Instruction/ maintenance manual of the product AD-425S Gianni Industries
Go to page of 20
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 1/ 20 AD-425S Automatic Door Operator Instruction Manual General Safety Precautions z This instruction manual is intend ed sole ly for use by qualified professionals. All installation s, electrical connections and adjustments must follow the inst allation instructions.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 2/ 20 z Make sure the volt age specified as correct for the device. z Must provide at least 10 seconds rest ti me between every restarting cycle to ensure adequate residual current can be return ed to power system.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 3/ 20 All Packing materials 1. Construction Name ○ 1 C o v e r ○ 2 M o t o r ○ 3 Reducer ○ 4 Square Couplings ○ 5 Control Board ○ 6 Battery ○ 7 Power Switch ○ 8 Operating Arm ○ 9 Sliding Rail ○ 10 S topper Ball ○ 1 1 Baseplate ○ 12 T ransformer 2.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 4/ 20 3. Control Board Guide Input/Output Cont act Explanation Remark Make sure the input is use d corre ctly (AC1 10 or 220V). When turn on the power switch, it enters a learning mode.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 5/ 20 Input/Output Contact Explanation Remark Jumper 1-2 is N.C. cont act. N. C. (default) Jumper 1-3 is N.O. conta ct. N. O. (default) Jumper 1-8 is N.C., or using the “OPEN” switch.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 6/ 20 The opening, closing and maintain -open time illustration table. VM (Opening and Closing T im e Adjustment ) Opening.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 7/ 20 5. S pecification Power Input 1 10V (or 220V) AC ， 50-60H z Current (See Figure 2 ) 3.5A max., 0.6A average T orque 30Nm Opening/Closing time (VM) 4.5~9.5 s （ 90° ） Maintain - Op en time (TC) 1~35 seconds Battery S pecification 12V 1.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 8/ 20 Installation instructi ons z Refer to figure 3 for in-swing door (ri ght -hand).
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 9/ 20 Figure 5 : For right-hand and out-swing door . F/R switch set 「 ON 」 . Operating Arm mount s to left-side. Figure 6 : For left-hand and out-swing d oor . F/R switch set 「 1 」 .
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 10/ 20 z Figure 1 1~13 showing a n operator in stallation of a minimum door leaf wid th and a maximum opening angle. The opening angle is recommend ed not excess to 120 ∘ .
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2 008.07.1 1 Page: 1 1/ 20 AD-425S T emplate Installation Instruction Figure 17 Out-swing door (Right-Hand Open) Figure 18 Out-swing door (L.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 12/ 20 Inst allation Step s Out-swing door ( Right-Hand O pen ) S tep Figures Explanation S tep 1. Place the AD-425S template to the right position on the door header . See the figure presented for an out-swing door (Right-Hand Open), more det ails shown in Figure 17.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 13/ 20 S teps Figures Explanation S tep 7. Use Allen Wrench to tighten the Blind Nut. This will compress the sc rew so that it remains permanently fixed in the hole. Repeat these step s on other Blind Nuts.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 14/ 20 S teps Figures Explanation S tep 12. Use Allen Wrench to tighten the Blind Nut. This will compress the sc rew so that it remains permanently fixed in the hole. Repeat these step s on other Blind Nuts.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 15/ 20 S teps Figures Explanation S tep 18. T ighten screws. S tep 19. Insert screws (6 x 95 mm) to the Oper ating Arm on Square See the figure present e d for a out-swing door (Right-Hand Open), more det ails shown in Figure 9.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 16/ 20 S teps Figures Explanation S tep 24. Fix the Sliding Rail on the door leaf. (Screw specification: 6 X 20 mm) S tep 25. Slide in the Sliding Rail Cover . S tep 26. Attach two Side Ends.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 17/ 20 S teps Figures Explanation S tep 30. First opening movement, the AD-425S will b e automatically set the opening angle and dist ance. S tep 31. Attach the cover . S tep 32.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 18/ 20 T rouble shooting Problem Possible Cause Solution No AC power Make sure the Control Board an d fuse are working properly and connected properl y . Motor have no power (LED motor light not on.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 19/ 20 Problem Possible Cause Solution Safety devices are on Contact you r local distributor to check the Photocell and Safety Device. (ke ep the device clean) The door automatically open but doesn’t close.
Copyright All Rights Reserved. P-MU-AD425S V er . A Publish:2008.07.1 1 Page: 20/ 20 General Safety Precautions The following precautions are e ssential for the user . z Read the precaution below carefully as it cont ains imp ortant information about safe inst allation and maintenance.
An important point after buying a device Gianni Industries AD-425S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gianni Industries AD-425S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gianni Industries AD-425S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gianni Industries AD-425S you will learn all the available features of the product, as well as information on its operation. The information that you get Gianni Industries AD-425S will certainly help you make a decision on the purchase.
If you already are a holder of Gianni Industries AD-425S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gianni Industries AD-425S.
However, one of the most important roles played by the user manual is to help in solving problems with Gianni Industries AD-425S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gianni Industries AD-425S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
