Instruction/ maintenance manual of the product GA-6KIEH-RH Gigabyte
Go to page of 58
USER’S MANUAL GA-6KIEH-RH/GA-6KIEL-RH Intel ® mini-ITX Motherboard Intel ® mini-ITX Motherboard Rev. 1001 * The WEEE marking on the product indicates this product must not be disposed of with user.
2 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Copyright © 2007 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte.
English 3 T able of Content T able of Content Item Checklist ........................................................................................ 5 Chapter 1 Introduction ............................................................................
4 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Security ...................................................................................................... 4 9 TPM State .......................................................................................
5 Introduction The GA-6KIEH-RH motherboard Serial A T A cable x 2 I/O Shield Kit The GA-6KIEL-RH motherboard IDE (A T A100 ) cable x 1 CD for motherboard driver & utility .
6 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Chapter 1 Introduction 1 -1 Considerations Prior to Installation Preparing Y our Computer The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD).
7 Introduction 1.2 Features Summary Form Factor y 170mm x 170mm Mini ITX form factor, 8 layers PCB. CPU y Supports single Intel ® Merom/Penryn/Celeron M550 series processor (GA-6KIEH-RH) y Socket P w.
8 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Rear Panel I/O y 1 x SPDIF Out (Coaxial) y 1 x YPbPr prot (HDTV out ) y 1 x HDMI prot** y 1 x VGA port y 1 x DVI-D port** y 4 x USB 2.0 ports y 2 x LAN RJ45 ports (GA-6KIEH-RH) y 1 x LAN RJ45 port (GA-6KIEL-RH) y 1 HD Audio jacks (Line-out / MIC-in / Line-in) can configure 5.
9 Introduction 1.3 Motherboard Components (GA-6KIEH-RH) CPU Intel GME965 Intel 82573L GbE Intel ICH8M Silicon Image SiI1392 Intel 82566DC GbE COM1 COM2 F_AUDIO1 Mini PCI PCI 32/33MHz Mini PCI-E DDRII .
10 GA-6KIEH-RH/GA-6KIEL-RH Motherboard CPU Intel GLE960 Intel ICH8M Silicon Image SiI1392 Intel 82566DC GbE COM1 COM2 F_AUDIO1 Mini PCI PCI 32/33MHz Mini PCI-E DDRII 1 DDRII 2 A TX Power F_Panel Battery USB USB LAN VGA DVI-D HDMI SPDIF YPbPr Relteak ALC883 SA T A1 SA T A2 SA T A5 CPU Fan SYS Fan F_USB1 F_USB2 IDE1 1.
11 Hardware Installation Process Chapter 2 Hardware Installation Process 2-1: Installing Processor Step 1 The processor socket come with a screw to secure the processor. Insert the CPU into the socket by making sure the notch on the corner of the CPU corresponds with the notch on the inside of the socket.
12 GA-6KIEH-RH/GA-6KIEL-RH Motherboard 2-2: Installing Processor Colling Fan ! ! W ARNING! T o prevent the CPU overheat, please make sure you have apply the CPU cooler paste on the surface of installed CPU Step 1 Attach the heat sink n the procssor socket.
13 Hardware Installation Process 2-3: Install Memory Modules The motherboard supports DDR2 memory module, whereby BIOS will automatically detect memory capacity and specifications. The memory module only can be inserted in one direction. Before installing the memory modules, please comply with the following conditions: 1.
14 GA-6KIEH-RH/GA-6KIEL-RH Motherboard T able 1. Supported DIMM Module T ype (GA-6KIEH-RH) T able 2. Supported DIMM Module T ype (GA-6KIEL-RH) Size Organization RAM Chips/DIMM 256MB 8MB x 8 x 4 bks 8 .
15 Hardware Installation Process 2-4: Connect ribbon cables, cabinet wires, and power supply 2-4-1 : I/O Back Panel Introduction (GA-6KIEH-RH).
