Instruction/ maintenance manual of the product 12.2 Genz-Benz
Go to page of 9
Owner ’ s Manual PRODUCT DESCRIPTION – The SHUTTLE ® MAX 12.2 bass amplier has been designed with our unique ultra light unied design process, yielding a 1200 watt (2 x 600 watt) professional high powered tour-class bass guitar amplier weighing only 6.
FRONT P ANEL INPUT – The SHUTTLE ® MAX 12.2 is equipped with a standard ¼” unbalanced input. The input sensitivity range is from 40 mV to over 1.
PREAMP VOLUME CONTROL – This control sets the volume of the preamp after the input and FET channel gain stages and before the EQ controls. Use this control in conjunction with the GAIN control and the MASTER VOLUME control for your overall output level.
SIGNAL SHAPE – The SHUTTLE ® MAX 12.2 is equipped with 3 SIGNAL SHAPE circuits, each with a level control to adjust the amount of level the tone shaping circuit produces. L.F . BOOST – This lter adds low frequency peaking gain in the 35-65 HZ band range.
GENERAL GUIDELINES FOR SETTING YOUR INPUT SIGNAL – There are a wide variety of variables that can impact your signal and tone in the design of all ampliers. Below are some basic guidelines to consider when begin- ning to set your tone on the SHUTTLE ® MAX 12.
EFFECTS LOOPS – The serial EFFECTS LOOP jacks are provided to allow access to the signal for the purpose of inserting signal processing equipment such as compressors, chorus, delay , and reverb processors. Individual pre- EQ loops are provided for the TUBE channel and the FET channel.
6 7 POWER INPUT – VOL T AGE SELECTOR SWITCHES - The SHUTTLE ® MAX 12.2 utilizes selectable universal power supplies that operate from 100V to 240 volts, 50 to 60 Hz for worldwide use. Simply set the voltage selector switch to the appropriate AC mains voltage (BEFORE connecting to the power source).
8 Specications SAFE OPERA TING REQUIREMENTS: • Never set an amplier on anything that will tip over or collapse under its weight. • Provide a minimum distance of 25.4 mm (1 inch) around all sides of the amplier for sufcient ventilation.
9 Declaration of Conformity (89/336 EEC-EMC Directive) Manufacturer ’s Name: Genz Benz, a division of KMC Music Corporation Manufacturer ’s Address: 781 1 East Pierce Street Scottsdale, AZ 85257, U.
An important point after buying a device Genz-Benz 12.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genz-Benz 12.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genz-Benz 12.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genz-Benz 12.2 you will learn all the available features of the product, as well as information on its operation. The information that you get Genz-Benz 12.2 will certainly help you make a decision on the purchase.
If you already are a holder of Genz-Benz 12.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genz-Benz 12.2.
However, one of the most important roles played by the user manual is to help in solving problems with Genz-Benz 12.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genz-Benz 12.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
