Instruction/ maintenance manual of the product HR3030 Giant
Go to page of 12
Triplex Ceramic Plunger Pump Operating Instructions/ Repair and Service Manual Consumer Pumps Models HR2527A/HR3025/ HR3030 Pump s Contents: Installation Instructions: page 2 Pump Specifications: page.
2 INST ALLA TION INSTRUCTIONS between the pump and the work area to protect the pump from pressure spikes in the event of a blockage or the use of a shut-off gun. 4. Reverse rotation may be safely achieved by following a few guidelines available upon request from Giant Industries, Inc.
HR 25 27A EL EC TRI C HO RS E P OW E R REQUIREMENTS R P M G P M 1000 P SI 1500 PS I 2 000 PS I 2750 PSI 3 450 2.5 1.7 2. 6 3. 4 4.7 3 Specifications Model HR2527A Axial Pump V olume HR2527A .............................................................
Specifications Model HR3025 Axial Pump V olume HR3030 .................................................................................... 3.0 GPM Maximum Discharge Pressure ............................................................. 2500 PSI Maximum Inlet Pressure .
HR 3 030 ELECT RIC HORSEPOW E R REQUIREMENTS R P M G P M 1500 P SI 2000 PSI 2 500 PS I 3000 PSI 3 450 3.0 3.1 4. 1 5. 1 6.2 Specifications Model HR3030 Axial Pump V olume HR3030 .........................................................................
6 HR2527A/HR3025/HR3030 EXPLODED VIEW.
7 HR2527A/HR3025/HR3030 SERIES PARTS LIST * When ordering a 06311 please order 17021 which includes 06311, 07344, 07805, 06300 - HR2527A/HR3025 * When ordering a 06403, please order 17038 which includ.
Plunger Packing Kit # 09465 Item Part # Description Qty . 2 2 06290 Pressure Ring 3 2 0 06315 V -Sleeve 3 V alve Assembly Kit # 09475 Item Part # Description Qty . 1 8 07374 V alve Spring 6 1 9 A 06267 Guided P-V alve 3 1 9 06295 Discharg e V alve Cone 3 8 Position Item# Description T orque Amount (f t.
9 PUMP TROUBLE SHOOTING MALFUNCTION The Pressure and/or the Delivery Drops Water in crankcase Noisy Operation Rough/Pulsating Operation with Pressure Drop Pressure Drop at Gun Excessive Leakage High C.
10 RE P AIR INSTRUCTIONS - HR2527A/HR3025/HR3030 1 . W ith a 19mm socket wrench, remove the three discharge valve plugs (34). Inspect the valve plug o-rings (56) for wear , and replace as neces- sary . Remove the valve spring (18) and valve cone (19) from the manifold (28).
11 7 . T ap the back of the manifold (28) with a rubber mallet to dislodge, and slide off the plungers (10). T ake note of the position of the discharge port so as to place the port in the same position during reassembly . 8 . W ith a 19mm socket wrench, remove the guide plug (54) and o-ring (56) from the manifold (28).
GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free from defects in workmanship and material as follows: 1. For portable pressure washers and self-service car wash applications, the discharge manifolds are guaranteed for the life of the pump.
An important point after buying a device Giant HR3030 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Giant HR3030 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Giant HR3030 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Giant HR3030 you will learn all the available features of the product, as well as information on its operation. The information that you get Giant HR3030 will certainly help you make a decision on the purchase.
If you already are a holder of Giant HR3030, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Giant HR3030.
However, one of the most important roles played by the user manual is to help in solving problems with Giant HR3030. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Giant HR3030 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