16 GA-6KIEH-RH/GA-6KIEL-RH Motherboard 2-4-2 : I/O Back Panel Introduction (GA-6KIEL-RH).
17 Hardware Installation Process / / YPbPr Ports The "Y," "Pb" and "Pr" are sets of three inputs or outputs on better video equipment and TVs. Blue port represents Pb port, Red represnts Pr port, and Green represent Y port.
18 GA-6KIEH-RH/GA-6KIEL-RH Motherboard In Windows Vista, select Start>Control Panel>Sound, select Realtek HDMI Output and then click Set Default. VGA Port Connect the monitor cable to this port. DVI-D Port The DVI-D port supports DVI-D specifictation.
19 Hardware Installation Process LAN LED Description LED1 (Green) LED2 (Green/Y ellow) Color Condition Description Green O N LAN Link / no Access Green BLINK LAN Access - O F F Idle - OF F 10Mbps conn.
20 GA-6KIEH-RH/GA-6KIEL-RH Motherboard 2-5: Connectors Introduction & Jumper Setting 1. A T X 1 12. F_AUDIO1 2. IDE1 (IDE cable connector) 13. BA T1 (Battery) 3. SA T A1 (SiI31 14 SA T A cable connector) 14. CPU_F AN1 4. SA T A2 (SiI31 14 SA T A cable connector) 15.
21 Connector Introduction 1) A TX1 (Auxuliary power connector) AC power cord should only be connected to your power supply unit after A TX power cable and other related devices are firmly connected to the mainboard. Pin No. Definition 1 3.3V 2 3.3V 3 GND 4 VCC 5 GND 6 VCC 7 GND 8 Power Good 9 5V SB(stand by +5V) 10 +12V 11 3.
22 GA-6KIEH-RH/GA-6KIEL-RH Motherboard SA T A 3Gb/s can provide up to 300MB/s stransfer rate. Please refer to the BIOS setting for the SA T A 3Gb/s and install the proper driver in order to work properly . 3/ 4/ 5/ 6/ 7 ) SA T A 1~5 (Serial A T A cable connectors) Pin No.
23 Connector Introduction Be careful with the polarity of the front USB connector. Check the pin assignment carefully while you connect the front USB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it.
24 GA-6KIEH-RH/GA-6KIEL-RH Motherboard 14/15 ) CPU_F AN1/SYS_FAN1 (CPU fan/System fan cable connectors) 1 Pin No. Definition 1 GND 2 12V 3 Sense 4 Control The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(CPU_F AN) power connector and possesses a foolproof connection design.
25 Connector Introduction 16 ) F_Panel (2X10 Pins Front Panel connector) Please connect the power LED, PC speaker, reset switch and power switch of your chassis front panel to the F_P ANEL connector according to the pin assignment above. 20 19 2 1 Pin No.
26 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Y ou may clear the CMOS data to restore its default values by this jumper . Default value doesn’t include the “Shunter” to prevent from improper use this jumper.
Block Diagram 27 2-6: Block Diagram CPU Intel Merom NB Intel GME965 SB Intel ICH8-M S I/O ITE IT8718F CPU FAN SYS FAN Hardware Monitor Circuits P A T A HDD Connector CF Card Connector PATA SA T A 1 SA T A 2 SA T A 5 SA T A 3 SA T A 4 USB2.
28 GA-6KIEH-RH/GA-6KIEL-RH Motherboard < Ç > Move to previous item < È > Move to next item < Å > Move to the item in the left hand < Æ > Move to the item in the right hand .
29 BIOS Setup z z z z z Main This setup page includes all the items in standard compatible BIOS. z z z z z Adva nced This setup page includes all the items of Phoenix BIOS special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters.
30 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Syste m Ti me The time is calculated based on the 24-hour military time clock. Set the System Time (HH:MM:SS) System Time Set the System Date. Note that the “Day” automatically changed after you set the date.
