Instruction/ maintenance manual of the product GP8045 Giant
Go to page of 12
Contents: Installation Instructions: page 2 Pump Specifications (GP8045): page 3 Exploded View page 4 Parts List: page 5 Pump Specifications (GP8048): page 6 Repair Kits/Tool List:/Torque Specificatio.
2 Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a general outline for installation. If you have unique requirements, please contact Giant Indus- tries, Inc.
U.S. (Metric) V olume ............................................................. Up to 48.9 GPM ...... (185 LPM) Discharge Pressure ......................................... Up to 4350 PSI ........ (300 bar) Speed ..................................
EXPLODED VIEW -- GP8045 / GP8048.
Item Part Description Qty 1 05380 Crankcase 1 2 06893 Oil Filler Plug Assy 1 5 22929 Copper W asher 2 6 06273 Oil Drain Plug 1 7 05381 Plug, Oil Dip Stick 1 8 05035 Oil Dip Stick Ass’y 1 9 01009 O-R.
U.S. (Metric) V olume ............................................................. Up to 56.8 GPM ...... (215 LPM) Discharge Pressure ......................................... Up to 3770 PSI ........ (260 bar) Speed ..................................
GP8045/GP8048 PUMP REPAIR KITS Plunger Packing Kits GP8045 - #09626 Item Part # Description Qty. 3 8 A 05387 O-Ring 6 3 9 A 05066 O-Ring 3 40 13290 Seal Ring 3 42 05394 V-Sleeve 9 GP8048 - #09627 Item Part # Description Qty.
GP8045/GP8048 PUMP REPAIR INSTRUCTIONS 6) Remove tension screw (36C) and take seal sleeve (39) together with all mounted parts out of the drive. Pull plunger pipe out of the seal assembly and check for any damage. Carefully , remove seal rings (40) and sleeves (42) with a screw driver .
8) T ake out the seal case (38) from the valve (if necessary secure 2 screwdrivers in the front O-ring groove to extract seal casing from valve casing). Coat seals with silicon grease before installing. Mounting surfaces of the crankcase and the valve casing must be clean and free of damage.
GP8045/GP8048 PUMP REPAIR INSTRUCTIONS 1 1) Remove the connecting rod screws (24). Connecting rods are marked 1 to 3 for identification. Do not twist connecting rod halves or interchange them. When reassembling, the connecting rod must be fitted in their exact original position on the crankshaft journals.
11 Dimensions - GP8045 / GP8048 - mm.
3/08 GP8045, GP8048.PMD GIANT INDUSTRIES, INC. 900 N. Westwood Ave. P.O. Box 3187 Toledo, Ohio 43607 (419) 531-4600 FAX (419) 531-6836 www.giantpumps.com Copyright 2008 Giant Industries, Inc. GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc.
An important point after buying a device Giant GP8045 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Giant GP8045 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Giant GP8045 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Giant GP8045 you will learn all the available features of the product, as well as information on its operation. The information that you get Giant GP8045 will certainly help you make a decision on the purchase.
If you already are a holder of Giant GP8045, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Giant GP8045.
However, one of the most important roles played by the user manual is to help in solving problems with Giant GP8045. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Giant GP8045 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
