherboard GA-X58A-UD3R.
Copyright © 2010 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
- 4 - T able of Contents Box Contents ................................................................................................................... 6 Optiona l Items ...............................................................................
- 5 - Chapter 3 Dri vers Installati on ....................................................................................... 6 5 3 - 1 Inst allin g Chipset D river s ............................................................................... 65 3 -2 App lic ation S of t ware .
- 6 - Bo x Contents GA-X58A-UD3R motherboard Motherboard driver disk User's Manual Quick Installation Guide One IDE cable Four SA T A cables I/O Shield One 2-W ay SLI bridge connector One 3-W ay SLI bridge connector Optional I tems Floppy disk drive cable (Part No.
- 7 - GA-X 58A- UD3R Motherboard Lay out (Note) Due to a hardware limitation, the PCIEX1_1 slot can only accommodate a shorter PCI Express x1 expansion card.
- 8 - GA-X 58A- UD3R Motherboard Block Diagram (Note) Two share the same ports with eSA T A. PS/2 KB/Mouse LGA1366 CPU QPI Interface Intel ® X58 IOH CLK (133 MHz) Intel ® ICH10R 1 PCI PCI Bus PCI CLK (33 MHz) PCIe CLK (100 MHz) PCIe CLK (100 MHz) PCIe CLK (100 MHz) PCI Express Bus Floppy CPU CLK+/- (133 MHz) 6 SA TA 3Gb/s Dual BIOS 12 USB 2.
- 9 - Hardware Installation 1- 1 Installation Pr ec autions Th e m oth er boa rd co nta in s n ume ro us de lic at e e lec tr oni c c ir cui ts an d c om pon en ts whi ch ca n become damaged as a result of electrostatic discharge (ESD).
Hardware Installation - 10 - 1- 2 Product Specications CPU Support for an Intel ® Core ™ i7 series processor in the LGA1366 package (Go to GIGABYTE's website for the latest CPU support list.) L3 cache varies with CPU QPI 4.8GT/s, 6.
- 1 1 - Hardware Installation Storage Interface JMicron JMB362 chip: - 2 x eSA T A 3Gb/s connectors (eSA T A/USB Combo) on the back panel sup- porting up to 2 SA T A 3Gb/s devices - Support for SA.
Hardware Installation - 12 - (Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
- 13 - Hardware Installation 1-3 Installing the CPU and C PU Cooler 1-3 -1 I nsta lling t he CPU A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
Hardware Installation - 14 - Step 1: Completely raise the CPU socket lever . Step 3: U se y ou r th u m b a n d i n d e x f i n g er t o h o ld t h e pr ot ec ti ve s oc ke t c ov er as i nd ic at ed an d li ft it up v er tic al ly. (D O N OT to uc h so cke t c ont ac ts.
- 15 - Hardware Installation 1-3 -2 I nsta lling t he CPU Coo ler Follow the steps below to correctly install the CPU cooler on the motherboard. (The following procedure uses Intel ® boxed cooler as the example cooler .) Step 1: Apply an even and thin layer of thermal grease on the surface of the installed CPU.
Hardware Installation - 16 - 1- 4 -1 Du al/3 Ch anne l Mem or y Con gur ati on This motherboard provides six DDR3 memory sockets and supports Dual/3 Chan- nel T echnology . After the memory is installed, the BIOS will automatically detect the specications and capacity of the memory .
- 17 - Hardware Installation 1- 4 -2 In sta lling a M emo r y Notch DDR3 DIMM A DDR3 memory module has a notch, so it can only t in one direction. Follow the steps below to correctly install your memory modules in the memory sockets.
Hardware Installation - 18 - 1-5 Installing an Expansion Card Follow the steps below to correctly install your expansion card in the expansion slot. 1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.
- 19 - Hardware Installation (Note) The bridge connectors may be needed or not depending on your graphics cards. 1-6 Setup of A TI Cr ossFire X ™ /SLI Congu rat ion A.
