Instruction/ maintenance manual of the product GA-3CCWL-RH Gigabyte
Go to page of 84
USER’S MANUAL GA-3CCWV -RH GA-3CCWL-RH AMD Socket F Dual Processor Motherboard AMD Opteron ™ Socket F Dual Processor Motherboard Rev. 1001 12ME-3CCWVRH-1001R * The WEEE marking on the product indi.
2 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard T able of Content Item Checklist ......................................................................................... 4 WARNING! ......................................................................
English 3 T able of Content Exit ............................................................................................................. 6 2 Chapter 4 Application Driver Installation ............................................... 6 7 A.NVDIA Chipset Driver Installation .
4 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. T o protect them against damage from static electricity, you should follow some precautions whenever you work on your computer.
5 Introduction Chapter 1 Introduction 1.1 Features Summary Form Factor y 12” x 10.5” CEB form factor, 8 layers PCB. CPU y Support Dual AMD Opteron TM Dual Core Processors (Socket F) y The HyperTransport link of the AMD Opteron processor is capable of operating at 400, 800, 1200, and 1600 MT/s.
6 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard Hardware Monitor y Enhanced features with CPU Vcore, 1.5V reference, VCC3 (3.3V) , VBA T3V , +5VSB, CPUA/B T emperature, and System T emperature V alues .
.
8 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard 1. Primary CPU 24. SA T A5 Connector 2. Secondary CPU 25. SA T A6 Connector 3 . N VIDIA 26. 4. 27. Front Fa n Connector 5. BIOS Fla sh 28. Rear Fa n Connector 6. ITE IT8716F 29. CPU0 Fan Connector 7. Realtek ALC 883 30.
9 Introduction 2 1 3 4 5 6 9 8 7 10 12 11 13 14 15 16 19 18 17 22 21 23 24 25 20 26 29 30 27 31 33 32 34 36 35 37 28 39 38 42 40 44 41 45 46 43.
10 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard 1. Primary CPU 24. SA T A5 Connector 2. Secondary CPU 25. SA T A6 Connector 3 . N VIDIA 26. 4. BIOS Fla sh 27. Front Fan Conne ctor 5. Battery 28. Rea r F an Connector 6. ITE IT8716F 29. CPU0 Fan Connector 7.
11 Introduction 2 1 3 4 5 6 9 7 10 12 11 13 14 15 16 19 18 17 22 21 23 25 20 26 29 30 27 31 33 32 34 36 28 44 45 24 37 39 38 42 40 41 43 8 35.
12 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard Chapter 2 Hardware Installation Process 2-1: Installing Processor and CPU Haet Sink Before installing the processor and cooling fan, adhere to the following cautions: 1. The processor will overheat without the heatsink and/or fan, resulting in permanent irreparable damage.
13 Hardware Installation Process Step 4. When the processor installation is completed, apply thermal grease to the processor(as prior to installing the heatsink. AMD recommends using a high thermal conductivity grease for the thermal interface material rather than a phase change material.
14 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard 2-1-2: Installing Heat Sink Step 1. Attach th cooling fan clip to the processor scoket. Align the heatsink assembly with the support frame mating with the backer plate standoffs as shown in Figure 5&6.
15 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard 2-2: Install Memory Modules Before installing the processor and heatsink, adhere to the following warning: When DIMM LED is ON, do not install/remove DIMM from socket.
16 Hardware Installation Process Installation Step: 1. Unlock a DIMM socket by pressing the retaining clips outwards. 2. Aling a DIMM on the socket such that the notch on the DIMM exactly match the notches in the socket. Firmly insert the DIMMinto the socket until the retaining clips snap back in place.
17 Hardware Installation Process T able 1. V aild DIMM Configuration for 64 bit Mode T able 2. V aild DIMM Configuration for 128 bit Mode Logical DIMM 0 Ligical DIMM1 DIMM 0 (MB) DIMM 1 (MB) DIMM 2 (M.
18 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard 2-3: Connect ribbon cables, cabinet wires, and power supply 2-3-1 : I/O Back Panel Introduction.
19 Hardware Installation Process PS/2 Keyboard and PS/2 Mouse Connector T o install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple). Parallel Port The parallel port allows connection of a printer, scanner and other peripheral devices.
20 Hardware Installation Process LAN LED Description LED1 (Green) LED2 (Green/Y ellow) Color Condition Description Green O N LAN Link / no Access Green BLINK LAN Access - O F F Idle - OF F 10Mbps conn.
21 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard 2-4: Connectors Introduction 1. A T X 1 15. F1_1394 (IEEE 1394 connector) 2. A T X 2 16. F2_1394 (IEEE 1394 connector) 3. I D E 17. F_Audio (Front Audio Connector) 4. FDD (Floppy Connector) 18 . CD_IN 5.
