Instruction/ maintenance manual of the product 3064H Genie
Go to page of 27
PN# 37026500 0 17 , 3/30/2009 Includes INTELLICODE ® 2 Remote Control. Safe-T -Beam ® System must be installed to close door . Homelink ® and Car2U ® compatible.
©2010 The Genie Company 12/2010 2 SAFET Y INFORMA TION IMPORT ANT SAFET Y INSTRUCTIONS READ AND FOLL OW ALL INSTRUCTIONS SA VE THESE INSTRUCTIONS C ONVENTIONS USED IN THESE INSTRUCTIONS Garage doors are large , heavy objec ts that mov e with the help of springs under high tension and electric motors.
SAFET Y FEA TURES Safe-T-Beam® (STB) Non-Contact Rev ersing System Puts an in visible beam across the door opening . T he door stops and reverses to the full open position if an ything passes through the beam. LED indicator lights on the powerhead and on the STBs pro vide a self diagnostic code if an operational problem exists.
T ABLE OF C ONTENTS Sec tion .................................................................................... P age Safety Information .................................................................................................... 2 Opener F eatures & Safety F eatures .
Begin here af ter the opener's ph ysical assembly and installation has been c ompleted . Ther e are no assembly or installation steps included in this manual. C ontact your Genie® P rofessional Dealer f or an installation poster , if required , or visit www .
W ARNING • Make sure doorway is in vie w and clear of obstacles and people to av oid injur y or damage to property . • DO NO T operate this unit fr om wall console befor e LIMITS and FORCE are set. Severe damage to the opener can occur . • Shuttle MUST be engaged to carriage BEFORE setting limits.
©2010 The Genie Company 12/2010 7 P R OGRAM S ET — SEE long Blue LED flashing 6 W atch door mov e R A M S ET — + B) OPEN DOOR TRA VEL LIMIT NOTICE IF D OOR BEC OMES OBS TRUC TED I PU LL DO WN O N HA NDLE DOOR CL OSES DOOR OPENS Door Limits are set.
©2010 The Genie Company 12/2010 8 1 2 3 4 C ONT ACT REVERSE TEST The F orce and Limit settings on the previous page MUST be C OMPLETED before C ontact Reverse testing . 1. T est. • Open garage door using wall console. – Place a 2" x 4" boar d (laid flat) under center of garage door opening .
©2010 The Genie Company 12/2010 9 PROGRAM S ET — + PROGRAM S ET — + PROGR AM INTELLIC ODE® 2 REMO TE T O POWERHEAD FOR HELP-1-800-35-GENIE OR WWW .GENIECOMP ANY .COM 2 PRESS and HOLD SEE BO TH Blue LEDs come ON SEE round Blue LED come ON SEE long Purple LED flashing RELEASE 1 2 3 4 5 6 7 The next press of the remote will operat e door .
©2010 The Genie Company 12/2010 10 PROGRAM S ET — + PROGRAM S ET — + PRESS and HOLD SEE BO TH Blue LEDs come ON SEE one Blue LED come ON PRESS and release a previously progr ammed Genie® IntelliCode® 2 r emote button on remote . If you are unsure which remote y ou hav e see page 16.
Release Handle Poignée de dév errouillage Palanc a de liberación POWER HEAD TÊTE DE PUISSANCE CABEZA DE LA ENERGÍA Po wer C ord Cordon de secteur Cable eléctrico Door Arm Bras de la porte Brazo .
©2010 The Genie Company 12/2010 12 NOTICE IF D OO R B EC OM ES OB ST RU CT ED I PU LL D OWN O N HAN DL E T YPICAL SECTIONAL DOOR INST ALLA TION .......... FOR HELP-1-800-35-GENIE OR WWW .GENIECOMP ANY .COM INST ALLA TION T YPIQUE SUR UNE PORTE SECTIONELLE .
©2010 The Genie Company 12/2010 13 SECTIONAL DOOR PORTE SECTIONELLE PUERT A SECCIONAL ONE PIECE DOOR PORTE D’UNE PIÈCE PUERT A DE UNA SOL A PIEZA NOTICE IF DO OR BEC OME S OB ST RUC TED I PU LL DO.
©2010 The Genie Company 12/2010 14 SET PROGRAM Open Tr av e l Button ROUND LED Indicator (Light) F acing Garage Door L ONG LED Indicator (Light) Close Tr av e l Button O VERVIEW OF PO WERHEAD C ONTR OLS This section describes the simple programming functions.