Hardware Installation - 20 - 1- 7 B ack Panel Connectors PS/2 Keyboard and PS/2 Mouse Port Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 key- board. Optical S/PDIF Out Connector This connector provides digital audio out to an external audio system that supports digital optical audio.
- 21 - Hardware Installation USB 3.0/2.0 Port TheUSB 3.0port supportsthe USB3.0 specicationand iscompatible tothe USB2.0/1.1 specication. UsethisportforUSBdevicessuchasaUSBkeyboard/mouse,USBprinter ,USBashdriveandetc.
Hardware Installation - 22 - 1-8 Onboard LEDs and Switches Overvoltage LEDs This moth erbo ard co ntai ns 4 s ets o f ove rvol tage LEDs which indi cate the o verv oltag e lev el of the C PU, memory , North Bridge, and South Bridge.
- 23 - Hardware Installation PHASE LED The number of lighted LEDs indicates the CPU loading. The higher the CPU loading, the more the number of lightedLEDs.T o enablethe PhaseLED displayfunction, please rstenable DynamicEnergy Saver2.
Hardware Installation - 24 - 1-9 Internal Connec tors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Be fore i nstal ling the de vices , be s ure t o turn off th e devi ces a nd you r com puter.
- 25 - Hardware Installation DEBUG PO RT G.QBOFM A TX_12V_2X: A TX_12V_2X 5 8 1 4 DEBUG PO RT G.QBOFM 13 1 24 12 A TX A TX: PinNo. Denition 13 3.3V 14 -12V 15 GND 16 PS_ON (soft On/Off) 17 GND 18 GND 19 GND 20 -5V 21 +5V 22 +5V 23 +5V (Only for 2x12-pi n A TX) 24 GND (On ly f or 2x 12-p in A TX) PinNo.
Hardware Installation - 26 - 3/4/5) CPU_F AN/SYS_F AN1/SYS_F AN2/SYS_F AN3/PWR_F AN (Fan Headers) The motherboard has a 4-pin CPU fan header (CPU_FAN), a 4-pin (SYS_F AN2) and two 3-pin (SYS_ F AN1/SYS_F AN3) system fan headers, and a 3-pin power fan header (PWR_FAN).
- 27 - Hardware Installation 8) IDE (IDE Connector) The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attach- ing the IDE cable, locate the foolproof groove on the connector.
Hardware Installation - 28 - 9) SA T A2_0/1/2/3/4/5 (SA T A 3Gb/s Connectors, Controlled by ICH10R) The SA T A conne ctors conform to SA TA 3G b/s standard and are compatible with SA T A 1.5Gb/s stan- dard. Each SA T A connector supports a single SA TA device.
- 29 - Hardware Installation A RAID0orRAID1congurationrequirestwoharddrives. 12) BA T (Battery) Thebatteryprovidespowertokeepthevalues(suchasBIOScongurations,date,and timeinformation) in the CMOS when the computer is turned off.
Hardware Installation - 30 - 13) F_P ANEL (Front Panel Header) Conne ct the power switc h, res et swi tch, s peaker, chass is int rusio n swit ch/sen sor an d syst em sta tus indicator on the chassis to this header according to the pin assignments below .
- 31 - Hardware Installation 14) F_AUDIO (Front Panel Audio Header) ThefrontpanelaudioheadersupportsIn telHighDenitionaudio(HD)and AC'97audio .Y oumayconnect your chassis front panel audio module to this header.
Hardware Installation - 32 - 16) SPDIF_I (S/PDIF In Header) This header supports digital S/PDIF In and can connect to an audio device that supports digital audio out via an optional S/PDIF In cable. For purchasing the optional S/PDIF In cable, please contact the local dealer .
- 33 - Hardware Installation 18) F_USB1/F_USB2/F_USB3 (USB Headers) Theheaders conform to USB2.0/1.1 specication. EachUSB header can providetwo USB portsvia an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer .
