Instruction/ maintenance manual of the product LP301A-5100 Giant
Go to page of 12
Triplex Ceramic Plunger Pump Operating Instructions/ Manual Mode l LP301 A-510 0 Contents: Installation Instructions: page 2 Specifications: page 3 Exploded View: page 4 Parts List / Kits: page 5 Repa.
2 INS TALLATION INSTRUCTIONS 4. Use of a dampener is necessary to minimize pulsation at drive elements, plumbing, connec- tions, and other system areas. The use of a dampener with Giant Industries, Inc. pumps is optional, although recommended by Giant Industries, Inc.
3 Specifications Model LP301A-5100 PULLEY INFORMATION Pulley selection and pump speed are based on a 1725 RPM motor and "B" section belts. When selecting desired GPM, allow for a ±5% tolerance on pumps output due to variations in pulleys, belts and motors among manufactur- ers.
4 Exploded V iew - LP301A-5100.
LP301A-5100 PARTS LIST ITEM PART DESCRIPTION QTY 30 07779 Oil Scraper 3 31 07133 Oil Seal 3 35 13364-0100 Seal Sleeve 3 36 13238 Leakage Seal 3 37 13240-0100 Seal Case 3 38 07140 O-Ring, Seal Case 3 3.
6 1) Loosen and remove tension plugs (48) with a 36mm socket wrench. T O CHECK V AL VES NOTE: Always take time to lubricate all metal and non-metal parts with a light film of oil before reassembling. This step will help ensure proper fit, at the same time protecting the pump non-metal parts (elastomers) from cutting and scoring.
11) Remove the pressure ring (40A), v-sleeves (40), and support ring (40B), from the seal sleeve. Remove the pressure spring (41). Examine seals carefully and replace if worn. Clean surfaces of seal sleeves (35) which come in contact with the crankcase (1) and sealing surfaces of valve casing (43).
8 LP301A-5100 REPAIR INSTRUCTIONS 12) Check plunger surface (29B). If plunger pipe is worn out, loosen tension screws (29C) with a 15mm socket and pull off plunger pipe to the front. Clean front surface of plunger (29B) thoroughly. Apply a small drop of locktite to tension screw.
Pump Mounting Selection Guide Bushings 06496 - 35 mm H Bushing Pulley & Sheaves 07165 - 12.75 ” Cast Iron - 4 gr. AB Section Rails 07357 - Plated Steel Channel Rails (L=11.75 ” x W=1.88 ” x H=3.00 ” ) 9 LP301A-5100 REPAIR INSTRUCTIONS TO DISMANTLE GEAR END After removing valve casing (43) and plunger pipe (29B), drain the oil.
10 PUMP SYSTEM MALFUNCTION MALFUNCTION CAUSE REMEDY The Pressure and/ Worn packing seals Replace packing seals or the Delivery Broken valve spring Replace spring Drops Belt slippage Tighten or Replace.
LP301A-5100 DIMENSIONS - Inches (mm) 11.
GIANT INDUSTRIES, INC. , 900 N. Westwood Ave., P.O. Box 3187, Toledo, Ohio 43607 PHONE (419) 531-4600, FAX (419) 531-6836, www.giantpumps.com Copyright 2003 Giant Industries, Inc.
An important point after buying a device Giant LP301A-5100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Giant LP301A-5100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Giant LP301A-5100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Giant LP301A-5100 you will learn all the available features of the product, as well as information on its operation. The information that you get Giant LP301A-5100 will certainly help you make a decision on the purchase.
If you already are a holder of Giant LP301A-5100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Giant LP301A-5100.
However, one of the most important roles played by the user manual is to help in solving problems with Giant LP301A-5100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Giant LP301A-5100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center