Instruction/ maintenance manual of the product 9.2 Genz-Benz
Go to page of 7
Owner ’ s Manual PRODUCT DESCRIPTION – The SHUTTLE ® 9.2 represents the 2nd generation of our widely acclaimed SHUTTLE ® series of light weight, high output bass ampliers.
FRONT P ANEL INPUT – The SHUTTLE ® 9.2 is equipped with a standard ¼” unbalanced input. The input sensitivity range is from 40 mV to 1.6 volts. The input impedance is >500K ohms.
3 ACTIVE EQUALIZA TION – The SHUTTLE ® 9.2 contains an active 3 band equalizer with sweepable parametric mid range frequency control. This equalizer , similar to those found on professional sound consoles, is a very useful tool. The low frequency EQ section is an 80 Hz shelving curve with 15dB of cut or boost.
REAR P ANEL DIRECT OUTPUT – An XLR balanced direct output is provided for connection to a P A system or directly into a recording studio console or A/D converter .
4 5 F AN COOLING – The chassis is cooled via a thermal sensing fan design. The fan is always ON but will increase in speed as demand on the amp increases. Do not obstruct the left or right chassis vents. SPEAKER OUTPUTS – The SHUTTLE ® 9.2 provides two Neutrik Speak-On™ connectors (wired 1+/1-).
6 SAFE OPERA TING REQUIREMENTS: • Never set an amplier on anything that will tip over or collapse under its weight. • Provide a minimum distance of 25.
7 Declaration of Conformity (89/336 EEC-EMC Directive) Manufacturer ’s Name: Genz Benz, a division of KMC Music Corporation Manufacturer ’s Address: 781 1 East Pierce Street Scottsdale, AZ 85257, U.S.A. Product T ype: Audio Amplier Model Number: SHUTTLE ® 9.
An important point after buying a device Genz-Benz 9.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genz-Benz 9.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genz-Benz 9.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genz-Benz 9.2 you will learn all the available features of the product, as well as information on its operation. The information that you get Genz-Benz 9.2 will certainly help you make a decision on the purchase.
If you already are a holder of Genz-Benz 9.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genz-Benz 9.2.
However, one of the most important roles played by the user manual is to help in solving problems with Genz-Benz 9.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genz-Benz 9.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
