Instruction/ maintenance manual of the product GP8060 Giant
Go to page of 12
Contents: Installation Instructions: page 2 Pump Specifications: page 3-5 Exploded View/Parts List: pages 6-7 Repair Kits/Tool List:/Torque Specifications page 8 Troubleshooting Chart: page 8 Repair I.
2 Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a general outline for installation. If you have unique requirements, please contact Giant Indus- tries, Inc.
U.S. (Metric) V olume ............................................................. Up to 75.5 GPM ...... (285 LPM) Discharge Pressure .......................................... Up to 3000 PSI ........ (200 bar) Speed .................................
U.S. (Metric) V olume ............................................................. Up to 90 GPM ......... (341 LPM) Discharge Pressure .......................................... Up to 2500 PSI ........ (172 bar) Speed ................................
U.S. (Metric) V olume ............................................................ Up to 105 GPM ........ (400 LPM) Discharge Pressure ......................................... Up to 2000 PSI ......... (140 bar) Speed .................................
6 Exploded V iew - GP8050, GP8060, GP8065.
7 Part List - GP8050, GP8060, GP8065 Item Part Description Qty 1 05024 Crankcase 1 2 06912 Oil Filler Plug Assy with V ent 1 8 05035 Oil Dipstick Assy 1 9 06225 O-Ring 1 12 07109 Plug G1/2 2 13 07182 .
GP8055/GP8060/GP8065 PUMP REPAIR KITS Plunger Packing Kits GP8055 - #09616 Item Part # Description Qty. 3 8 A 13286 O-Ring 6 38B 05281 Support Ring 6 3 9 A 05066 O-Ring 6 40 07723 Seal Ring 3 42 05277 V-Sleeve 9 GP8060 - #09617 Item Part # Description Qty.
GP8055/GP8060/GP8065 PUMP REPAIR INSTRUCTIONS 6) Remove tension screw (36C) and take seal sleeve (39) together with all mounted parts out of the drive. Pull plunger pipe out of the seal assembly and check for any damage. Carefully , remove seal rings (40) and sleeves (42) with a screw driver .
8) T ake out the seal case (38) from the valve (if necessary secure 2 screwdrivers in the front O-ring groove to extract seal casing from valve casing). Coat seals with silicon grease before installing. Mounting surfaces of the crankcase and the valve casing must be clean and free of damage.
GP8055/GP8060/GP8065 PUMP REPAIR INSTRUCTIONS 1 1) Remove the connecting rod screws (24). Connecting rods are marked 1 to 3 for identification. Do not twist connecting rod halves or interchange them. When reassembling, the connecting rod must be fitted in their exact original position on the crankshaft journals.
3/07 GP8050, GP8060, GP8065.PMD GIANT INDUSTRIES, INC. 900 N. Westwood Ave. P.O. Box 3187 Toledo, Ohio 43607 (419) 531-4600 FAX (419) 531-6836 www.giantpumps.com Copyright 2007 Giant Industries, Inc. GP8050, GP8060, GP8065 SERIES DIMENSIONS - (mm) GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc.
An important point after buying a device Giant GP8060 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Giant GP8060 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Giant GP8060 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Giant GP8060 you will learn all the available features of the product, as well as information on its operation. The information that you get Giant GP8060 will certainly help you make a decision on the purchase.
If you already are a holder of Giant GP8060, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Giant GP8060.
However, one of the most important roles played by the user manual is to help in solving problems with Giant GP8060. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Giant GP8060 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
