Instruction/ maintenance manual of the product GA-5YXS-RH Gigabyte
Go to page of 54
USER’S MANUAL GA-5YXS1-RH/GA-5YXS-RH Xeon ® Processor Motherboard Xeon ® Processor Motherboard Rev. 1001 * The WEEE marking on the product indicates this product must not be disposed of with user&.
2 English GA-5YXS1-RH/GA-5YXS-RH Motherboard T able of Content Item Checklist ........................................................................................ 3 Chapter 1 Introduction ...........................................................
3 Introduction ; The GA-5YXS-RH motherboard (For GA-5YXS-RH) ; The GA-5YXS1-RH motherboard (For GA-5YXS1-RH) ; Serial A T A cable x 4 ; IDE (A T A133 ) cable x 1 / Floppy cable x 1 ; I/O Shield Kit ; .
4 English GA-5YXS1-RH/GA-5YXS-RH Motherboard Chapter 1 Introduction 1 - 1 Considerations Prior to Installation Preparing Y our Computer The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD).
5 Introduction 1 - 2 Features Summary Form Factor y 12” x 9.6” A TX form factor , 6 layers PCB. CPU y Supports single Intel ® Xeon ® processor y Intel Xeon ® Dual-Core/Quad-Core processor in LG.
6 English GA-5YXS1-RH/GA-5YXS-RH Motherboard T emperature, and /System T emperature values viewing y CPU/System Fan Revolution Detect y CPU shutdown when overheat On-Board LAN y Intel ® 82566DC &.
7 Introduction 1. C P U 22. PCI_1 slot(32bit/33MHz) 2. Intel 3200 23. PCI-E x8 slot 3. Intel ICH9R 24 . PCI-E x8 Slot (x1 bandwidth) 4. ITE IT8718F-S 25 . PCI-E x8 Slot (x1 bandwidth) 5. XGI V olari Z9s 26. IPMI BMC Module solt (optional) 6. V GA Memory 27.
8 English GA-5YXS1-RH/GA-5YXS-RH Motherboard 2 1 3 4 5 6 7 10 12 13 18 19 9 8 11 14 16 15 17 20 21 22 25 23 24 26 29 30 27 28 31 32 34 35 33 36 38 37 39 40 41 42 43.
9 Hardware Installation Process Chapter 2 Hardware Installation Process 2 - 1 Installing Processor and CPU Haet Sink Before installing the processor and cooling fan, adhere to the following cautions: 1. The processor will overheat without the heatsink and/or fan, resulting in permanent irreparable damage.
10 English GA-5YXS1-RH/GA-5YXS-RH Motherboard 2-1-2: Installing Cooling Fan Step 1 Attach the heat sink clip to the processor socket. Step 2 Place the cooling fan on the heat sink.
11 Hardware Installation Process 2 - 2 Install Memory Modules Before installing the memory modules, please comply with the following conditions: 1 . Please make sure that the memory used is supported by the motherboard. It is recommended that memory of similar capacity, specifications and brand be used.
12 English GA-5YXS1-RH/GA-5YXS-RH Motherboard Installation Steps: 1. Unlock a DIMM socket by pressing the retaining clips outwards.Aling a DIMM on the socket such that the notch on the DIMM exactly match the notch in the socket. 2. Firmly insert the DIMMinto the socket until the retaining clips snap back in place.
13 Hardware Installation Process 2 - 3 Connect ribbon cables, cabinet wires, and power supply 2-3-1 : I/O Back Panel Introduction.
14 English GA-5YXS1-RH/GA-5YXS-RH Motherboard LAN LED Description LED1 (Green) LED2 (Green/Y ellow) Color Condition Description Green O N LAN Link / no Access Green BLINK LAN Access - O F F Idle - O F.
15 Connector Introduction 2 - 4 Connectors Introduction & Jumper Setting 1. A TX2 12 . USB3 (USB cable connector) 2. A TX1 13. HDDBPB1 3. IDE1 (IDE cable connector) 14 . IPMB1 4. FDC1 (Floppy cable connector) 15 . F AN1 (CPU fan cable connector) 5.
16 English GA-5YXS1-RH/GA-5YXS-RH Motherboard Pin No. Definition 1 GND 2 GND 3 +12V 4 +12V 24 13 12 1 4 1 2 3 1/2) A TX2/1 (24-pin/4-pin A TX power connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard.
17 Connector Introduction 3 ) IDE1 (IDE cable connector) An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive).
18 English GA-5YXS1-RH/GA-5YXS-RH Motherboard SA T A 3Gb/s can provide up to 300 MB/s transfer rate. Please refer to the BIOS setting for the SA T A 3Gb/s and install the proper driver in order to work properly. 5/ 6/ 7/ 89/10 ) SA T A_ 1~6 (Serial A T A cable connectors) 1 7 Pin N o.