31 BIOS Setup IDE Cha nnel 0 Ma ster/Slave/SA T A Port 1/2/3 The category identifies the types of Serial SA T A hard disk from drive 1 to 6 that has been installed in the computer. System will automatically detect HDD type. Note that the specifications of your drive must match with the drive table.
32 GA-6KIEH-RH/GA-6KIEL-RH Motherboard installed Halt On The category determines whether the computer will stop if an error is detected during power up. No Errors The system boot will not stop for any error that may be detected and you will be prompted.
33 BIOS Setup Figure 2: Advanced Adva nced About This Section: Advanced With this section, allowing user to configure your system for advanced operation. User can set the CPU Features, GM965 Features, ICH8MD0 Features, Super I/O Features, Power Features and Hardware Monitor Features.
34 GA-6KIEH-RH/GA-6KIEL-RH Motherboard System Information Figure 2-1: System Information System Information This category includes the information of BIOS V ersion, Product Name, BIOS Build Date, CPU T ype, CPU Speed, numberof processor installed, Memory DIMM1/ DIMM2, LAN1/LAN2 MAC Address, and GBIA Module V ersion.
35 BIOS Setup CPU Feature Figure 2-2: CPU Feature Ma nufa cturer This item displays the information of original CPU manufacturer. CPU T ype This item displays the information of installed CPU type. CPU Speed This item displays the information of CPU speed.
36 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Thermal Control Circuit Configure the thermal control circuit portion of thermal monitor features of the processor. Disabled Disable thermal control circuit function. TM1 Select TM1 as thermal control circuit function.
37 BIOS Setup GM965 Feature Figure 2-3: GM965 Feature IGD Boot T ype Select the Video Device that will be actived during POST. Options VBT Default, CRT, TV, EFP, CRT+EFP. IGD Device 2 Enable or disable the Internal Graphics Device by setting this item to desire value.
38 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Pre-Allocated Memory Size Select the amount of Pre-Allocated Graphics Memory for use by the internal grapphics device. 8M Select 8M as Pre-Allocated Graphics Memory for use by the internal grapphics device.(Defualt setting) 1M Select 1M as Pre-Allocated Graphics Memory for use by the internal grapphics device.
39 BIOS Setup ICH8MDO Feature Figure 2-4: ICH8MDO Feature ICH8M Sata Pata Control Sub-Menu Press [Enter] to configure advanced sub-menu for ICH8M Sata Pata Control options. ACHI Configuration Enabled Enable ACHI Configuration. Disabled Disable ACHI Configuration.
40 GA-6KIEH-RH/GA-6KIEL-RH Motherboard DFOROM (Robson) Support Set this item to enabled will reduce the time it takes for a system to power up, access programs, and write data to the hard drive . Enabled Enable DFOROM (Robson) Support. Disabled Disable DFOROM (Robson) Support.
41 BIOS Setup Enabled Enable onboard LAN1 PXE option ROM. (Default setting) Disabled Disable onboard LAN1 PXE option ROM. LAN2 Controller Enabled Enable onboard LAN2 controller function. (Default setting) Disabled Disable onboard LAN2 controller function.
42 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Super I/O Feature Figure 2-5:Super I/O Feature Serial Port A This allows users to configure serial prot A by using this option. Enabled Enabl e the configuration (Default setting) Disabled Disable the configuration.
43 BIOS Setup Serial Port B This allows users to configure serial prot B by using this option. Enabled Enabl e the configuration (Default setting) Disabled Disable the configuration. Base I/O address 3F8/IRQ4 Set IO address to 3F8/IRQ4. 2F8/IRQ3 Set IO address to 2F8/IRQ3.
44 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Disabled Console is connected via the modem. Continue C.R. after POST This option allows user to enable console redirection after O.S has loaded. On Enable console redirection after O.S has loaded. Off Disable this function.