22 Connector Introduction 1) A TX1 (Auxukiary Power Connector) AC power cord should only be connected to your power supply unit after A TX power cable and other related devices are firmly connected to the mainboard. PIN No. Definition 1 +3.3V 2 +3.
23 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard 3 ) IDE (IDE Connector) Please connect first harddisk to IDE1. The red stripe of the ribbon cable must be the same side with the Pin1. 4 ) FDD (Floppy Connector) Please connect the floppy drive ribbon cables to FDD.
24 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard Y ou can connect the Serial A T A device to this connector , it provides you high speed transfer rates (3.
25 Connector Introduction 14 ) F_Panel (2X10 Pins Front Panel connector) Please connect the power LED, PC speaker, reset switch and power switch of your chassis front panel to the F_P ANEL connector according to the pin assignment above.
26 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard 15/16 ) F1_1394/F2_1394 (IEEE 1394 connectors) 2 10 9 1 17) F_AUDIO (Front AUDIO Connector) If you want to use Front Audio connector , you must remove 5-6, 9-10 Jumper . In order to utilize the front audio header , your chassis must have front audio connector .
27 Connector Introduction 18) CD_IN (CD IN,Blank) Connect CD-ROM or DVD-ROM audio out to the connector. Pin N o. Definition 1 CD-L 2 GND 3 GND 4 CD_R 1 19 ) SPDIF_IN Use this device only when your hardware system has digital output function.
28 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard 20/21 ) CPU0_F AN/CPU1_F AN (CPU0/1 Fan Connectors) Please note, a proper installation of the CPU cooler is essential to prevent the CPU from running under abnormal condition or damaged by overheating.The CPU fan connector supports Max.
29 Connector Introduction REAR_FAN 23/24 ) FRONT_F AN/REAR_F AN (System Fan Connectors) This connector allows you to link with the cooling fan on the system case to lower the system temperature. These connectors are for system use only. 1 1 Pin No. Definition 1 GND 2 12V 3 Sense 4 Control FRONT_FAN If you want to erase CMOS.
30 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard 1 26) CI (CASE OPEN) This 2 pin connector allows your system to enable or disable the “case open” item in BIOS if the system case begin remove.
Jumper Setting 31 2-5: Jumper Setting 1. BIOS_RECOVERY 2. CLR_CMOS 3 . SLI_EN 1 2 3.
32 English GA-3CCWV -RH/GA-3CCWL-RH Motherboard Y ou may clear the CMOS data to restore its default values by this jumper. Default value doesn’t include the “Shunter” to prevent from improper use this jumper. T o clear CMOS, temporarily short 1-2 pin.
Jumper Setting 33 3 ) SLI_EN (Support SLI Function) 1 1 1-2 Close: Enable SLI function 2-3 Close: Disable SLI function.
Block Diagram 34 2-7: Block Diagram Processor SKT 1207 L1 CPU0 128-Bit 200/266/333/400MHz DDR2 SDRAM CONN0 DDR2 SDRAM CONN1 DDR2 SDRAM CONN2 DDR2 SDRAM CONN3 Processor SKT 1207 L1 CPU0 DDR2 SDRAM CONN.
35 BIOS Setup < Ç > Move to previous item < È > Move to next item < Å > Move to the item in the left hand < Æ > Move to the item in the right hand <Esc> Main Menu - Q.
36 GA-3CCWV-RH Motherboard z z z z z Main This setup page includes all the items in standard compatible BIOS. z z z z z Adva nced This setup page includes all the items of AMI special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters.
37 BIOS Setup System T i me The time is calculated based on the 24-hour military time clock. Set the System Time (HH:MM:SS) System Date Set the System Date. Note that the “Day” automatically changed after you set the date.
38 GA-3CCWV-RH Motherboard Legacy Diskette A This category identifies the type of floppy disk drive A that has been installed in the computer . Disabled Disable this device. 360KB, 5 1/4 in. 3 1/2 inch A T -type high-density drive; 360K byte capacity 1.
39 BIOS Setup Multi-Sector T ransfer This field displays the information of Multi-Sector Transfer Mode. Disabled: The data transfer from and to the device occurs one sector at a time. Auto: The data transfer from and to the device occurs multiple sectors at a time if the device supports it.
40 GA-3CCWV-RH Motherboard Advanced Processor Options Figure 1-1: Advanced Processor Option Adva nced Proce ssor Option This category displays the information of current CPU T ype, CPU Speed, CPU ID, and CPU Path ID. These category is display-only which is determined by POST (Power On Self T est) of the BIOS.
41 BIOS Setup Figure 2: Advanced Adva nced About This Section: Advanced With this section, allowing user to configure your system for basic operation. User can change the processor options, chipset configuration, PCI configuration and chipset control.