19 Connector Introduction 13 ) HDDBPB1 (SMBUS connector for power supplyr) 1 Pin No. Definition 1 SCL 2 SDA 3 DETECT 4 HDD LED 5 INT 6 GND 14 ) IPMB1 (IPMB connector) 1 Pin No.
20 English GA-5YXS1-RH/GA-5YXS-RH Motherboard 15/ 16/ 17 ) F AN1 (CPU fan / System fan cable connectors) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(CPU_F AN) power connector and possesses a foolproof connection design.
21 Connector Introduction 16 ) F_Panel (2X13 Pins Front Panel connector) Please connect the power LED, PC speaker, reset switch and power switch of your chassis front panel to the F_P ANEL connector according to the pin assignment above. 26 13 2 1 Pin No.
22 English GA-5YXS1-RH/GA-5YXS-RH Motherboard Y ou may clear the CMOS data to restore its default values by this jumper . Default value doesn’t include the “Shunter” to prevent from improper use this jumper . T o clear CMOS, temporarily short 2-3 pin.
Jumper Setting 23 21 ) RECCOVERY1 ( BIOS recovery jumper) 1 1 1-2 Close: Enable BIOS Recovery function. 2-3 Close: Normal operation(Default setting).
24 English GA-5YXS1-RH/GA-5YXS-RH Motherboard 2 - 5 Block Diagram VRD 1 1.0 ISL6306/6326CR CHANNEL A DDR2 667/800 Un-Buffered ECC DIMM x 2 CHANNEL B DDR2 667/800 Un-Buffered ECC DIMM x 2 MCH BIGBY -V .
25 BIOS Setup < Ç > Move to previous item < È > Move to next item < Å > Move to the item in the left hand < Æ > Move to the item in the right hand <Esc> Main Menu - Q.
26 GA-5YXS1-RH/GA-5YXS-RH Motherboard z z z z z Main This setup page includes all the items in standard compatible BIOS. z z z z z Adva nced This setup page includes all the items of AMI special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters.
27 BIOS Setup Syste m Ti m e The time is calculated based on the 24-hour military time clock. Set the System Time (HH:MM:SS) System Date Set the System Date.
28 GA-5YXS1-RH/GA-5YXS-RH Motherboard SA T A Port 1/2/3/4/5/6 The category identifies the types of Serial SA T A hard disk from drive 1 to 6 that has been installed in the computer. System will automatically detect HDD type. Note that the specifications of your drive must match with the drive table.
29 BIOS Setup Advanced Processor Options Figure 1-1: Advanced Processor Option Adva nced Processor Option This category includes the information of CPU Speed, Processor CPUID and Processor L2 Cache. Setup menu for C1 Enhanced Mode, No Execute Mode Memory Protection, Intel EIST Support, and PECI Interface .
30 GA-5YXS1-RH/GA-5YXS-RH Motherboard Intel EIST Support Select the Power Management desired: Enabled C s tates and GV1/GV3 are enabled. (Default setting) C States Only GV1/GV3 are disabled. GV1/GV3 Only C states are disabled. Disabled C states and GV1/GV3 are disabled.
31 BIOS Setup Figure 2: Advanced Adva nced About This Section: Advanced With this section, allowing user to configure your system for basic operation. User can change the Memory Configuration, PCI Configuration, I/O Configuration, Advanced Chipset Control and Hardware Monitor.
32 GA-5YXS1-RH/GA-5YXS-RH Motherboard Memory Configuration Figure 2-1: Memory Configuration Installed Me mory/A vailable to OS/Used by device s/ DIMM Group 1,2,3,4 Status These category is display-only which is determined by POST (Power On Self T est) of the BIOS.
33 BIOS Setup PCI Configuration Figure 2-2: PCI Configuration Embedded NIC Onboard LAN1 Control Enabled Enable onboard LAN device. (Default setting) Disabled Disable this function. LAN1 Option ROM Enabled Enableing this item to initialize device expansion ROM.
34 GA-5YXS1-RH/GA-5YXS-RH Motherboard PCI Slot 1/2/3/4/5 Option ROM Enabled Enableing this item to initialize device expansion ROM. (Defualt setting) Disabled Disable this function.
35 BIOS Setup I/O Device Configuration Figure 2-3: I/O Device Configuration Serial Port A This allows users to configure serial prot A by using this option. Enabled Enable the configuration (Default setting) Disabled Disable the configuration. Base I/O Address/IRQ 3F8/IRQ4 Set IO address to 3F8/IRQ4.
36 GA-5YXS1-RH/GA-5YXS-RH Motherboard Base I/O Address/IRQ 3F8/IRQ4 Set IO address to 3F8/IRQ4. 2F8/IRQ3 Set IO address to 2F8/IRQ3. (Default setting) 3E8/IRQ4 Set IO address to 3E8/IRQ4. 2E8/IRQ3 Set IO address to 2E8/IRQ3. USB Controller This item allows users to enable or disable the USB device by setting item to the desired value.