Hardware Installation - 34 -.
- 35 - BIOS Setup BIOS (B asic In put and Output System) records hardware parame ters of the sys tem in t he CMOS on the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving system pa rameters a nd loadin g operatin g system, etc.
BIOS Setup - 36 - 2-1 Startup Screen The following screens may appear when the computer boots. A. The LOGO Screen (Default) B. The POST Screen Function Keys: <T AB>: POST SCREEN Press the <T ab> key to show the BIOS POST screen.
- 37 - BIOS Setup 2-2 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use ar- row keys to move among the items and press <Enter> to accept or enter a sub-menu.
BIOS Setup - 38 - The Functions of the <F1 1> and <F12> keys (For the Main Menu Only) F1 1: Save CMOS to BIOS This function allows you to save the current BIOS settings to a prole.
- 39 - BIOS Setup 2-3 MB Intelligent T weaker(M.I.T .) (Note 1) This item appears only if you install a CPU that supports this feature. (Note 2) This item appears only if you install a memory module that supports this feature.
BIOS Setup - 40 - CPU Clock Ratio (Note) Allows you to alter the clock ratio for the installed CPU. The item is present only if a CPU with unlocked clock ratio is installed. CPU Frequency Displays the current operating CPU frequency . Intel(R) T urbo Boost T ech.
- 41 - BIOS Setup CPU Cores Enabled (Note) Allows you to determine whether to enable all CPU cores. All Enables all CPU cores. (Default) 1 Enables only one CPU core.
BIOS Setup - 42 - QPI Clock Ratio Allows you to set the QPI clock ratio. Options are: Auto (default), x36, x44, x48, Slow Mode. Uncore Clock Ratio Displays the Uncore clock ratio. Options are: Auto (default), x12~x48. Isochronous Support DetermineswhethertoenablespecicstreamsbetweentheIOHandICH.
- 43 - BIOS Setup >>>>> Standard Clock Control Base Clock(BCLK) Control Enables or disables the control of CPU base clock. Enabled will allow the BCLK Frequency(Mhz) item belowtobecongurable.
BIOS Setup - 44 - Performance Enhance Allows the system to operate at three different performance levels. Standard Lets the system operate at its basic performance level. Turbo Lets the system operate at its good performance level. (Default) Extreme Lets the system operate at its best performance level.
- 45 - BIOS Setup >>>>> Channel A/B/C Standard T iming Control CAS Latency Time Options are: Auto (default), 5~15. tRCD Options are: Auto (default), 1~15. tRP Options are: Auto (default), 1~15. tRAS Options are: Auto (default), 1~31. >>>>> Channel A/B/C Advanced Timing Control tRC Options are: Auto (default), 1~63.
BIOS Setup - 46 - tWTP Options are: Auto (default), 1~31. tWL Options are: Auto (default), 1~10. tRFC Options are: Auto (default), 1~255. tRTP Options are: Auto (default), 1~15. t FAW Options are: Auto (default), 1~63. Command Rate(CMD) Options are: Auto (default), 1~3.
- 47 - BIOS Setup >>>>> Channel A/B/C W rites Followed by Writes Different DIMMs Options are: Auto (default), 1~8. Different Ranks Options are: Auto (default), 1~8.
BIOS Setup - 48 - >>>>> CPU Load-Line Calibration Enabl es or d isable s Load -Line C alibra tion. Thi s item allow s you t o adju st Vdro op at different level s. Enabling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load.
- 49 - BIOS Setup Date (mm:dd:yy) Setsthesystemdate.Thedateformatisweek(re ad-only),month,dateandyear .Selectthedesiredeld and use the up arrow or down arrow key to set the date. Time (hh:mm:ss) Sets the system time.
BIOS Setup - 50 - • None If no IDE/SA T A devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup.
- 51 - BIOS Setup (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website.
BIOS Setup - 52 - Limit CPUID Max. to 3 (Note) Allows you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows XP operating system; set this item to Enabled for legacy operating system such as Windows NT4.
