Instruction/ maintenance manual of the product NEOX400-210T Genz-Benz
Go to page of 6
NEOX400-210T OWNER’S M A NU A L CONGRA TUL A TIONS ! Your new NEOX400-210T Combo i s designed w i th the po w er, features and perform ance that today’s profession al bassists desire.
T ECHNICAL INFORM A T ION The f irst stage of t he NEOX400-210 T preamp us es a low noise bi- f et linear scaling amplifier with a 2 pole low cut point at 23 Hz to prevent excessiv e speaker cone excursion and int ermodulation distortion. Additional band width roll-off is provided at 20 kHz f or RFI suppression.
features may be provided wit h the active pickup, such as equalization, volume co nt rol and compress ion. Tuner Output Jack — The “ tuner output jack is provided to allo w a tuner to remain pl ugged in to the ampli f ier while playing.
LED will illuminate for approx imately 3 seconds dur ing powe r switc h-on and switch-o ff. It is normal f or this LED to glow while continuing to m on itor the internal conditions for abou t 3 seconds after the pro tection relay has closed. It will also illuminate during any internal f ault cond ition.
cho rus, delay and rever b processors) require that the signal f low out o f the send jack on the amplifi er, through the unit where it i s split into a dry ( unaltered) signal and a wet (processed) signal.
Rev. 1 CAUT IONS • Never set an ampli f i er on anything that will tip over or collapse under its weight. • These ampli f iers are capable o f producing s ound pressure levels t ha t may c ause pe rmanent h ea ring loss. • There are no user s ervice able parts inside these units.
An important point after buying a device Genz-Benz NEOX400-210T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genz-Benz NEOX400-210T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genz-Benz NEOX400-210T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genz-Benz NEOX400-210T you will learn all the available features of the product, as well as information on its operation. The information that you get Genz-Benz NEOX400-210T will certainly help you make a decision on the purchase.
If you already are a holder of Genz-Benz NEOX400-210T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genz-Benz NEOX400-210T.
However, one of the most important roles played by the user manual is to help in solving problems with Genz-Benz NEOX400-210T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genz-Benz NEOX400-210T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
