Instruction/ maintenance manual of the product P-MU-982-10 Gianni Industries
Go to page of 4
Copyright All Rights Reserved. P-MU-982-10 Ver. A Publish:2004.05.01 Page: 1/ 4 981-10 and 982-10 Easiprox Sp lit (separate controller and reader)Stand-Alone Proximity Access Control System GENERAL DESCRIPTION The “Easiprox Split” system is a low cost stand-al one programmable access control sy stem based on the EM400x proximity tags and cards.
Copyright All Rights Reserved. P-MU-982-10 Ver. A Publish:2004.05.01 Page: 2/ 4 added to memory. Once all the requi red tags have been presented, read th e Master Tag to return to the RUN state. Delete Tags To remove a tag from the system, that tag m ust be available or the Ta g Simulator must be used.
Copyright All Rights Reserved. P-MU-982-10 Ver. A Publish:2004.05.01 Page: 3/ 4 READHEAD Note When using a strike with DC, the relay c ontacts will be damaged by arci ng due to back EMF when the contact opens. Use a IN4 001 diode as shown on the drawing to prevent this dama g e.
Copyright All Rights Reserved. P-MU-982-10 Ver. A Publish:2004.05.01 Page: 4/ 4 read head should be mounted on n on-metallic materials. If the unit is mounted on a metal surface the reading di stance will be reduced. (Approx. 70 %) Multiple read heads The radiated field of the Easiprox coil extend s in all directions including through brick walls.
An important point after buying a device Gianni Industries P-MU-982-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gianni Industries P-MU-982-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gianni Industries P-MU-982-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gianni Industries P-MU-982-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Gianni Industries P-MU-982-10 will certainly help you make a decision on the purchase.
If you already are a holder of Gianni Industries P-MU-982-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gianni Industries P-MU-982-10.
However, one of the most important roles played by the user manual is to help in solving problems with Gianni Industries P-MU-982-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gianni Industries P-MU-982-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