- 53 - BIOS Setup 2-6 Integrated Peripherals eXtreme Hard Drive (Intel ICH10R South Bridge) Enables or disables the X.H.D function for the SA T A controllers integrated in the Intel ICH10R South Bridge. When set to Enabled , the ICH SAT A Control Mode item below will be set to RAID(XHD) au- tomatically .
BIOS Setup - 54 - RAID(XHD) Enables RAID for the SA T A controllers. AHCI CongurestheSA T Acontrollersto AHCImode.AdvancedHostControllerInterface .
- 55 - BIOS Setup SMART LAN (LAN Cable Diagnostic Function) CMOS Setup Utility-Copyright (C) 1984-2010 A ward Software SMAR T LAN Start detecting at Port.
BIOS Setup - 56 - eSA T A Controller (JMicron JMB362 Chip, eSA T A Connectors) Enables or disables the SA T A controller integrated in the JMicron JMB362 chip.
- 57 - BIOS Setup ACPI Suspend T ype Speciesthe ACPIsleepstatewhenthesystementerssuspend. S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1 sleep state, the system appears suspended and stays in a low power mode.
BIOS Setup - 58 - (Note) Supported on Windows 7/Vista operating system only . Resume by Alarm Determines whether to power on the system at a desired time.
- 59 - BIOS Setup Reset Case Open Status Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous chassis intrusion status and the Case Opened eldwillshow"No"atnextboot.
BIOS Setup - 60 - CPU Smart F AN Mode Specieshowtocontrol CPUfanspeed.Thisitemiscongurable onlyif CPU Smart FAN Control is set to Enabled . Auto Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU fan control mode.
- 61 - BIOS Setup Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings. In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable BIOS settings for the motherboard.
BIOS Setup - 62 - Press <Enter> on this item and type the password with up to 8 characters and then press <Enter>. Y ou will berequestedtoconrmthepassword.
- 63 - BIOS Setup Press <Enter> on this item and press the <Y> key . This saves the changes to the CMOS and exits the BIOS Setup program. Press <N> or <Esc> to return to the BIOS Setup Main Menu.
BIOS Setup - 64 -.
- 65 - Drivers Installation 3-1 Installing Chipset Drivers Chapter 3 Drivers Installation • Beforeinstallingthedrivers,rstinstalltheoperatingsystem. • After installing the operating system, insert the motherboard driver disk into your optical drive.
Drivers Installation - 66 - 3-2 Application Software This page displays all the utilities and applications that GIGABYTE develops and some free software.
- 67 - Drivers Installation 3-4 Contact For the detailedcontact information of the GIGABYTE T aiwan headquarteror worldwide branch ofces, click the URL on this page to link to the GIGABYTE website. 3-5 System This page provides the basic system information.
Drivers Installation - 68 - 3-6 Download Center T o update the BIOS, drivers, or applications, click the Dow nload Center button to link to the GIGABYTE website.
- 69 - Unique Features 4-1 Xpress Recovery2 Chapter 4 Unique Features Xp re s s R ec ov er y 2 is a u ti li t y th a t al l ow s y ou to q u ic kl y c om p re ss an d back up your system data and perform restoration of it.
Unique Features - 70 - Step 3: Wh en pa rt it i on in g y ou r h ar d d ri ve , m ak e s ur e t o leave unallocated space (10 GB or more is recom- mended; actual size requirements vary, depending on the amount of data) and begin the installation of the operating system.
- 71 - Unique Features D. Using the Restore Function in Xpress Recovery2 E. Removing the Backup F . Exiting Xpress Recovery2 Sel ec t RESTORE t o re sto re the bac kup to y ou r ha rd d riv e i n case the system breaks down. The RESTORE option will not be present if no backup is created before.