45 BIOS Setup Power Feature Figure 2-6: Power Feature Disa ble ACPI Six Set the ACPI power state for your system. None Disable this function. (Default setting) S1 Set ACPI suspend type to S1 (Power On Suspend). S3 Set ACPI suspend type to S3(Suspend T o RAM).
46 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Power On System power state when AC cord is re-plugged. W ake Up by PME Enabled Enable PME as wake up function. (Default setting) Disabled Disable this function. Re sume On T ime On Enable alarm function to POWER ON system.
47 BIOS Setup Syste m T e mperature/CPU T emperatur e Detects and displays current system and CPU temperature automatically. CPU Fa n1/CASE Fa n 2 Detects and displays the current CPU/system fan speed status automatically CPU Vcore/P 1VB/3V Dual/P12V/P5V Detects and displays the current system's voltage status automatically.
48 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Quick Boot Mode Set this item to enable will allow to skip sertain tests suring booting. This will decrease the time needed to boot the system. Enabled Enable Quick Boot Mode. (Default setting) Disabled Disable Quick Boot Mode.
49 BIOS Setup Security Figure 3: Security Set Supervisor Password Y ou can install and change this options for the setup menus. T ype the password up to 6 characters in lengh and press <Enter>. The password typed now will clear any previously entered password from the CMOS memory .
50 GA-6KIEH-RH/GA-6KIEL-RH Motherboard T ype the password up to 6 characters in lengh and press <Enter>. The password typed now will clear any previously entered password from the CMOS memory . Y ou will be asked to confirm the entered password.
51 BIOS Setup TPM State Figure 4: TPM State Current TPM State Displays the current TPM State status. Cha nge TPM State No Change No configuration on TPM State. (Default setting) Enable & Activate Enable and activate TPM State. Deactivate & Disable Disable and deactivate TPM State.
52 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Boot Figure 5: Boot Boot Priority Order This field determines which type of device the system attempt to boot from after PhoenixBIOS Post completed. Specifies the boot sequence from the available devices. If the first device is not a bootable device, the system will seek for next available device.
53 BIOS Setup Exit Figure 6: Exit About This Section: Exit Once you have changed all of the set values in the BIOS setup menu, you should save your changes and exit BIOS setup program. Select “Exit” from the menu bar, to display the following sub-menu.
54 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Exit Saving Cha nge s This option allows user to exit system setup with saving the changes. Press <Enter> on this item to ask for the following confirmation message: Pressing ‘Y’ to store all the present setting values tha user made in this time into CMOS.
55 BIOS Setup Exit Discarding Cha nge s This option allows user to exit system setup without changing any previous settings values in CMOS. The previous selection remain in effect. This will exit the Setup Utility and restart your compuetr when selecting this option.
56 GA-6KIEH-RH/GA-6KIEL-RH Motherboard & & & & & Loa d Settup Default This option allows user to load default values for all setup items.
57 BIOS Setup Discard Cha nges This option allows user to load previos values from CMOS for all setup item. When you press <Enter> on this item, you will get a confirmation dialog box with a mes.
58 GA-6KIEH-RH/GA-6KIEL-RH Motherboard Save Cha nge s This option allows user to save setup dat ato CMOS. When you press <Enter> on this item, you will get a confirmation dialog box with a message as below: Press [Y es] to save setup daya to CMOS.
An important point after buying a device Gigabyte GA-6KIEH-RH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gigabyte GA-6KIEH-RH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gigabyte GA-6KIEH-RH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gigabyte GA-6KIEH-RH you will learn all the available features of the product, as well as information on its operation. The information that you get Gigabyte GA-6KIEH-RH will certainly help you make a decision on the purchase.
If you already are a holder of Gigabyte GA-6KIEH-RH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gigabyte GA-6KIEH-RH.
However, one of the most important roles played by the user manual is to help in solving problems with Gigabyte GA-6KIEH-RH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gigabyte GA-6KIEH-RH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