42 GA-3CCWV-RH Motherboard Memory Configuration Figure 2-1: Memory Configuration Syetem Me mory/Extended Memory/ P0_DIMMA1/B1, A2/B2/ P1_DIMMA1/B1, A2/B2Status These category is display-only which is determined by POST (Power On Self T est) of the BIOS.
43 BIOS Setup PCI Configuration Figure 2-2: PCI Configuration Figure 2-2-1: Embedded NIC.
44 GA-3CCWV-RH Motherboard Embedded NIC Onboard LAN1 Control Enabled Enable onboard LAN1 device. (Default setting) Disabled Disable this function. Option ROM Scan Enabled Enableing this item to initialize device expansion ROM.
45 BIOS Setup PCI /PNP ISA UMB Region Exclusion Reserve specific upper memory blocks for use by legacy ISA devices. C800-CBFF/ CC00-CFFF/ D000-D3FF/ D400 -D7FF/ D800-DBFF/ DC00-DFFF PCI /PNP ISA IRQ Resource Exclusion Reserve specific IRQs for use by legacy ISA devices.
46 GA-3CCWV-RH Motherboard I/O Device Configuration Figure 2-3: I/O Device Configuration Serial Port A This allows users to configure serial prot A by using this option. Auto BIOS or OS choosed configuration automatically. (Default setting) Enabled Enable the configuration.
47 BIOS Setup Parallel Port This allows users to configure parallel port by using this option. Auto BIOS or OS choosed configuration automatically. (Default setting) Enabled Enable the configuration. Disabled Disable the configuration.
48 GA-3CCWV-RH Motherboard SA T A0/SA T A1/SA T A2 Controller Enabled Enables on-board Serial A T A controller . (Default setting) Disabled Disables on-board Serial A T A controller . N V RAID Configuration Enabled Enable NVIDA RAID Control.
49 BIOS Setup Advanced Chipset Control Figure 2-4: Advanced Chipset Control W ake on Keyboard/Mouse This item allows you to set the enable/disable for powering-on the system by keyboard and mouse. Enabled Wake on Keyboard/Mouse.
50 GA-3CCWV-RH Motherboard W ake On Ring This item allow user to determine the action of the system power is off and the modem is ringing. Enabled Enable Wake On Ring. Disabled Disable this function. (Default setting) Note: This item must enabled if you’re running under Windows operating system.
51 BIOS Setup Hardware Monitor Figure 2-5: Hardware Monitor V oltage Monitor: VCORE0/1, 3.3V , 5V , 12V , DD RP0/P1, 5 Dual, VBA T Detect system's voltage status automatically.
52 GA-3CCWV-RH Motherboard Boot -ti me Di agnostic Screen When this item is enabled, system will shows Diagnostic status when system boot. Enabled Enable Boot-time Diagnostic.(Default setting) Disabled Disable this function.
53 BIOS Setup Multi proce ssor Specification This option allows user to configure the multiprocessor(MP) specification revision level. Some operating system will require 1.1 for compatibility reasons. 1.4 Support MPS V ersion 1.
54 GA-3CCWV-RH Motherboard Security Figure 3: Security Set User Password Y ou can only enter but do not have the right to change the options of the setup menus. When you select this function, the following message will appear at the center of the screen to assist you in creating a password.
55 BIOS Setup Set Supervisor Password Y ou can install and change this options for the setup menus. T ype the password up to 6 characters in lengh and press <Enter>. The password typed now will clear any previously entered password from the CMOS memory .
56 GA-3CCWV-RH Motherboard Server Figure 4: Server.
57 BIOS Setup System Management Figure 4-1: System Management Server M a nagement This category allows user to view the server management features. Including information of BIOS V ersion . All items in this menu cannot be modified in user’s mode.
58 GA-3CCWV-RH Motherboard Figure 4-2: Console Redirection Console Redirection COM Port Addre ss If this item allows user to determine which port to use for console reidrection. On-board COMA Use COMA as he COM port address. On-board COMB Use COMB as he COM port address.
59 BIOS Setup Flow Control This option provide user to enable the flow control function. None Not supported. XON/OFF Software control.
60 GA-3CCWV-RH Motherboard After Power Failure This option provides user to set the mode of operation if an AC / power loss occurs. Power On System power state when AC cord is re-plugged. Stay Off Do not power on system when AC power is back.
61 BIOS Setup Boot Figure 5: Boot Boot Priority Order This field determines which type of device the system attempt to boot from after PhoenixBIOS Post completed. Specifies the boot sequence from the available devices. If the first device is not a bootable device, the system will seek for next available device.
62 GA-3CCWV-RH Motherboard Exit Figure 6: Exit * * * * * About This Section: Exit Once you have changed all of the set values in the BIOS setup, you should save your changes and exit BIOS setup program. Select “Exit” from the menu bar, to display the following sub-menu.
