Instruction/ maintenance manual of the product UMTK27 Amana
Go to page of 2
Proper installation is the installer's responsibility! Write the model & serial numbers on the owner's manual. The model number label is located on the oven front.
1. "SET" installment in Bracket Base 3. Fixing 'location screw' in cabinet 5. Installment of Bracket Bottom 7. Installment of Trim Frame Remove 4 screws from the lower right and left parts of outer panel, place "SET" in Bracket Base and fix it by tightening 4 screws again.
An important point after buying a device Amana UMTK27 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Amana UMTK27 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Amana UMTK27 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Amana UMTK27 you will learn all the available features of the product, as well as information on its operation. The information that you get Amana UMTK27 will certainly help you make a decision on the purchase.
If you already are a holder of Amana UMTK27, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Amana UMTK27.
However, one of the most important roles played by the user manual is to help in solving problems with Amana UMTK27. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Amana UMTK27 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
