Gigabyte GA-F2A88XM-D3H Motherboard manual

Summary of contents each page of manual

Page 1

GA-F2A88XM-D3H User's Manual Rev . 30 01 1 2ME -F288M3H-300 1R.
Page 2

Motherboard GA-F2A88XM-D3H Aug. 19, 2013 Aug. 19, 2013 Motherboard GA-F2A88XM-D3H.
Page 3

Copyright © 2013 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Page 4

- 4 - T able of Contents Box Contents ................................................................................................................... 6 Optional Items ................................................................................
Page 5

- 5 - Chapter 4 Drivers Installation ........................................................................................ 69 4-1 Installing Chipset Drivers ............................................................................... 69 4-2 Application Software .
Page 6

- 6 - Box Contents 5 GA-F2A88XM-D3H motherboard 5 Motherboard driver disk 5 User's Manual 5 Quick Installation Guide 5 Four SA T A cables 5 I/O Shield Optional Items  2-portUSB2.0bracket(PartNo.12CR1-1UB030-6*R)  eSA T A bracket(PartNo.
Page 7

- 7 - GA-F2A88XM-D3H Motherboard Layout KB_MS_USB CPU_F AN SYS_F AN1 Socket FM2+ AT X F_USB30 AUDIO DDR3_4 DDR3_2 DDR3_3 DDR3_1 B AT A TX_12V AMD A88X CODEC CLR_CMOS M_BIOS B_BIOS DVI_VGA USB_LAN Real.
Page 8

- 8 - GA-F2A88XM-D3H Motherboard Block Diagram Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications." AMD APU UMI APUCLK+/-(100MHz) Dual Channel Memory PCI Express Bus PCI Express Bus COM LPC Bus 1 PCI PCI Bus Dual BIOS PCI CLK (33MHz) PCIe CLK (100MHz) PS/2 KB/Mouse 8 USB 2.
Page 9

- 9 - Hardware Installation 1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damagedas aresultof electrostaticdischarge (ESD).
Page 10

- 10 - Hardware Installation 1-2 ProductSpecications APU  FM2+ Socket: - AMD A series processors - AMD Athlon ™ series processors ( Go to GIGABYTE's website for the latest CPU support list.
Page 11

- 1 1 - Hardware Installation Storage Interface  Chipset: 8 x SA T A 6Gb/s connectors - Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD USB  Chipset: - 4 USB 3.0/2.0 ports ( 2 ports on the back panel, 2 ports available through the internal USB header ) - 8 USB 2.
Page 12

- 12 - Hardware Installation Unique Features  Support for @BIOS  Support for Q-Flash  Support for Xpress Install  Support for EasyTune * Available functions in EasyTune may differ by motherboard model.
Page 13

- 13 - Hardware Installation 1-3 Installing the APU and APU Cooler 1-3-1 Installing the APU A. Locatethepinone(denotedbyasmalltriangle)ofthe APUsocketandthe APU. Read the following guidelines before you begin to install the APU: • Make sure that the motherboard supports the APU.
Page 14

- 14 - Hardware Installation B. Follow the steps below to correctly install the APU into the motherboard APU socket. • Before installing the APU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the APU.
Page 15

- 15 - Hardware Installation 1-3-2 Installing the CPU Cooler Follow the steps below to correctly install the APU cooler on the motherboard. Use extreme care when removing the APU cooler because the thermal grease/tape between the APU cooler and APU may adhere to the APU.
Page 16

- 16 - Hardware Installation 1-4 Installing the Memory Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory . It is recommended that memory of the same capacity , brand, speed, and chips be used.
Page 17

- 17 - Hardware Installation 1-4-2 Installing a Memory Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs.
Page 18

- 18 - Hardware Installation 1-5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card.
Page 19

- 19 - Hardware Installation 1-6 Setupofthe AMDDualGraphicsConguration Combining the onboard GPU with a discrete graphics card, AMD's Dual Graphics technology can provide signicantlyadvanceddisplayperformanceforAMDplatform.
Page 20

- 20 - Hardware Installation 1-7 Back Panel Connectors USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as a USB keyboard/mouse,USBprinter ,USBashdriveandetc.
Page 21

- 21 - Hardware Installation Optical S/PDIF Out Connector This connector provides digital audio out to an external audio system that supports digital optical audio. Before using this feature, ensure that your audio system provides an optical digital audio in connector .
Page 22

- 22 - Hardware Installation 1-8 Internal Connectors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer .
Page 23