63 BIOS Setup Exit Saving Cha nge s This option allows user to exit system setup with saving the changes. Press <Enter> on this item to ask for the following confirmation message: Pressing ‘Y’ to store all the present setting values tha user made in this time into CMOS.
64 GA-3CCWV-RH Motherboard Load Settup Default This option allows user to load default values for all setup items. When you press <Enter> on this item, you will get a confirm.
65 BIOS Setup Discard Cha nge s This option allows user to load previos values from CMOS for all setup item. When you press <Enter> on this item, you will get a confirmation .
66 GA-3CCWV-RH Motherboard Save Cha nge s This option allows user to save setup dat ato CMOS. When you press <Enter> on this item, you will get a confirmation dialog box with a message as below: Press [Y es] to save setup daya to CMOS.
Driver Installation 67 Revision History Chapter 4 Application Driver Installation Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.
GA-3CCWV-RH/GA-3CCWL-RH Motherboard 68 2. InstallShield Wizard Welcome Window 3. Select Features 2. Click "Next" to start the installation 3.
Driver Installation 69 4. NVDIA IDE SW Driver Information 4. Click "Next" to process the installation. 5. IDE SW Driver Installation Confirmation Dialog 5.
GA-3CCWV-RH/GA-3CCWL-RH Motherboard 70 6. Firewall and ForceWare Network Access Manager Installation Confirmation Dialog 6. Click “Y es”. 7. Network Access Manager Installation 7.
Driver Installation 71 8. Network Access Manager Setup T ype Selection 8. Select the setup type and determine the driver destination folder. Click “Next” 9. Installation Complete. Restart Computer 10 . Select ‘Y es, I want to restart my computer now’ and click “Finish”.
GA-3CCWV-RH/GA-3CCWL-RH Motherboard 72 B. Audio Hot Fix Driver Installation (For Windows 64-bit operating system) 1. Autorun 1. Click "Browse this CD” item. Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show the installation guide.
Driver Installation 73 2. Select “Realtek” Folder 3. Execute the file 2. Click "Realtek" folder. 3. Double click the self-execute file to start installation.
GA-3CCWV-RH/GA-3CCWL-RH Motherboard 74 4. InstallShield Wizard Welcome Window 4. Click "Next" to start the installation 5. License Agreement 5.
Driver Installation 75 6. Installation Complete 6. Installation complete. Click “Finish”..
GA-3CCWV-RH/GA-3CCWL-RH Motherboard 76 Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.
Driver Installation 77 2. InstallShield Wizard Welcome Window 2. Click "Next" to start the installation 3. Installaiton Wizard Complete 3. Select ‘Y es, I want to restart my computer now’ and click “Finish”.
GA-3CCWV-RH/GA-3CCWL-RH Motherboard 78 D. DirectX 9.0 Driver Installation Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.
Driver Installation 79 2. License Agreement 3. Start Installaiton 3. Click “Next” to start the installation . 2. Select “I accept the agreement andclick "Next" to process the installation.
GA-3CCWV-RH/GA-3CCWL-RH Motherboard 80 4. Installaiton Wizard completed 4. Click "Finish". Installation complete..
81 Appendix Revision History Chapter 5 Appendix Appexdix: PCI-X Card QVL . o Nm e t I t s e T e r u d e c o r P t s e T " d e l b a s i D " e s a e l P : e t o N ( ) n o i t c n u f " C C E " y r o m e m t l u s e Rk r a m e R .
GA-3CCWV-RH/GA-3CCWL-RH Motherboard 82 . o Nm e t I t s e T e r u d e c o r P t s e T " d e l b a s i D " e s a e l P : e t o N ( ) n o i t c n u f " C C E " y r o m e m t l u s e Rk r a m e R .
83 Appendix Appendix : Acronyms Acronyms Meaning ACPI A d v anced Configuration and Power Interface A P M Advanced Power Management A G P Accelerated Graphics Port A M R Audio Modem Riser A C R Advanc.
GA-3CCWV-RH/GA-3CCWL-RH Motherboard 84 L A N Local Area Network L BA Logical Block Addressing LE D Light Emitting Diode M H z Megahertz MIDI Musical Instrument Digital Interface M T H Memory Translator Hub MP T Memory Protocol Translator N I C Network Interface Card O S Operating System O E M Original Equipment Manufacturer PA C PCI A.
An important point after buying a device Gigabyte GA-3CCWL-RH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gigabyte GA-3CCWL-RH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gigabyte GA-3CCWL-RH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gigabyte GA-3CCWL-RH you will learn all the available features of the product, as well as information on its operation. The information that you get Gigabyte GA-3CCWL-RH will certainly help you make a decision on the purchase.
If you already are a holder of Gigabyte GA-3CCWL-RH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gigabyte GA-3CCWL-RH.
However, one of the most important roles played by the user manual is to help in solving problems with Gigabyte GA-3CCWL-RH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gigabyte GA-3CCWL-RH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