©2010 The Genie Company 12/2010 15 O VERVIEW - REMO TES AND OPTIONS 5 FC C and IC CERTIFIED This device complies with FC C Part 15 and RSS 210 of Industr y C anada. This equipment has been tested and f ound to comply with the limits for a Class B digital device , pursuant to P ar t 15 of the FC C Rules.
©2010 The Genie Company 12/2010 16 3. Press the same button twice to toggle IntelliC ode® selection from IntelliCode® 2 to IntelliC ode® 1. INTELLIC ODE® FEA TURES Other models of G enie® garage door openers , remotes , and wireless keypads use IntelliC ode® 1 signals to communicate .
©2010 The Genie Company 12/2010 17 MAINTENANCE & TR OUBLESHOO TING FOR HELP-1-800-35-GENIE OR WWW .GENIECOMP ANY .COM 6 If you hav e any questions , please do not hesitate to contact customer ser.
• With the door closed, pull release handle DOWN and let go to release door carriage assembly from drive syst em. • Raise door manually approximately 3’- 4’ and release. – Door should remain stationar y or mo ve very slightly . – If door moves quickly , C ONT A CT A TRAINED DOOR SY STEM TECHNICIAN .
NOTICE I F D OO R B EC O ME S O B ST R UC T ED P UL L D O WN O N H A ND L E TO RELEASE SHUTTLE: 1. Pull DOWN on handle and let go . 2. Raise or lower door manually . DOOR PULL TO ENGA GE SHUT TLE: 1. Pull DOWN on handle and let go . 2. Raise or lower door using remote or wall console .
©2010 The Genie Company 12/2010 20 Independent Light Control Button Controls door opener lights fr om inside garage Sure-Lock™ Button – L OCK disables controls after door is complet ely closed .
This area left blank ©2010 The Genie Company 12/2010 21 REMO TE BA T TER Y REPL A CEMENT Replace remote batt er y with a CR 2032 coin c ell battery . 1. Open the remot e case using a washer or coin that fits into the slot at the top of the remot e. 2.
©2010 The Genie Company 12/2010 22 ADJUSTMENT GUIDE - SPEED SETTINGS FOR HELP-1-800-35-GENIE OR WWW .GENIECOMP ANY .COM Speed settings are pre-progr ammed at the factor y for the maximum speed . Speed settings should not need adjustment with this unit.
©2010 The Genie Company 12/2010 23 ADJUSTMENT GUIDE - FORCE SET TINGS FOR HELP-1-800-35-GENIE OR WWW .GENIECOMP ANY .COM F orce settings are pre-programmed at the factory and "learned" during the Open/Close Limit settings steps. Some additional For ce may be increased .
PROBLEM WHA T TO DO Opener does NO T run from wall c onsole. • Check power source , – Plug a lamp into outlet used for pow erhead. I f lamp w orks, power sourc e is OK. – If not, check fuse or circuit breaker . • I f po wer is OK, – Check connections at powerhead terminals and at wall console .
PROBLEM WHA T TO DO Noisy operation. • Be sure all door fasteners are tight. • Be sure garage door is in good repair , properly lubricated and balanced . • Be sure opener is in good repair . Door opener runs slow . • Check operating condition of door .
6 5 4 3 2 1 12 3 7 6 POWER CORD CORDON DE SECTEUR CABLE ELÉCTRICO CONNECTOR CONNECTEUR CONECTADOR WHITE BLANC BLANCO BLACK NOIR NEGRO GREEN VERT VERDE WHITE BLANC BLANCO WHITE BLANC BLANCO BLACK NOIR.
GMI Ho ldings, Inc. d/b /a Th e Genie Company ("Seller ") warr ants to the orig inal pur chaser o f the be low iden tified resident ial gara ge door opener , T riloG ™ 1200 (Model 3064 an .
An important point after buying a device Genie 3064H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genie 3064H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genie 3064H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genie 3064H you will learn all the available features of the product, as well as information on its operation. The information that you get Genie 3064H will certainly help you make a decision on the purchase.
If you already are a holder of Genie 3064H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genie 3064H.
However, one of the most important roles played by the user manual is to help in solving problems with Genie 3064H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genie 3064H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