- 23 - Hardware Installation 1/2) A TX_12V/A TX (2x4 12V Power Connector and 2x12 Main Power Connector)  With the use of the power connector , the power supply can supply enough stable power to all the components onthe motherboard.
Page 24

- 24 - Hardware Installation • Be sure to connect fan cables to the fan headers to prevent your APU and system from overheating. Overheating may result in damage to the APU or the system may hang. • These fan headersare not conguration jumper blocks.
Page 25

- 25 - Hardware Installation 6) SA T A3 0/1/2/3/4/5/6/7 (SA T A 6Gb/s Connectors) The SA T A connectors conform to SA T A 6Gb/s standard and are compatible with SA T A 3Gb/s and SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device.
Page 26

- 26 - Hardware Installation 8) F_P ANEL (Front Panel Header) Connect the power switch, reset switch, speaker , chassis intrusion switch/sensor and system status indicator onthe chassistothisheader accordingtothe pinassignmentsbelow .
Page 27

- 27 - Hardware Installation 9) F_AUDIO (Front Panel Audio Header)  The frontpanel audio headersupports IntelHigh Denitionaudio (HD)and AC'97audio. Y oumay connect your chassis front panel audio module to this header .
Page 28

- 28 - Hardware Installation 12) F_USB1/F_USB2 (USB 2.0/1.1 Headers)  Theheadersconform toUSB 2.0/1.1 specication.Each USBheader canprovide twoUSB portsvia an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer .
Page 29

- 29 - Hardware Installation 13) COM (Serial Port Header) The COM header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer .
Page 30

- 30 - Hardware Installation 20 19 2 1 F_USB30 F_AUDIO(H) DB_PORT F_ PA NEL(NH) F_ PA NEL (H61M-D2) ACPI_CPT (GA-IVB) BIOS_PH (GA-IVB) SMB_CPT (GA-IVB) CLR_CMOS CI DIS_ME GP15_CPT (GA-IVB) XDP_CPU XDP.
Page 31

- 31 - BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard.
Page 32

BIOS Setup - 32 - 2-1 Startup Screen The following startup Logo screen will appear when the computer boots. FunctionKeys: <DEL>:BIOSSETUPQ-FLASH  Pressthe<Delete>keytoenterBIOSSetuportoaccesstheQ-FlashutilityinBIOSSetup.
Page 33

- 33 - BIOS Setup 2-2 The Main Menu Onthemain menuoftheBIOS Setupprogram,pressarrow keystomoveamong theitemsandpress<Enter> to accept or enter a sub-menu. Or you can use your mouse to select the item you want.
Page 34

BIOS Setup - 34 - BIOS Setup Menus  M.I.T .  Use thismenu tocongure theclock, frequency , andvoltagesof yourCPU and memory ,etc. Orcheck the system/CPU temperatures, voltages, and fan speeds.
Page 35

- 35 - BIOS Setup 2-3 M.I.T . Whetherthesystemwill workstablywiththeoverclock/overvoltage settingsyoumadeis dependent onyouroverallsystem congurations.
Page 36

BIOS Setup - 36 - ` M.I.T . Current Status This screen provides information on CPU/memory frequencies/parameters. ` Advanced Frequency Settings & BCLK/PCIe Clock Control  Allowsyou tomanually setthe CPU baseclock andPCIe bus frequencyin 1 MHzincrements.
Page 37

- 37 - BIOS Setup (Note) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature. & CPU Clock Ratio, CPU Frequency The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu.
Page 38

BIOS Setup - 38 - & CPU Core Control Allows you to determine whether to manually enable/disable CPU cores. Automatic mode allows the BIOS toenable allCPUcores (numberof coresavailabledepends ontheCPU beingused).
Page 39

- 39 - BIOS Setup ` Advanced Memory Settings & ExtremeMemoryProle(X.M.P .) (Note) , System Memory Multiplier , Memory Frequency(MHz) The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu.
Page 40

BIOS Setup - 40 - This sub-menu provides memory timing settings for each channel of memory . The respective timing setting screensare congurableonlywhen DRAM Timing Selectable is set to Q uick or Expert .Note:Y oursystem may become unstable or fail to boot after you make changes on the memory timings.
Page 41

- 41 - BIOS Setup ` PC Health Status & Reset Case Open Status  Disabled Keepsorclearstherecordofpreviouschassisintrusionstatus.(Default)  Enabled Clears the record of previous chassis intrusion status and the Case Open  eld will show "No"atnextboot.
Page 42