Unique Features - 72 - 4-2 BIOS Update Utilities GI GA BY TE mo th er bo a rd s pr ov i de t wo un iq ue BI OS up da te to ol s, Q- Fl as h ™ a nd @ BI OS ™ . G IG AB YT E Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS mod e.
- 73 - Unique Features B. Updating the BIOS When upda ting the BI OS, choose the locatio n where th e BIOS le is saved. Th e following procedure a s - sumesthatyousavetheBIOSletoaoppydisk.
Unique Features - 74 - CMOS Setup Utility-Copyright (C) 1984-2010 A ward Software Load Optimized Defaults MB Intelligent T weaker(M.I.T .) Standard CMOS Features Advanced BIOS Features .
- 75 - Unique Features 4-2-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin 1. In Windows, close all applications and TSR (T erminate and Stay Resident) programs.
Unique Features - 76 - 4-3 EasyT une 6 GIGABYTE's EasyTune 6 is a simple and easy-to-use interface that allows users to ne-tune their system settings or do overclock/overvoltage in Windows environment.
- 77 - Unique Features 4-4 Dynamic Energy Saver ™ 2 GIGABYTE Dynamic Energy Saver ™ 2 (Note 1) is a revolutionary technology that delivers unparalleled power savings with a click of the button.
Unique Features - 78 - B. T otal Mode In T otal Mode, users are able to see how much total power savings they have accumulated in a set period of time since activating Dynamic Energy Saver ™ 2 for th ersttime (Note 3) .
- 79 - Unique Features 4-5 Q-Share Q-Share is an easy and convenient data sharing too l. After conguring your LAN connection settings and Q-Share, you are able to share your data with computers on the same network, making full use of Internet resources.
Unique Features - 80 - 4-6 Smart 6 ™ GIGABYTE Smart 6 ™ (Note 1) is designed with user-friendliness i n mind, and offers a combination of 6 innova tive software utilities that provide easier and smarter PC system management.
- 81 - Unique Features SMART Recovery With SMART Recovery , users can quickly create backups of changed data les (Note 2) or copy les from a specic backup on P A T A and SA T A hard drives (partitioned on NTFS le system) in Windows Vista.
Unique Features - 82 - (Note 1) When launching Smart 6 ™ forthe rsttime, thesystemwill requestyouto setup apassword,which allowsyou to activate SMART DualBIOS, SMAR T Recorder , or SMART T imeLock or to make any changes.
- 83 - Unique Features 4-7 Auto Green Auto Green is an easy-to-use tool that provides users with simple options to enable system power savings via a Bluetooth cell phone. When the phone is out of the range of the computer's Bluetooth receiver , the sys- temwillenterthespeciedpowersavingmode.
Unique Features - 84 - With GIGABYTE eXtreme Hard Drive (X.H.D) (Note 1) , users can quickly congure a RAID- ready system for RAID 0 when a new SA T A drive is added. For a RAID 0 array that al- ready exists, users also can use X.
- 85 - Appendix Chapter 5 Appendix 5-1 Conguring SA T A Hard Drive(s) T o congure SA T A hard drive(s), follow the steps below: A. Install SA T A hard drive(s) in your computer. B. CongureSA T A controllermodeinBIOSSetup.
Appendix - 86 - The BIOS Setup menus described in this section may differ from the exact settings for your moth- erboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you have and the BIOS version.
- 87 - Appendix C. Conguring a RAID array in RAID BIOS EntertheRAIDBIOSsetuputilitytocongureaRAIDarray .Skipthisstepandproceedwiththe installationof Windowsoperatingsystemforanon-RAIDconguration.
Appendix - 88 - Step 3: After entering the CREA TE VOLUME MENU screen, enter a volume name with 1~16 letters (letters cannot be special characters) under the Name item and press <Enter>.
- 89 - Appendix Step 5: Enter the array capacity and press <Enter>. Finally press <Enter> on the Create V olume item to begin creat- ingtheRAID array .Whenprompted toconrmwhether tocreate thisvolume,press <Y>toconrm or<N>to cancel (Figure 6).
