Instruction/ maintenance manual of the product 250 Genz-Benz
Go to page of 7
GENZ BENZ - Model 250/500 Bass Amplifier (Page 1, Rev: 1/14/2006) GENZ BENZ ENCLOSURES 250/500 BASS AMPLIFIER OWNERS MANUAL (Rev: 1/14/2006).
GENZ BENZ - Model 250/500 Bass Amplifier (Page 2, Rev: 1/14/2006) Design Philosophy - With experience designing and manufacturing both ba ss guitar speaker cabinets and amplifiers, it became obvious that there is a large market for a bass amplifier that reproduces the natural tones of the instrument itself.
GENZ BENZ - Model 250/500 Bass Amplifier (Page 3, Rev: 1/14/2006).
GENZ BENZ - Model 250/500 Bass Amplifier (Page 4, Rev: 1/14/2006) Inputs - Two inputs are provided, passive and active . The passive input has a higher gain and input impedance which is tailored to the characteristics of passive pickups .
GENZ BENZ - Model 250/500 Bass Amplifier (Page 5, Rev: 1/14/2006) Tube Dynamics Controls - The harmonics and saturation controls , in conjunction with the tube gain control, allow additional control of preamp overdrive variables.
GENZ BENZ - Model 250/500 Bass Amplifier (Page 6, Rev: 1/14/2006) signal. On the processing unit, you will use the mix ed signal output to return the signals (both wet and dry) to the return jack on the amplifier.
GENZ BENZ - Model 250/500 Bass Amplifier (Page 7, Rev: 1/14/2006) A ground lift switch is provided which opens pin 1 (shield) on the direct output to prevent ground loops. Use the position that results in a minimum of noise. The output level is nominal line level (typ.
An important point after buying a device Genz-Benz 250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genz-Benz 250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genz-Benz 250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genz-Benz 250 you will learn all the available features of the product, as well as information on its operation. The information that you get Genz-Benz 250 will certainly help you make a decision on the purchase.
If you already are a holder of Genz-Benz 250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genz-Benz 250.
However, one of the most important roles played by the user manual is to help in solving problems with Genz-Benz 250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genz-Benz 250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