BIOS Setup - 42 - & CPU Vcore/Dram V oltage/+3.3V/+5V/+12V Displays the current system voltages. & CPU/System T emperature Displays current CPU/system temperature. & CPU/System Fan Speed Displays current CPU/system fan speeds. & CPU W arning T emperature  Sets thewarning thresholdfor CPUtemperature.
Page 43

- 43 - BIOS Setup 2-4 System Information This section provides information on your motherboard model and BIOS version. Y ou can also select the default language used by the BIOS and manually set the system time. & System Language Selects the default language used by the BIOS.
Page 44

BIOS Setup - 44 - 2-5 BIOS Features & Boot Option Priorities  Speciesthe overall boot order from the available devices. For example, you can set hard drive as the rstpriority( Boot Option #1 )andDVDROMdriveas thesecondpriority( Boot Option #2 ).
Page 45

- 45 - BIOS Setup & OS T ype  Allowsyoutoselecttheoperatingsystemtobeinstalled.(Default:OtherOS) & CSM Support  EnablesordisablesUEFICSM(CompatibilitySupportModule)tosupportalegacyPCbootprocess.
Page 46

BIOS Setup - 46 - & User Password  Allowsyoutocongure auserpassword.Press<Enter>onthis item,typethepassword,andthenpress <Enter>. Y ou will be requested to conrm the password.
Page 47

- 47 - BIOS Setup 2-6 Peripherals & IOMMU  Enablesordisables AMDIOMMUsupport.(Default:Disabled) & OnChip SA T A Channel  EnablesordisablestheintegratedSA T A controllers.
Page 48

BIOS Setup - 48 - & Legacy USB Support  AllowsUSBkeyboard/mousetobeusedinMS-DOS.(Default:Enabled) & XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support.
Page 49

- 49 - BIOS Setup  SB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the SouthBridgeastherstdisplay .
Page 50

BIOS Setup - 50 - ` SuperIOConguration  This section provides information on the super I/O chip and allows you to congure the serial port and parallel port. & Serial Port A  Enablesordisablestheonboardserialport.
Page 51

- 51 - BIOS Setup 2-7 Power Management (Note) SupportedonWindows8/7operatingsystemonly . & Resume by Alarm  Determineswhethertopoweronthesystematadesiredtime.
Page 52

BIOS Setup - 52 - & Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up event.  Note:T ousethisfunction,youneedan A TXpowersupplyprovidingatleast1A onthe+5VSBlead.
Page 53

- 53 - BIOS Setup 2-8 Save & Exit & Save & Exit Setup  Press <Enter>on thisitem and select Yes . This saves the changes to the CMOS and exits the BIOS Setup program. Select No orpress<Esc>toreturntotheBIOSSetupMainMenu.
Page 54

BIOS Setup - 54 -.
Page 55

- 55 - Conguring SA T A Hard Drive(s) Chapter3 ConguringSA T A HardDrive(s) (Note1) SkipthisstepifyoudonotwanttocreateRAIDarrayontheSA T Acontroller . (Note2) RequiredwhentheSA T Acontrollerissetto AHCIorRAIDmode.
Page 56

Conguring SA T A Hard Drive(s) - 56 - Step 2: Ifyou wantto congureUEFI RAID,follow thestepsin "C-1." T oenter thelegacyRAID ROM,save thesettings and exit BIOS Setup. Refer to "C-2" for more information.
Page 57

- 57 - Conguring SA T A Hard Drive(s) C-1.UEFIRAIDConguration ThismodesupportsWindows864-bitinstallationonly . T o congure UEFI RAID, you need .
Page 58

Conguring SA T A Hard Drive(s) - 58 - Figure 5 Creating a RAID Array T o create a RAID array , refer to the following examples to enter the commands and press <Enter>. When succeeded, the message which says "created sucessfully" will appear .
Page 59

- 59 - Conguring SA T A Hard Drive(s) T oexittheUEFIRAIDutility ,enter"exit"andpress<Enter>. Deleting an Array T odeleteanarray ,enterthefollowingcommandsandpress<Enter>.
Page 60

Conguring SA T A Hard Drive(s) - 60 - C-2.ConguringLegacyRAIDROM Enter the legacy RAIDBIOS setup utility to congure a RAID array .Skip this step and proceed with the installation  ofWindowsoperatingsystemforanon-RAIDconguration.
Page 61

- 61 - Conguring SA T A Hard Drive(s) First, select a RAIDmode and press<Enter>. The selections available dependon the numberof thehard drives being installed. Then follow the on-screen instructions to specifythe array size.
Page 62

Conguring SA T A Hard Drive(s) - 62 - Figure 12 AMD-RAID Array Conguration (Build: 6.1.1-00075) Arrays Create Array < h >< i >< f >< g >=Choose, <Esc>=Back <Ente.
Page 63