Appendix - 90 - Recovery V olume Options Intel Rapid Recover T echnology provides data protection by allowing users to easily restore data and system operation using a designated recovery drive.
- 91 - Appendix Figure 10 Step 3: Press <Enter> under the Select Disks item. In the SELECT DISKS box, press <T ab> on the hard drive you want to use for the master drive and press <Space> on the hard drive you want to use for the recovery drive.
Appendix - 92 - Delete RAID V olume T o delete a RAID array , se lect Delete RA ID V olume in MAIN MENU and press <Enter>. In the DELE TE VOLUME MENU section, use the up or down arrow key to select the array to be deleted and press <Delete>.
- 93 - Appendix The BIOS Setup menus described in this section may differ from the exact settings for your moth- erboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you have and the BIOS version. Figure 1 Step 2: Save changes and exit BIOS Setup.
Appendix - 94 - C. Conguring a RAID array in RAID BIOS Enter the RAID BIOS setup utility to congure a RAID array . Skip this step and proceed to the installation of Windowsoperatingsystemforanon-RAIDconguration.
- 95 - Appendix Create a RAID Array: In the main screen, press <Enter> on the Create RAID Disk Drive item. Then the Create New RAID screen appears (Figure 4). The Create New RAID block displays all the items that need to be set for creating an array (Figure 5).
Appendix - 96 - 3. Assign Array Disks: After a RAID mode is selected, RAID BIOS automatically as signs the two hard drives installed as the RAID drives. 4. Set Block Size (RAID 0 only): Under the Block item, use the up or down arrow key to select the stripe block size (Figure 6), ranging from 4 KB to 128 KB.
- 97 - Appendix Whennished,thenewRAIDarraywillbedisplayedinthe RAID Disk Drive List block (Figure 8). Figure 8 Model Name RAID Level Capacity Status Members(HDDx) R.
Appendix - 98 - Model Name RAID Level Capacity Status Members(HDDx) RDD0: GRAID 0-Stripe 240 GB Normal 01 [ fg T AB]-Switch Window [ hi ]-Select ITEM [ENTER]-Action [ESC]-Exit [ RAID Disk Drive List ] [ Main Menu ] [ Hard Disk Drive List ] Gigabyte T echnology Corp.
- 99 - Appendix The BIOS Setup menus described in this section may differ from the exact settings for your moth- erboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you have and the BIOS version. 5-1-3 Conguring Marvell 9128 SA T A Controller A.
Appendix - 100 - Figure 2 Figure 3 C. Conguring a RAID array Create a RAID Array: Move the selection bar to HBA 0: Marvell 0 and press <Enter>. Marvell BIOS Setup (c) 2009 Marvell T echnology Group Ltd. T opology Information Help V endor ID : 1B4B Device ID : 91A3 Revision ID : B1 BIOS V ersion : 1.
- 101 - Appendix Figure 4 Figure 5 T ofurthercongure theRAIDarray ,usethe upordown arrowkeytomove theselectionbar toselectanitem in the right block of the screen and press <Enter> (Figure 4).
Appendix - 102 - Figure 6 Figure 7 When completed, you can see the new array under T opologyVirtual Disks (Figure 6). Marvell BIOS Setup (c) 2009 Marvell T echnology Group Ltd. T opology Information Help V endor ID : 1B4B Device ID : 91A3 Revision ID : B1 BIOS V ersion : 1.
- 103 - Appendix Now , you may proceed to create the SA T A driver diskette (for AHCI mode) and the installation of the SA T A driver and operating system. Delete the RAID Array: T o deleted the existing array, select the array on the main menu (example: VD 0: New_VD) and press <En- ter> to display the Delete opti on.
Appendix - 104 - 5-1-4 Making a SA T A RAID/AHCI Driver Diskette (Required for AHCI and RAID Mode) T o successfully install operating system onto SAT A hard drive(s) that is/are congured to RAID/AHCI mode, you need to install the SA T A controller driver during the OS installation.
