Instruction/ maintenance manual of the product GP5145-5100 Giant
Go to page of 12
Contents: Installation Instructions: page 2 Pump Specifications: pages 3-4 Kits/Torque Specs: page 5 Recommended Maintenance: page 5 Exploded View/Parts List: pages 6-7 Trouble Shooting: page 8 Repair.
Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a general outline for installa- tion. If you have unique requirements, please contact Giant Industries, Inc.
Specifications Model GP5136-5100 HORSEPOWER RATINGS: The rating shown are the power re- quirements for the p u m p . G a s engine power outputs must be approximately twice the pump power requirements shown above.
Specifications Model GP5145-5100 Volume .................................................................................. 43.5 GPM .......................................... 164.6 LPM Discharge Pressure ...............................................
Plunger Packing Kits GP5136-5100 (p/n 09597) Item Part # Description Qty . 3 5 A 07303 O-Ring 6 35B 13286 O-Ring 3 36 13291-0020 Grooved Ring 3 3 7 A 07910 O-Ring 6 39 07142-0100 Pressure Ring 3 40 07144 V -Sleeve 6 GP5145-5100 (p/n 09598) Item Part # Description Qty .
Exploded V iew - GP5136-5100 and GP5145-5100 Pumps 6 55.
ITEM PART DESCRIPTION QTY. 1 13266 Crankcase 1 2 13000 O i l Filler Plug Assembly 1 3 07841-0100 Oi l S ig ht Gla ss As sy . 1 4 13267 Crankcase Cover 1 5 13268 O-Ring 1 8 07105 O i l D ip S tick 1 9 .
MALFUNCTION CA USE REMEDY W orn pack ing seals Replace pack ing seals Brok en valve springs Replace springs Belt slippage Tighten or r eplace belt W orn or Dam aged nozzle Replace nozzl e Fouled disch.
N o t e : Always take time to lubricate all metal and nonmetal parts with a light film of oil befor e reassembly . This step will ensur e proper f it, at the same time protecting the pump's nonmetal parts (i.e., the elastomers) from cutting and scoring.
T o Disassemble Gear End 1. Loosen inner hexagon screws (49) for the valve casing (43) with an allen wrench. Carefully remove valve casing from the crankcase (1). 2. Drain oil from the crankcase (1) by removing drain plug (12) with a 3/4" wrench.
Pump Dimensions - GP5136-5100 and GP5145-5100 Pumps - Inches (mm) 11.
GIANT INDUSTRIES, INC. 900 N. Westwood Ave., P.O. Box 3187, Toledo, Ohio 43607 Phone: (419)-531-4600 FAX (419)-531-6836, www.giantpumps.com Copyright 2004 Giant Industries, Inc.
An important point after buying a device Giant GP5145-5100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Giant GP5145-5100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Giant GP5145-5100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Giant GP5145-5100 you will learn all the available features of the product, as well as information on its operation. The information that you get Giant GP5145-5100 will certainly help you make a decision on the purchase.
If you already are a holder of Giant GP5145-5100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Giant GP5145-5100.
However, one of the most important roles played by the user manual is to help in solving problems with Giant GP5145-5100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Giant GP5145-5100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
