Instruction/ maintenance manual of the product IWP Super Series Genie
Go to page of 28
Operator’ s Manual Second Edition Fourth Printing Part No. 48643 with Maintenance Information.
Genie IWP Super Series P ar t No . 48643 Operator’s Manual Second Edition • Fourth Printing Copyright © 1996 by Genie Industries. First Edition: Fifth Printing, November 1997 Second Edition: Fourth Printing, January 2002 "Genie" and "IWP" are registered trademarks of Genie Industries in the U.
P ar t No. 48643 Genie IWP Super Series 1 Operator’s Manual Second Edition • Fourth Printing Safety Rules Dange r F ailure to obey the instructions and saf ety r ules in this manual will result in death or ser ious injur y .
2 Genie IWP Super Series P ar t No . 48643 Operator’s Manual Second Edition • Fourth Printing SAFETY RULES Tip-over Hazards Do not raise the platform unless the machine is on a firm, level surface. Do not move the machine while the platform is raised.
P ar t No. 48643 Genie IWP Super Series 3 Operator’s Manual Second Edition • Fourth Printing SAFETY RULES Electrocution Hazards This machine, even with an optional fiberglass platform, is not electrically insulated and will not provide protection from contact with or proximity to electrical current.
4 Genie IWP Super Series P ar t No . 48643 Operator’s Manual Second Edition • Fourth Printing Allow for platform movement, electrical line sway or sag and movement due to strong or gusty winds.
P ar t No. 48643 Genie IWP Super Series 5 Operator’s Manual Second Edition • Fourth Printing Outreach Option Saf ety Bodily Injury Hazar d Keep hands and feet away from moving parts: mounting plate, locking bracket and extension arms.
6 Genie IWP Super Series P ar t No . 48643 Operator’s Manual Second Edition • Fourth Printing SAFETY RULES Battery and Charger Safety - DC Models Burn Hazar ds Batteries contain acid. Always wear protective clothing and eyewear when working with batteries.
P ar t No. 48643 Genie IWP Super Series 7 Operator’s Manual Second Edition • Fourth Printing Contr ols Ground Controls 3 8 Platform Controls - ANSI & CSA 1 Interlock display lights (four) 2 Ke.
8 Genie IWP Super Series P ar t No . 48643 Operator’s Manual Second Edition • Fourth Printing Leg end 11 AC outlet 12 DC models: Battery quick disconnect 13 DC models: Battery pack 14 Footpad 15 T.
P ar t No. 48643 Genie IWP Super Series 9 Operator’s Manual Second Edition • Fourth Printing Pre-operation Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations.
10 Genie IWP Super Series P ar t No. 48643 Operator’s Manual Second Edition • Fourth Printing Pre-operation Inspection o Be sure that the operator's, safety and responsibilities manuals are complete, legible and in the storage container located on the mast.
P ar t No. 48643 Genie IWP Super Series 11 Operator’s Manual Second Edition • Fourth Printing Maintenance Observe and Obey: Only routine maintenance items specified in this manual shall be performed by the operator.
12 Genie IWP Super Series P ar t No. 48643 Operator’s Manual Second Edition • Fourth Printing MAINTENANCE Scheduled Maintenance Maintenance performed quarterly, annually and every two years must b.
P ar t No. 48643 Genie IWP Super Series 13 Operator’s Manual Second Edition • Fourth Printing Function T ests Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations.
14 Genie IWP Super Series P ar t No. 48643 Operator’s Manual Second Edition • Fourth Printing Test Interlock System 9 Pump the foot pedal to raise the base. Result: The two foot pad display lights should be off. 1 0 Pull the base lowering handle to lower the base.
P ar t No. 48643 Genie IWP Super Series 15 Operator’s Manual Second Edition • Fourth Printing a b a b Test Auxiliary Platform Lowering 2 0 Raise the platform slightly. Result: The inner frame wheels should lift off the ground. 2 1 Disconnect the power source from the machine.
16 Genie IWP Super Series P ar t No. 48643 Operator’s Manual Second Edition • Fourth Printing W orkplace Inspection Fundamentals The Workplace Inspection helps the operator determine if the workplace is suitable for safe machine operation. It should be performed by the operator prior to moving the machine to the workplace.
P ar t No. 48643 Genie IWP Super Series 17 Operator’s Manual Second Edition • Fourth Printing Operating Instructions Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations.
18 Genie IWP Super Series P ar t No. 48643 Operator’s Manual Second Edition • Fourth Printing OPERATING INSTRUCTIONS Emergency Stop 1 Push in the red Emergency Stop button at the platform controls or at the ground controls to stop the up function.
P ar t No. 48643 Genie IWP Super Series 19 Operator’s Manual Second Edition • Fourth Printing Outreach Option Operating Instructions 1 Lift up on the locking bracket. 2 Rotate the handle clockwise to extend the platform. Rotate the handle counterclockwise to retract the platform.
20 Genie IWP Super Series P ar t No. 48643 Operator’s Manual Second Edition • Fourth Printing OPERATING INSTRUCTIONS Battery and Charger Instructions Observe and Obey: Do not use an external charger or booster battery. Charge the battery in a well-ventilated area.
P ar t No. 48643 Genie IWP Super Series 21 Operator’s Manual Second Edition • Fourth Printing Observe and Obey: Common sense and planning must be applied to control the movement of the machine when lifting it with a crane or forklift. The transport vehicle must be parked on a level surface.
22 Genie IWP Super Series P ar t No. 48643 Operator’s Manual Second Edition • Fourth Printing Decals Decal Inspection Use the pictures on the next page to verify that all decals are legible and in place. Below is a numerical list with quantities and descriptions.
P ar t No. 48643 Genie IWP Super Series 23 Operator’s Manual Second Edition • Fourth Printing DECALS Outreach Option Note: Platform decals may be in diffferent locations on optional fiberglass basket.
24 Genie IWP Super Series P ar t No. 48643 Operator’s Manual Second Edition • Fourth Printing Specifications Model IWP-20S IWP-25S 1 IWP-30S Height, working maximum 26 ft 5 in 30 ft 5 in 35 ft 6 in 8.1 m 9.3 m 10.8 m Height, platform maximum 20 ft 5 in 24 ft 5 in 29 ft 6 in 6.
P ar t No. 48643 Genie IWP Super Series 25 Operator’s Manual Second Edition • Fourth Printing Ambient operating -20°F to 135°F temperature -29°C to 57°C Airborne noise emissions 80 dB Maximum .
Genie North America Genie Australia Pty Ltd. Genie China Genie Malaysia Genie Japan Genie Korea Genie Africa Genie Latin America Phone T oll Free Fax Phone + Fax + Phone + Fax + Phone + Fax + Phone + Fax + Phone + Fax + Phone + Fax + Phone + Fax + 425.
An important point after buying a device Genie IWP Super Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genie IWP Super Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genie IWP Super Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genie IWP Super Series you will learn all the available features of the product, as well as information on its operation. The information that you get Genie IWP Super Series will certainly help you make a decision on the purchase.
If you already are a holder of Genie IWP Super Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genie IWP Super Series.
However, one of the most important roles played by the user manual is to help in solving problems with Genie IWP Super Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genie IWP Super Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