- 105 - Appendix Figure 5 Figure 4 In Windows mode: Steps: 1: Use an alternative system and insert the motherboard driver disk. 2: From your optical drive folder , double click the Menu.exe lein the BootDrv folder (Figure 4). A Command Prompt window will open similar to that in Figure 5.
Appendix - 106 - 5-1-5 Installing the SA T A RAID/AHCI Driver and Operating System With the SA T A RAID/AHCI driver diskette and correct BIOS settings, you are ready to install Windows Vista/ XP onto your hard drive(s). The followings are examples of Windows XP and Vista installation.
- 107 - Appendix For the JMicron JMB362/GIGABYTE SA TA2: Insert the oppy disk containing the SA T A RAID/AHCI driver and press <S>. Then a controller menu similar to Figure 3 below will appear.
Appendix - 108 - B. Installing Windows Vista The procedure below assumes that only one RAID array exists in your system. Note: Y ou are not required to load the SA T A AHCI driver rst when installing Windows Vista onto the RAID drives attached to the Marvell 9128 controller .
- 109 - Appendix The install menus described in this chapter are for reference only and may differ by driver version. Step 3: When a screen as shown in Figure 7 appears, select Intel(R) ICH8R/ICH9R/ICH10R/DO/PCH SAT A RAID Controller and click Next .
Appendix - 110 - For the JMicron JMB362/GIGABYTE SA TA2: Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears (RAID/AHCI hard drive(s) will not be detected at this stage), select Load Driver (Figure 9).
- 1 11 - Appendix Step 3: When a screen as shown in Figure 1 1 appears, select GIGABYTE GBB36X Controller and click Next . Step 4: After the driver is loaded, select the RAID/AHCI drive(s) where you want to install the operating system and then click Next to continue the OS installation (Figure 12).
Appendix - 112 - Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. 3. Reset Disks to Non-RAID 4. Exit RAID V olumes : Nonedened. Physical Disks : Port Drive Model Serial # Size T ype/Status(V ol ID) 0 ST3120026AS 3JT354CP 1 11.
- 1 13 - Appendix • Performing the Rebuild in the Operating System While in the operating system, make sure the chipset driver has been installed from the motherboard driver disk. Then launch the Intel Matrix Storage Console from All Programs in the Start menu.
Appendix - 114 - • Restoring the Master Drive to a Previous State (for Recovery V olume only) When two hard drives are set to Recovery V olume in Update on Request mode, you can restore the master drive data to the last backup state when needed.
- 1 15 - Appendix For the JMicron JMB362/GIGABYTE SA TA2: Turn off your computer and replace the failed hard drive with a new one. Use either the RAID setup utility or the GIGABYTE RAID CONFIGURER utility in the operating system to perform the rebuild.
Appendix - 116 - • Rebuilding in the operating system Make sure the JMicron JMB362/GIGABYTE SA TA2 SA T A controller driver has been installed from the moth- erboard driver disk. Launch the GIGABYTE RAID CONFIGURER from All Programs in the Start menu.
- 1 17 - Appendix For the Marvell 9128: Turn off your computer and replace the failed hard drive with a new one. Please note to perform the rebuild, you must enter the GSA T A RAID Conguration menu in BIOS Setup. Step 1: After the system starts, enter the BIOS Setup program and go to Integrated Peripherals .
Appendix - 118 - Step 3: The BGA Rebuild item in the Information block will display the current rebuild progress. After the rebuild is complete, the Status will display as Functional . Please note the rebuild will be stopped if you exit the rebuild screen before the rebuild is complete.
- 1 19 - Appendix 5-2-1 Conguring 2/4/5.1/7.1-Channel Audio The motherboard provides six audio jacks on the back pan el w hic h su pp ort 2/4 /5. 1/7 .