- 63 - Conguring SA T A Hard Drive(s) Deleting an Array The Delete Array(s) menu option allows for deletion of disk array assignments. 1. Select Delete Array(s) in the Main Menu andpress<Enter>.
Page 64

Conguring SA T A Hard Drive(s) - 64 - 3-2 Installing the SA T A RAID/AHCI Driver and Operating System WiththecorrectBIOSsettings,youarereadytoinstalltheoperatingsystem. A. Installing Windows 8/7 (ThefollowinginstructionsuseWindows8astheexampleoperatingsystem.
Page 65

- 65 - Conguring SA T A Hard Drive(s) Figure 2 B. Installing Windows XP (32-bit) Before installing WindowsXP , connect aUSB oppy disk drive to yourcomputer.
Page 66

Conguring SA T A Hard Drive(s) - 66 - Figure 3 RefertothefollowingforinstallingthedriverduringtheWindowssetupprocess.
Page 67

- 67 - Conguring SA T A Hard Drive(s) RebuildinganArray: Rebuilding is the process of restoring data to a hard drive from other drives in the array . Rebuilding applies only to fault-tolerant arrays such as RAID 1, RAID 5, and RAID 10 arrays.
Page 68

Conguring SA T A Hard Drive(s) - 68 -.
Page 69

- 69 - Drivers Installation Chapter 4 Drivers Installation 4-1 Installing Chipset Drivers • Before installing the drivers, rst install the operating system. (The following instructions use Windows8astheexampleoperatingsystem.
Page 70

Drivers Installation - 70 - 4-2 Application Software This page displays all the utilities and applications that GIGABYTE develops and some free software. Y ou can click the Install button on the right of an item to install it. 4-3 T echnical Manuals This page provides the content descriptions for this driver disk.
Page 71

- 71 - Drivers Installation 4-4 Contact For thedetailed contact informationof the GIGABYTET aiwan headquarter orworldwide branch ofces,click the URL on this page to link to the GIGABYTE website. 4-5 System This page provides the basic system information.
Page 72

Drivers Installation - 72 - 4-6 Download Center T o update the BIOS, drivers, or applications, click the Download Center button to link to the GIGABYTE website.
Page 73

- 73 - Unique Features 5-1 BIOS Update Utilities GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash ™ and @BIOS ™ . GIGABYTE Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS mode.
Page 74

Unique Features - 74 - Q-Flash Utility v1.05 Model Name : F2A88XM-D3H BIOS V ersion : E4 BIOS Date : 08/08/2013 Flash T ype/Size : MXIC 25L6465E/6406E 8MB Update BIOS From Drive Save BIOS to Drive Return to BIOS setup Select Device USB Flash Drive B.
Page 75

- 75 - Unique Features Step 4: DuringthePOST , press<Delete>toenterBIOSSetup. Select Load Optimized Defaults on the Save & Exit screen and press <Enter> to load BIOSdefaults.
Page 76

Unique Features - 76 - 5-1-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin 1. In Windows,closeallapplicationsandTSR(T erminateand StayResident)programs.Thishelpsprevent unexpected failures when performing a BIOS update.
Page 77

- 77 - Unique Features 5-2 EasyT une 6 GIGABYTE's EasyT une 6 is a simple and easy-to-use interface that allows users to ne-tune their system settings or do overclock/overvoltage in Windows environment.
Page 78

Unique Features - 78 - 5-3 Smart Recovery 2 SmartRecovery2 allowsyoutoback upapartitionasan imageleeveryhour.Y oucanusethese imagesto restoreyoursystemorleswhenneeded.
Page 79

- 79 - Unique Features Recovering your system with Smart Recovery 2 (Windows 8/7 only): Steps: 1. Click the File Recovery button on the main menu. 2. Select the location where your backup is saved. 3. Use the time slider to select a time point.
Page 80

Unique Features - 80 -.
Page 81

- 81 - Appendix 6-1 Conguring AudioInputandOutput Chapter 6 Appendix HighDenitionAudio(HD Audio) HD Audioincludesmultiple highqualitydigital-to-analogconverters (DACs).
Page 82

Appendix - 82 - The pictures to the right show the 7.1-channel speaker congurations. 7.1-Channel Speakers: Center/Subwoofer Speaker Out Front Speaker Out Rear Speaker Out Side Speaker Out Step 2: Connect an audio device to an audio jack. The The current connected device is dialog box appears.
Page 83

