Instruction/ maintenance manual of the product GP7145GB Giant
Go to page of 12
Triplex Ceramic Plunger Pump Operation Manual Models GP714 5G B and GP7255AGB pump with gearbox Contents: Installation and Safety Instructions page 2 Pump Specifications (GP7145GB-2.4): page 3 Exploded View: page 4 Parts List: page 5 Pump Specifications (GP7255AGB-2.
2 INST ALLA TION INSTRUCTIONS NOTE: Contact Giant Industries for Service School Information. Phone: (419)-531-4600. Operation and Maintenance Check oil level prior to starting and ensure trouble-free water supply. Oil: Use only 2 gallons (7.5 liters) if ISO VG-220 synthetic gear oil.
Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above. PULLEY INFORMATION Pulley selection and pump speed are based on a 1725 RPM motor and "B" section belts.
4 Exploded V iew - GP7145GB-2.4/GP7255AGB-2.4.
PARTS LIST - GP7145GB-2.4/GP7255AGB-2.4 5 ITEM PART DESCRIPTION QTY. 1 05324 Crankcase 1 1A 05313 Head for Oil Dipstick 1 1B 01009 O-Ring 1 2 13000 Oil Filler Plug Assy.
U.S. .................... ........... (Metric) V olume (Continuous) .............................................................. 65.8 GPM ..................... (250 LPM) V olume (Intermittent) ........................................................
Repair Kits - GP7145GB-2.4 and GP7255AGB-2.4 Plunger Packing Kit - GP7145GB-2.4 # 09603 Item Part # Description Qty . 38A 13156 O-Ring 3 38B 06258 O-Ring 3 39A 13290 Grooved Ring 3 42 13294 V -Sleeve 9 V alve Repair Kit # 09604 Item Part # Description Qty .
8 GP7145GB-2.4 and GP7255AGB-2.4 Repair Instructions TO CHECK VAL VES Loosen plugs (58), take out tension spring (57) and then remove the complete valve assembly (51) with either a valve tool or an M16 hexagon screw . T o remove the valve adapter (56) and tension spring (57), use a pullout tool size 5.
TO DISMANTLE REDUCTION GEAR Remove screws (G4). Using screwing two screws into the both thread bores, press off the gear cover (G2). Remove screw (G1 1) and take off the spacer ring (G7) and tension disc (G10). Push the cogwheel (G9) off the shaft by screwing two screws into both thread bores.
10 PUMP SYSTEM MA LFUNCTIONS M A LF UNCTION CA USE REM EDY The Pressure an d/ or th e Deliver y Drops W or n pack ing seals Replace pack ing seals Brok en valve spr ings Replac e spring s Belt slippag.
11 Dimensions - GP7145GB-2.4 and GP7255AGB-2.4 - Inches (mm).
10/07 GP7145GB_GP7255AGB.PMD GIANT INDUSTRIES, INC. 900 N. Westwood Ave. P.O. Box 3187 Toledo, Ohio 43607 (419) 531-4600 FAX (419) 531-6836 Copyright 2007 Giant Industries, Inc. www.giantpumps.com GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc.
An important point after buying a device Giant GP7145GB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Giant GP7145GB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Giant GP7145GB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Giant GP7145GB you will learn all the available features of the product, as well as information on its operation. The information that you get Giant GP7145GB will certainly help you make a decision on the purchase.
If you already are a holder of Giant GP7145GB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Giant GP7145GB.
However, one of the most important roles played by the user manual is to help in solving problems with Giant GP7145GB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Giant GP7145GB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