Appendix - 120 - Step 2: Connect an audio device to an audio jack. The The cur- rent connected device is dialog box appears. Select the device according to the type of device you connect. Then click OK . Step 3: On the Speakers scre en, cli ck the Speak er Con gura - tion tab.
- 121 - Appendix 5-2-2 Conguring S/PDIF In/Out A. S/PDIF In The S/PDIF In cable (optional) allows you to input digital audio signals to the computer for audio processing. 1. Installing the S/PDIF In Cable: 2. Conguring S/PDIF In: On the Digital Input screen, click the Default Format tab to select the default format.
Appendix - 122 - B. S/PDIF Out The S/PDIF Out jacks can transmit audio signals to an external decoder for decoding to get the best audio quality . 1. Connecting a S/PDIF Out Cable: 2. Conguring S/PDIF Out: On the Digital Output(Optical) screen (Note) , click the Default Format tab and then select the sample rate and bit depth.
- 123 - Appendix 5-2-3 Enabling the Dolby Home Theater Function Before Dolby Ho me T heater is enabl ed, you get onl y 2-cha nnel pla yback o utput (f rom the front speakers) when playing 2-channel stereo sources. Y ou must play 4-, 5.1-, or 7.1- chan- nel content to get 4-, 5.
Appendix - 124 - 5-2-4 Conguring Microphone Recording Step 1: After installing the audio driver , the HD Audio Manager icon willappearinthenotication area.
- 125 - Appendix Step 4: T o ra i s e t he re c or d i ng an d p l ay b a ck vo l um e f o r t h e microphone, click the Microphone Boost icon on the right of the Recording V o lume slider and set the Microphone Boost level.
Appendix - 126 - Step 3: When the Stereo Mix item appears, right-click on this item and select Enable . Then set it as the default de- vice. Step 4: Now you can access the HD Audio Manager tocong - ure Stereo Mix and use Sound Recorder to record the sound.
- 127 - Appendix 5-3 T roubleshooting 5-3-1 Frequently Asked Questions T o read more FAQs for your motherboard, please go to the Support&DownloadsMotherboardF AQ page on GIGABYTE's website. Q: In the BIOS Setup program, why are some BIOS options missing? A: Some advanced options are hidden in the BIOS Setup program.
Appendix - 128 - 5-3-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. ST ART A Turn off the power. Remove all peripherals, connecting cables, and power cord etc.
- 129 - Appendix If th e pro cedur e abov e is u nable to so lve y our pr oblem , con tact t he pl ace of purc hase or loc al dealer for help. Or go to the Support&DownloadsT echnical Service Zone page to submit your question. Our customer service staff will reply you as soon as possible.
Appendix - 130 - 5-4 Regulatory Statements Regulatory Notices This document must not be copied without ou r written permission, and the c ontents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
- 131 - Appendix Finally , we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly.
Appendix - 132 -.
- 133 - Appendix.
Appendix - 134 -.
- 135 - Appendix Contact Us • GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei 231, T aiwan TEL: +886-2-8912-4000 F AX: +886-2-8912-4003 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www .
Appendix - 136 - • G.B.T . TECHNOLOGY TRADING GMBH - Germany WEB address : http://www .gigabyte.de • G.B.T . TECH. CO., L TD. - U.K. WEB address : http://www .giga-byte.co.uk • Giga-Byte T echnology B.V . - The Netherlands WEB address : http://www .
An important point after buying a device Gigabyte GA-X58A-UD3R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gigabyte GA-X58A-UD3R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gigabyte GA-X58A-UD3R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gigabyte GA-X58A-UD3R you will learn all the available features of the product, as well as information on its operation. The information that you get Gigabyte GA-X58A-UD3R will certainly help you make a decision on the purchase.
If you already are a holder of Gigabyte GA-X58A-UD3R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gigabyte GA-X58A-UD3R.
However, one of the most important roles played by the user manual is to help in solving problems with Gigabyte GA-X58A-UD3R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gigabyte GA-X58A-UD3R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