- 83 - Appendix If your chassis provides an AC'97 front panel audio module, to activate the AC'97 functionality , click the tool icon on the Speaker Conguration tab. On the Connector Settings dialog box, select the Disable front panel jack detection check box.
Page 84

Appendix - 84 - 6-1-2 ConguringS/PDIFOut The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio quality .
Page 85

- 85 - Appendix 6-1-3 ConguringMicrophoneRecording Step 2: Connectyour microphoneto theMic injack (pink)on the back panel or the Mic in jack (pink) on the front panel. Thencongurethejackformicrophonefunctionality .
Page 86

Appendix - 86 - Step 5: T o open the Sounder Recorder , move the mouse cursor to the bottom left corner of the screen, click the Start icon to switch to the Start screen (orpressthe Windows button on the keyboard).
Page 87

- 87 - Appendix 6-1-4 Using the Sound Recorder A. Recording Sound 1. Makesureyouhaveconnectedthesoundinputdevice(e.g.microphone)tothecomputer. 2. T o record the audio, click the Start Recording button . 3. T o stop recording audio, click the Stop Recording button .
Page 88

Appendix - 88 - 6-2 T roubleshooting 6-2-1 Frequently AskedQuestions T o read more F AQs for your motherboard, please go to the Support& DownloadsF AQ page on GIGABYTE's website.
Page 89

- 89 - Appendix 6-2-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. ST ART A Turn of f the power. Remove all peripherals, connecting cables, and power cord etc.
Page 90

Appendix - 90 - If the procedure above is unable to solve your problem, contact the place of purchase or local dealer for help. Or go to the Support & DownloadsT echnical Support page to submit your question. Our customer service staff will reply you as soon as possible.
Page 91

- 91 - Appendix Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a thirdparty norbe usedfor anyunauthorized purpose.
Page 92

Appendix - 92 -.
Page 93

- 93 - Appendix.
Page 94

Appendix - 94 -.
Page 95

- 95 - Appendix Contact Us • GIGA-BYTE TECHNOLOGY CO., L TD. Address:No.6,BaoChiangRoad,Hsin-TienDist., NewT aipeiCity231,T aiwan TEL: +886-2-8912-4000 F AX: +886-2-8912-4005 T ech.andNon-T ech.Support(Sales/Marketing): http://ggts.
Page 96

Appendix - 96 - • GIGABYTE Global Service System T osubmit a technicalor non-technical(Sales/Marketing) question, please link to: http://ggts.gigabyte.com.tw Then select your language to enter the system. • G.B.T . TECHNOLOGY TRADING GMBH - Germany WEBaddress:http://www .

Read the Gigabyte GA-F2A88XM-D3H manual - avoid problems

An important point after buying a device Gigabyte GA-F2A88XM-D3H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:

to know how to properly use the device
to know how to perform maintenance/ periodic checks of correct operation of the product Gigabyte GA-F2A88XM-D3H
to know what to do in case of failure Gigabyte GA-F2A88XM-D3H

If you have not bought Gigabyte GA-F2A88XM-D3H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gigabyte GA-F2A88XM-D3H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gigabyte GA-F2A88XM-D3H you will learn all the available features of the product, as well as information on its operation. The information that you get Gigabyte GA-F2A88XM-D3H will certainly help you make a decision on the purchase.

If you already are a holder of Gigabyte GA-F2A88XM-D3H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gigabyte GA-F2A88XM-D3H.

However, one of the most important roles played by the user manual is to help in solving problems with Gigabyte GA-F2A88XM-D3H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gigabyte GA-F2A88XM-D3H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center

Gigabyte GA-F2A88XM-D3H manual

Share URL

Similar manuals

Share URL

Similar manuals

Summary of contents each page of manual

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

Page 8

Page 9

Page 10

Page 11

Page 12

Page 13

Page 14

Page 15

Page 16

Page 17

Page 18

Page 19

Page 20

Page 21

Page 22

Page 23

Page 24

Page 25

Page 26

Page 27

Page 28

Page 29

Page 30

Page 31

Page 32

Page 33

Page 34

Page 35

Page 36

Page 37

Page 38

Page 39

Page 40

Page 41

Page 42

Page 43

Page 44

Page 45

Page 46

Page 47

Page 48

Page 49

Page 50

Page 51

Page 52

Page 53

Page 54

Page 55

Page 56

Page 57

Page 58

Page 59

Page 60

Page 61

Page 62

Page 63

Page 64

Page 65

Page 66

Page 67

Page 68

Page 69

Page 70

Page 71

Page 72

Page 73

Page 74