Instruction/ maintenance manual of the product TLM-100MST Gianni Industries
Go to page of 2
Direct use of card (ISO Card Specification) can be installed in the rooms main electrical switch, a 20 sec. Gap after card take out, ensures that the customer room is safe.
The DBR-200 Relay module is worked when power input then contacts will change over from N/C (Normally Close) to N/O (Normally Open) The ABD-1 10 timer allows for timed or latched functions of the relay . In timer mode, the unit can in a x1 mode, (the timer is set between 1 and 60 seconds.
An important point after buying a device Gianni Industries TLM-100MST (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gianni Industries TLM-100MST yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gianni Industries TLM-100MST - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gianni Industries TLM-100MST you will learn all the available features of the product, as well as information on its operation. The information that you get Gianni Industries TLM-100MST will certainly help you make a decision on the purchase.
If you already are a holder of Gianni Industries TLM-100MST, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gianni Industries TLM-100MST.
However, one of the most important roles played by the user manual is to help in solving problems with Gianni Industries TLM-100MST. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gianni Industries TLM-100MST along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
