Instruction/ maintenance manual of the product CP220 Giant
Go to page of 12
Triplex Ceramic Plunger Pump Operating Instructions/ Repair and Service Manual For Models: CP218 CP220 CP230 Series CP200 Contents: Installation Instructions: page 2 Pump Specifications: pages 3 - 5 E.
2 INST ALLA TION INSTRUCTIONS 4. Use of a dampener is necessary to minimize pulsation at drive elements, plumbing, connec- tions, and other system areas. The use of a dampener with Giant Industries, Inc. pumps is optional, although recommended by Giant Industries, Inc.
CP218 H ORSEPO W ER R EQUIREMENT S R PM G PM 500 PSI 1000 PS I 1500 P S I 2030 PSI 200 0. 4 0. 1 0.3 0.4 0.6 300 0. 6 0. 2 0.4 0.6 0.8 400 0. 7 0. 2 0.
NOTE: In order to drive the pump from the side opposite the present shaft extension, simply remove the valve casing from the crankcase and rotate the pumps 180 degrees to the desired position. Be certain to rotate the seal case (item #20) as well, so that the weep holes are down at the six o'clock position.
NOTE: In order to drive the pump from the side opposite the present shaft extension, simply remove the valve casing from the crankcase and rotate the pumps 180 degrees to the desired position. Be certain to rotate the seal case (item #20) as well, so that the weep holes are down at the six o'clock position.
6 Exploded View CP200 Series.
ITEM PART NO. DESCRIPTION QTY. 16C 08456 Tension Screw 3 16 D 07676 Copper Gasket 3 16D 07204-0100 Copper Gasket (CP230 only) 3 16E 06823 P l u nger Extension (CP230 only) 3 1 7 08442 Wrist Pin 3 1 8 .
8 Rep air Kit s CP200 Series Plunger Packing Kit Part # 09554 Item # Part # Description Qty . 2 3 08087 V -Sleeve, weep 3 2 3 A 08087-0020 V -Sleeve, brown 3 2 4 07904 Pressure Ring 3 Oil Seal Kit Part # 09144 Item # Part # Description Qty .
9 NOTE: Always take time to lubricate all metal and nonmetal parts with a light film of oil before reassembly. This step will ensure proper fit, at the same time protecting the pump nonmetal parts (i.
10 Reassembly sequence of the CP200 pump s 1) If oil seals (19) were removed, replace with seal lip towards crankcase. Lubricate seals before replacing. 2) Replace seal case (20) with o-rings (21) over plungers. Generously lubricate o-rings and oil seal before reassembly .
11 Preventative Maintenance Check-List & Recommended Spare Parts List Check Daily W eekly 50hrs Every Every Every 500 hrs 1500 hrs 3000 hrs Oil Level/Quality X Oil Leaks X W ater Leaks X Belts, Pu.
GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free from defects in workmanship and material as follows: 1. For portable pressure washers and self-serve car wash applications, the discharge manifolds will never fail, period.
An important point after buying a device Giant CP220 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Giant CP220 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Giant CP220 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Giant CP220 you will learn all the available features of the product, as well as information on its operation. The information that you get Giant CP220 will certainly help you make a decision on the purchase.
If you already are a holder of Giant CP220, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Giant CP220.
However, one of the most important roles played by the user manual is to help in solving problems with Giant CP220. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Giant CP220 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