37 BIOS Setup driver supports AHCI mode. Disabled Disabled this function. SA T A RAID Enable Enabled Enabled SA T A RAID function. Disabled Disable this function.
38 GA-5YXS1-RH/GA-5YXS-RH Motherboard Advanced Chipset Control Figure 2-4: Advanced Chipset Control Ena ble Multi media T i mer Y es Enable Multimedia Timer support.
39 BIOS Setup Hardware Monitor Figure 2-5: Hardware Monitor CPU / Motherboard T e mperature Display the current CPU temperature, Motherboard, and Ambient temperature. V oltage Monitor: DD R1V8, VCC3, VCORE, 0V9, 5V Detect system's voltage status automatically.
40 GA-5YXS1-RH/GA-5YXS-RH Motherboard Boot -ti me Diagnostic When this item is enabled, system will shows Diagnostic status when system boot. Enabled Enable Boot-time Diagnostic. Disabled Disable this function. (Default setting) Re set Configuration Data Y es Reset all configuration data.
41 BIOS Setup Security Figure 3: Security Set User Password Y ou can only enter but do not have the right to change the options of the setup menus. When you select this function, the following message will appear at the center of the screen to assist you in creating a password.
42 GA-5YXS1-RH/GA-5YXS-RH Motherboard Set Supervisor Password Y ou can install and change this options for the setup menus. T ype the password up to 6 characters in lengh and press <Enter>. The password typed now will clear any previously entered password from the CMOS memory .
43 BIOS Setup Server Figure 4: Server.
44 GA-5YXS1-RH/GA-5YXS-RH Motherboard System Management Figure 4-1: System Management Server M a nagement This category allows user to view the server management features. Including information of BIOS V ersion . All items in this menu cannot be modified in user’s mode.
45 BIOS Setup Figure 4-2: Console Redirection Console Redirection BIOS Redirection Port If this option is set to enabled, it will use a port on the motherboard. Serial Port A Use Serial Port A as he COM port address. Serial Port B Use Serial Port B as he COM port address.
46 GA-5YXS1-RH/GA-5YXS-RH Motherboard Flow Control This option provide user to enable the flow control function. None Not supported. XON/OFF Software control. CTS/RTS Hardware control. (Default setting) T erminal T ype This option allows user to select the specified terminal type.
47 BIOS Setup Assert NMI on SERR If thisoption is set to enabled, PCI bus system error (SERR) is enabled and is routed to NMI. Enabled Enable Assert NMI on SERR. (Default setting) Disabled Disable this function. Post Error Pause If this item is set to enabled, the system will wai for user intervention on critical POST errors.
48 GA-5YXS1-RH/GA-5YXS-RH Motherboard Boot Figure 5: Boot Boot Priority Order This field determines which type of device the system attempt to boot from after PhoenixBIOS Post completed. Specifies the boot sequence from the available devices. If the first device is not a bootable device, the system will seek for next available device.
49 BIOS Setup Exit Figure 6: Exit About This Section: Exit Once you have changed all of the set values in the BIOS setup, you should save your changes and exit BIOS setup program. Select “Exit” from the menu bar, to display the following sub-menu.
50 GA-5YXS1-RH/GA-5YXS-RH Motherboard Exit Saving Cha nge s This option allows user to exit system setup with saving the changes. Press <Enter> on this item to ask for the following confirmation message: Pressing ‘Y’ to store all the present setting values tha user made in this time into CMOS.
51 BIOS Setup Exit Discarding Cha nge s This option allows user to exit system setup without changing any previous settings values in CMOS. The previous selection remain in effect. This will exit the Setup Utility and restart your compuetr when selecting this option.
52 GA-5YXS1-RH/GA-5YXS-RH Motherboard Load Settup Default This option allows user to load default values for all setup items. When you press <Enter> on this item, you will get a confirmation dia.
53 BIOS Setup Discard Cha nge s This option allows user to load previos values from CMOS for all setup item. When you press <Enter> on this item, you will get a confirmation dialog box with a me.
54 GA-5YXS1-RH/GA-5YXS-RH Motherboard Save Cha nge s This option allows user to save setup dat ato CMOS. When you press <Enter> on this item, you will get a confirmation dialog box with a message as below: Press [Y es] to save setup daya to CMOS.
An important point after buying a device Gigabyte GA-5YXS-RH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gigabyte GA-5YXS-RH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gigabyte GA-5YXS-RH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gigabyte GA-5YXS-RH you will learn all the available features of the product, as well as information on its operation. The information that you get Gigabyte GA-5YXS-RH will certainly help you make a decision on the purchase.
If you already are a holder of Gigabyte GA-5YXS-RH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gigabyte GA-5YXS-RH.
However, one of the most important roles played by the user manual is to help in solving problems with Gigabyte GA-5YXS-RH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gigabyte GA-5YXS-RH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
